Tiruppur District Kangayam Block Construction of a New Community Hall Building at Nallamal puram AD Colony H/O Palayakottai .SFC (DP) 2024-25 pkg no 01

Amount

1.Construction of a New Community Hall Building at Nallamal puram AD Colony H/O Palayakottai (SF NO : 355/4A)

Construction of a New Community Hall

Earth work excavation and depositing on banks with initial lead and lift in gravelly soil stiff clay, hard stiff clay, murram, boulders mixed with gravel as per SS 20-B for foundation.

Filling M. Sand including cost and conveyance loading unloading from approved quarry to work site and labour charges for filling, ramming, etc. complete

For Foundation

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance, labour charges etc.

Brick work in CM 1:5 mix using Fly ash Bricks including cost and conveyance labour charges etc.

Upto Basement

Super Structure

Supply and errecting sheet centering of size 90 cm x 60cm 10 G sheet laid over silver oak joist and supported by casurina post of size 10 cm x 13 cm dia spaced at 75 cm center to center etc. complete

Upto Basement

Above Basement

Supply and fabrication of steel for RCC works including cost and conveyance charges etc

RCC 1 :1.5 : 3 mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., complete

Upto Basement

Above Basement

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the Top of Roof with one course of Pressed Tiles of size 20 cm x 20 cm x 2 cm laid in cement mortor 1 : 3 and pointing with the same mortor mixed with water proof compound including cost and conveyance off all materials and labour charges etc complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty should be got approved by the Executive Engineer

Plastering in CM 1:5, 12mm thick including cost and conveyance charges etc.,

Plastering in CM 1:4 20mm thick including cost and conveyance of all materials and labour charges etc. complete

Plain Cement Concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges etc. complete

Paving the floor with scrach proof ceramic tiles of any colour and any size laid in CM 1:2, 20 mm thickand pointing with white cement using 0.4kg/Sq m mixed with colouring pigments to suit colour of the tiles including finishing tec., complete

Paving the floor with scrach proof ceramic tiles of any colour and any size laid in CM 1:2, 20 mm thickand pointing with white cement using 0.4kg/Sq m mixed with colouring pigments to suit colour of the tiles including finishing tec., complete

Dadooing walls with glazed tiles of size 0.15 x 0.15 set with CM 1:2, 10 mm thick etc., complete

Supply of the following steel doors, windows and ventilators to Office, etc. complete

Main Door-d(3 nos)

Door-D1(3 nos)

Door-D2 PVC Door(5 nos)

Window -W(8 nos)

Window -W2(4nos)

Ventilator(8 nos)

Ventilator(6nos)

Supply of the following PVC pipes and PVC specials etc. complete For Seewage Line and Rainwater Down Fall Pipe with necessary bend ,shoes and clamp and labour charges etc complete

110mm PVC pipe

Supply of Manhole cover 60cm x 60 cm 2 Nos.

Painting Two Coats of OIL Bound Distember of approved colour over one Primer Coat including cost of Paint and labour charges etc complete

Painting Two Coats with exterior emulsion of approved colour over one Primer coat including cost of Paint and labour charges etc complete

Painting two coats with ready mixed paint including cost and conveyance charges etc.

Fixing Charges for Steel Door in Position etc complete

Supply and Fixing of Cudapah Slab of 25mm/40mm thick including cost and conveyance of all materials and labour charges etc complete

Fixing Charges for Steel Windows in Position etc complete

Construction of Dinning hall

Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundation

Hard gravelly soil

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation

Cement concrete 1:3:6 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation

Providing and laying of interlocking Concrete Paver Block having thickness of 50mm compacted over including cost and conveyance of all materials to site and all labour charges fetc complete

Refilling the Excavated Earth including all labour charges etc complete.

Filling the basement with Gritty Gravel including cost and conveyance of all materials to site and all labour charges etc complete.

Filling the basement with Sand Filling including cost and conveyance of all materials to site and all labour charges etc complete.

Brick work in cement mortar 1:5 mix using country bricks (23X11X7) including cost and conveyance of all materials to site and all labour charges etc complete.

Supplying and errection of centering for sides and soffits with M.S.sheet and country wood props including hire charges for materials and all labour charges etc complete

Below Ground Level

Slab centering

Column Centering

Sunshade Centering

Supplying and fabrication of steel including cost and conveyance of steel to site and cost of binding wire including all labour charges for cutting,bending, tying and forming grills for all works

Reinforced Cement concrete 1:1 1/2:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks

Waterhing Course with brick jelly line concrete using 20mm brick jelly with pure slacked lime over RCC Roof Slab in the proportion of 32:12.5 Complete complying with standard specification

Providing one course of Pressed tiles set on CM 1:3 mix using Pressed tiles of size 20x20x2cm including pointing with CM 1:3 mix including cost, conveyance and labour charges

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty should be got approved by the Executive Engineer

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete.

Supplying and fabrication of the following steel doors , window,Ventilators and counter including cost and conveyance and all charges etc complete.

Windows(1.50*1.30)

Windows(0.90*1.30)

Ventilators(0.90*0.60)

Fixing of the following steel doors , window,Ventilators and counter including cost and conveyance and all charges etc complete.

Paving the Floor with Vertified tiles of size 600x600x8mm including cost and Conveyance of all materials to site and all labour charges etc(1sqm)

Datooing of Walls with glazed tiles of size 15cm X 15cm X 6mm Layding Cement motor 1:2 10mm thick and Pointing with white cement using 0.4kg per cm2 including cost and convince of all materials to site and all labour charges etc.(1sqm)

Exterior and Interior Emulsion two coats with best approved Colour including cost of Painting priming coat over new plastered surface and conveyance of all materials to site and all labour charges etc complete.(1sqm)

Painting two coats over new iron works using ready mixed enamel paint including cost and all labour charges etc complete.

SUB ESTIMATE-Electrical Arrangement

Supplying and fixing 4'18 Wof CFL including all cost and conveyance to work site etc complete

Wiring with 2 x 1.5 Sq.mm PVC unheated SC allocable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable color for Concealed PVC light point / Fan Point SD 25

Wiring with 2 x 2.5 Sq.mm PVC unheated SC allocable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - interlocking C.S. Plug top with painting of suitable color for concealed PVC plug point.- SD -40.

power plug point SD 40

plug point SD 38

Supplying and fixing of Tube light fittings including all cost and conveyance to work site etc complete SD 89

Supplying and fixing of Street light fittings including all cost and conveyance to work site etc complete SD94

Supplying and fixing of Ceilling Fan fittings including all cost and conveyance to work site etc complete SD 107

SUB ESTIMATE-Compound Wall

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting up to 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casuarinas props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.

Plane surface

Column Centering

RCC 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcemeat and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with Kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats of Exterior Emulsion over priming coat including cost and conveyance of all materials and labor charges etc complete.

SUB ESTIMATE-Water supply arrangements

Supply and dellivery of 1000 lit HDPE Tank

Supply and delivery of Pvc pipe etc complete

63mm pvc pipe

50mm pvc pipe 6ksc

Laying jointing of 63mm 4KSC Pvc pipe etc complete

63mm pvc pipe

Supply and delivery Pvc specials etc complete

63mm PVC Tee

63mm PVC Elbow

63mm PVC Bend

50mm PVC Tee

50mm PVC Elbow

50mm PVC Bend

63mm PVC Ball valve

50mm PVC Ball valve

Supply and delivery of 2.0 HP 15LPM X40M clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes.

2HP Motor

SUB ESTIMATE- Sanitary Arrangements

Septic tank

Supply and delivery of Indian Water Closet

Supply and delivery of Europeon Water Closet

Supply and delivery 110mm PVC Pipe and specials

110mm PVC Pipe

110mm PVC Bend

110mm PVC Tee

110mm PVC Elbow

SUB ESTIMATE-Electrical details for Community Hall

Wiring with 2 x 1.5 Sq.mm PVC unheated SC allocable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable color for Concealed PVC light point / Fan Point SD 25

Light point

Fan point

Wiring with 2 x 2.5 Sq.mm PVC unheated SC allocable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - interlocking C.S. Plug top with painting of suitable color for concealed PVC plug point.- SD -38.

Plug point. SD 38

Supplyand fixingof 1200mm(48") sweep AC ceiling fan complete with steppedelectronic300Wregulatorwith1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 106

Supplying and fixing of Tube light fittings including all cost and conveyance to work site etc complete SD 89

Supplying and fixing of CFL including all cost and conveyance to work site etc complete

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb SD 83

Inter connection with 7/20 PVC insulated copper wire

25mm GI Service pipe

63A 4P MCB switch

Wooden board (0.60x0.60)

63mm Fuse Carrier

EB Deposit

SUB ESTIMATE-Rain water Harvesting

Supply and Delivery 110 mm pvc pipe

110mm PVC Pipe

110mm PVC Elbow

Soak pit Arrangements

Provision for Kitchen Equipment and Dinning Furniture

Elevation work

Tactile flooring and Brailtte sign board

Provision for Name Board

Provision for Photo graphic charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

VETRI CONSTRUCTIO (BID ID -1456050)

MERITON CONSTRUCTION (BID ID -1450992)