REPAIRS TO HARDSTANDING, FENCING, DRAIN AND MISC B/R ITEMS IN AREA-II AND AREA-III UNDER AGE B/R-II AT KAMPTEE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for 100mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for chequered tiles 300 x 300 x 25mm thick, glossy, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment M-35 Grade etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade etc with grey cement and pigment complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 (using 20mm graded stone aggragate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces with CM (1:4) finished fair and even complete all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Cleaning of sludge/ soil etc accumulated in existing drain and thrown away the soil in low lying area exc 50m upto a distance of 250m complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM (1:6) (reinforcement measured and paid separately) complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

All as per item No 22 above but 6 to 8mm dia complete all as specified and directed.

Dismantling posts or sturt (wood, steel or RCC) any section, including taking out embeded portion, embeded in concrete and making good to disturbed ground complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC precast fencing post, in cement concrete (1:2:4) type B-l, (Nominal Mix) (using 20mm graded stone aggregate) average cross sectional area exc 100 sqcm and not exc 250 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and as directed.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work complete all as specified and directed.

Dismantling of old barbed wire of any description from RCC fencing post, complete all as specified and as directed. (Note:- Each line of wire shall be measured).

S&F in galvanised two strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolt including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Dismantling fencing / wire mesh, any type complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc 10 cm in width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.83,658.00]

vidhamal&sons

M/S J.A CHAWHAN

NORTH INDIA PEST CONTROL

Bidder Name

M/S J.A CHAWHAN

vidhamal&sons

M/s Jagdish Staioners and General Stores

NORTH INDIA PEST CONTROL