trash racks and gates

Amount

Providing/Fabrication and fitting of complete 2 ton cap. new winch machines (duly painted with 01 coat of red oxide primer and 02 coats of paint of light blue color including 01 no. worm gear, 01 No. main/spur gear, 01 No. Stem rod(standard length but however extended length up to 02 metres is required at some locations) with duly cut threads and drilled holes for its engagement with gate structure for smooth vertical operation of the gate, rain protection pipe to prevent seepage of water into the gear/junction box, lower and upper stem rod housings integrated with the gear/junction box, 02 Nos. bearings (as per the sample), fasteners, base plate, 01 No. regulating handle etc. as per the size and specifications of the dismantled machines and their constituent machinery parts.The job further comprises transporting the winch machines from the workshop to the road side near canal in a load carrier and further shifting from the road side to the installation site with the help of manual labor wherever necessary. Assembling and installation of the winch machines and its parts at respective sites in their embodiments with the help of necessary tools and tackles and testing the same on load after complete oiling and greasing of winch machine and other moving parts with good quality ISI marked lubricants for their smooth functioning required for the complete execution for replacement of winch machines at different locations. The job constitutes dismantling of complete old winch machines (2 ton cap.) installed on the Tawi/Ravi canal/distributary system from its hoisting with the help of necessary tools, tackles and other necessary equipments after removing and disposing the trash/bushes wherever necessary, and shifting all the material to the road side with the help of labour and further to the workshop in a load carrier The locations arementioned herein under :- DOL supwal, D-5MI, D-10 Balotrachak, D-3 MI (Right minor) The job further constitutes extraction of the completely damaged/ corroded trash rack at Greater Kailash with the help of crane and transportation/loading of old, badly damaged, corroded trash rack in private vehicle/load carrier with the help of crane and transporting the same to the workshop & again unloading with the help of labour/crane & other tools & tackles. The job also includes fabrication of new trash rack frame of size 2.6 x1.5 m made out of MS Angle 75x75x8. Fabrication of inner vertical strips made out of MS flat of 50 x 6 mm or higher for newly fabricated frame and their fitting by way of arc welding at an average equal distance of approx. 10”. Welding work is to be carried out using good quality electrodes, resisting water corrosion conforming to ISI specifications. Grinding and finishing of the welded portions with the help of precision tools in such a way so as to remove blow holes, weld deposits, weld residue, sharp edges etc. Application of two coats of anti corrosive red oxide primer followed by application of two coats of light blue paint. Transportation/loading of newly fabricated trash rack in private vehicle with the labour/crane and transporting the same to the road side & again unloading with the help of crane and shifting the trash rack from the road side to the syphon mouth and for the lowering of the trash rack into the grooved channel. Providing/ fitting of nuts/ bolts of required size specifications (as per sample) for holding the trash rack firmly/ robustly as a single composite structure in upright position. The job includes cost of material, skilled labour, hire charges of tools & tackles, crane, loading & unloading charges etc. Complete Job.

Vaibhav Engineers and Technocrates (BID ID -2209509)

GEETA ENGINEERING MECH WORKS (BID ID -2209983)