PROVN OF TRG SHED AND ALLIED INFRA AT SCHOOL OF ARTY UNDER THE AOR OF GE DEOLALI

Amount

Surface Excavation nexc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in soft/loose soil all as directed.

Ditto all as per Item No 2 above but depth exc 1.50m and n.exc 3.0m in hard dense soil all as specified and directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.

Removing excavated material upto a distance n, exc 50m and depositing where directed at a level n exc 1.5m from the base.

M&L for hardcore of broken or boulders of guage n exc 63 mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed.

M&L for PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation filling and concrete etc complete all as specified and directed.

M&L for RCC (1:1.5;3))using 20 mm graded stone aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M & L for providing reinforced cement concrete (1:1.5;3), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed.

M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Ditto all as per item No. 14 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M&L for Plates (plain or chequered)channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe 410W (gde-E-250) quality A,

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weldedt tubes conforming to I. S.1161-1979 grade St.-240

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long

S & F Pre-painted galvalume aluminum zinc coating GI based MANGLORE PATTERN corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

M&L for fly ash brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as directed.

M&L for fly ash brick sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified and directed.

M&L for 15mm thick Plastering in cm 1:6 on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of putty 1- 2mm th putty ,sanding the surfaces till smooth finish is obtained and finally applying two coats of royal plastic emulsion paintetc complete all as directed.

Preparation of new surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (APEX SUPREMA) / Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL) .

M & L for preparation of new steel surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer red oxide zinc chrome etc complete all as directed.

M&L Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) 75mm thick as in subbase complete all as directed.

M & L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) , laid in slope of 1:20 and alternate bays incl finished even and smooth without using extra cement and joints in the plinth protection etc complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square meter of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for anti-termite treatment the top surface of filled earth at the rate of 5 lit of emultion per sqm of surface area.

M&L for anti-termite treatment the soil under plinth protection at the at the rate of 5 lit of emultion per sqm of surface area.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed following:-

One light/Fan point controlled by one switch.

One 5 pin, 6 A socket outlet on the same board

One 5 pin, 6 A socket outlet on the independent board.

All as per item No. 34 here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 2.5 sqmm size cable as earth continuity conductor for one 15 Amps socket outlet independent -ditto-

S&F switch piano flush type 5 Amp SP one way ISI marked complete all as specified.

S&F socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified.

S&F switch piano flush type 15 Amp SP one way ISI marked complete all as specified.

S&F socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.

S & F electronic fan regulator 5 step ISI marked connecting complete all as specified.

S&F for ceiling rose surface bakeletile.

Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. Note: Ceiling Fan must operated on electronic Regulator, it should not be remote operated.

S&F ceiling mounted 2x2 LED luminaire Pluto neo panel with glare free soft light 34 Watt complete pre-wired all as specified and directed.

Supply and fixing LED tube lights fitting, 4 feet long 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix exhaust fan, Plastic body 230mm sweep, with all accessories including frame work in ply wood/ metal in existing window and electric connection all as specified and as directed. Havells Ventil Air - DB NEO/ Eqvt from CG/ Bajaj.

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

S&F in replacement MCCB 125 Amps, 16 KA , 4P, complete.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

S&F MCB SPN 40 Amp "C " curve

S&F MCB SP 6 to 32 Amp "C" curve.

S & F in repair Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conductor cable of 6 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.

M&L Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

Supply and fixing building LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and lay cable XLPE insulated Heavy duty screanedPVC bedded, galvanized steelstrip or wire armoured, electric power cable 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core.

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Supply & lay in trenches double walled corugated HDPE pipe 75 mm dia high density for protection of under ground cables( Note: pipe couplers with seal, bends, end covers etc are deemed to be included in rate quoted)

S&F in repair 'Tubes "light grade" galvanised iron, laid under roads/drain, fixed to poles, walls, with flat iron clamps bolts/nuts/washers of the following sizes of 50 mm diabore complete all as specified and directed.

Note: Amount of sch of credit of Rs.NIL/-will be deducted from total amount of BOQ.

M/S YOGESH CONSTRUCTION

sunway associates

shubham Enterprises

Vishal Constructions

VS CONSTRUCTION

Jay Kusalkar Enterprises