WBPWDTE/EE/BED/NIQ_32/Q of 2025-26

Amount

Supply and fixing double door Horizontal TPN MCB Distribution board with 11-42/43 protection, concealed in the wall after cutting the wall & mending good the damages to original finish incl. Interconnection D-10 with damages to original finish incl. Interconnection with suitable size of No copper wire and neutral link & provision for earthing attachment as to GS. (Make-SEIMENS/SCHNEIDER/Lauritz Knudsen (L&T) 8 way Encloser

Supplying and fixing double door sheet steel (16SWO), powder coated cable end box for TPN DB enclosure with IP-42/43 protection, on angle Papeiron frame on wall && mending good the damages to original finish with D-13 nuts bolts etc incl. provision for earthing attachment as to GS. [Make SEIMENS/SCHNEIDER/Lauritz Knudsen (L&T)] 8 way HTPN

Supplying and foxing 240/415 V Isolator on din rail of existing DBs and necessary connection as to GS (Make-SEIMENS/SCHNEIDER/Leurita Knudsen (L&T)] 415 V, 63A FP

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as to GS. [Make-SEIMENS/SCHNEIDER/Lauritz Knudsen (L&T)] 6A 32A SP MCB

Supply and Drawing 1.1 KV single core stranded 'FRLS PVC insulated & unsheathed copper wire (Make: Gloster/Havells/Polycab/RR) of following sizes in thick heavy gauge polythene pipe and necy. connection as required incl. cutting channel of 34 (40mmx40mm)/(43mmx43mm)size on masonary wall with S&F heavy Par gauge 19mm/25mm dia 3mm thick polythene pipe by means of iron hooks and mending good damages to building works. 2 x 4 sqmm+1x2.5sqmm (for AC)

Supplying of following sizes Al. armoured PVC/XLPE (Make: Havells/Glostar/RR/ POLYCAB) as per direction of EIC 4 core 35sqmm

Laying of cable from 3.5C 35sq.mm to 50 sq.mm on wall/surface Pages including 3 & FMS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. 4 core 35sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of NXLPE/PVC armoured cables as below 4 core 35 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 cere 35 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes, as per GS. 4.0 sq mm

S&F 240V 25A OLP 3+30A Electronic motor starter in a suitable size 16 SWG MS Box coneled in wall with bakelite top cover incl. Necy Conncetion as per direction of EIC for AC Machines

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make-Legrand/Crabtree/Wipro/Goldmedal), without plug top and switch with 2 Module Gl Modular type switch board with top cover plate flushed in wall and making necy, connections with PVC Cu wire and earth continuity wire etc as per G.S.

Supply & Pixing 240 V,25 A, 3 pin Modular type plug top with indicator Make- Legrand/Crabtree/Wipro) & necy. Connections.

Supply & Pixing 2 nos 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board No embedded in wall incl. S & F required size MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after No making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply and and delivery of Non-inverter wall mounted SPLIT room air conditioner having the following major specifications:- (a) Minimum ISEER Rating 3.5 or higher (b) Minimum Cooling capacity required: Upto 24000 BTU/Hr. Or Higher (c) Rated voltage-230v+/-5%, Frequency-50Hz (d) Compressor type-Rotary. (e) Mini. Room Discharge air flow rate- 650 CPM or higher (f) Condenser tube-Copper condenser coil g) Minimum Tonnage required: 1.9 TR or higher. h) Refrigarent-R32/R410A Cordless Remote arrangement with all modernized provision of temperature settings, Fan speed option[low/medium/high), Auto swing. Air direction setting, Timer facility, Turbo operation setting, Air ventilation arrangement, and others. Incl. delivery charges. (Make:-Hitachi/Daikin/Mitsubishi Electric)

Installation, Testing & commissioning of 1.5/2.0 Tr. Bplit type AC both indoor/outdoor unit incl. S& F of 40 X 40 X 5 mnum MS angle iron frame for installation of ODU and sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages to complete the installation as per direction of EIC.

Supply, Fixing and laying of:- (i)gauge copper pipe 5/8" 0.7 mm thick for suction (ii) copper pipe 1/4" 0.6 mm thick for discharge (OEM make) with 9 mm thick thermal insulation forum both for suction & discharge pipe and mending good the holes & damages as directed by EIC. (extra length for distance of ODU & IDU exceed 3 mtr).

Supply & Laying 4 core 2.5 sqmum PVC insulated & unarmoured copper cable (make Finolex/Havells/GLOSTER) for 1.5/2 Tr. Split AC machine (extra length for distance of ODU & IDU exceed 3 mtr.)

S&F of flexible PVC high quality water carrying pipe of proper size for draining water from already installed AC to any available drain water pipe or near to ground level and the pipe must be properly saddled with the wall incl proper insertion of the flexible pipe to drain water pipe and sealing the entry with required materials like PVC tape, High quality sealing the entry with required materiale like PVC tape, high quality sealing gum ete, as reqd. All these Arrangement for fixing must be arranged by the agency itself as per direction of EIC

Supply and Delivery of Timer DB:- 1) 230V, Upto 16 A capacity 24 Hrs Analog Electromechanical Time Switch (Make Lauritz Knudsen (LAT) Cat No:-AUTS03ANAO0/Seimens/Schneider) 2) 2 Pole Power Contrcator (L&T-MNX 22-2P Cat No CS90238/SEIMENS/SCHNEIDER 3) 20A SP MCB (Make SEIMENS/SCHNEIDER/Lauritz Knudsen (L&T) 4) 32A DP Isolator. (Make SEIMENS/SCHNEIDER/Lauritz Knudsen (L&T) 5) Toggle Switch (Make-Make-SEIMENS/SCHNEIDER/Lauritz Knudsen (L&T) or equivalent make) 6) (2-12 Way) SPNDB Make-SEIMENS/SCHNEIDER/Lauritz Knudsen (L&T) 7) Bakelite base with FP bolt type stud/Terminal block incl S&F Neutral Bar etc with this box for termination of power. 8) The complete arrangement must be wiring by 2.5/4 Sq mm PVC insulated Cu wire(Make: Gloster/Polycab/Havells) with suitable length inci socketing/lugs etc as per requirement & direction of EIC (Make-SEIMENS/SCHNEIDER/Lauritz Knudsen (L&T)

R.K.ENTERPRISE (BID ID -7235514)

DURGAPUR POWER (BID ID -7259412)