8231 REPAIRS TO JOINERIES, FLOORING, CEILING, SANITARY / PLUMBING FITTINGS, ETC IN CERTAIN BLDGS IN THE AREA OF AGE B/R-II UNDER GE (CENTRAL) PUNE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete including removing rubbish off the premises complete all as directed.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing unserviceable tiles all as directed and rubbish off the premises complete.

Taking down / dismantling Wall panelling and similar work at any description and any position complete all as directed and removing u/s materials off the premieses all as directed.

Dismantling of boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions, false ceiling and wall lining etc and similar position fixed with screws complete and removing u/s materials off the premises complete all as directed.

Dismantling aluminium section any description complete all as specified and directed.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area n.exc 1.50 Sqm each all as specified.

All as per item No 6 here-in-before but area exc 1.50 Sqm and n-exc 4 Sqm each al as specified.

Taking down shutters only area exc,1 Sqm but not exc, 2 Sqm each all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq. m each complete as directed

All as per item No 9 here-in-before exc 1.5 and n exc 4 Sqm each

Taking down Shutters of any description n exc 1 sq. m each and refixing in the same opening after carrying out necessary adjusting / minor repairs etc as directed

All as per item No 11 here-in-before but exc 1 Sqm and n exc 2 Sqm each

Supply and fixing factory made plain framed panelled shutters (two panel ) 35mm thick 2nd class hardwood with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 103 ( Part -I) kiln seasoned and chemically pressure treated. complete fixed to chowkats all as specified and directed

S&F 30mm thick flush shutters, solid core onstruction, with particle board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg and as directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in drg and as directed.

S&F aluminium anodised butt hinges 100mm, medium weight complete all as specified and directed.

S & F Aluminium anodised powder coated barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F 150 mm long extruded aluminium alloy powder coated handles, fabricated type complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mortice lock vertical type 100mm brass four lever complete all as specified and directed.

Supply & fix aluminium alloy anodised sliding door bolts with hasp and stapple (bolt type) and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long all as specified and directed.

Supply and fix in repair 300 mm long ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

S & F in repair aluminium anodised powder coated curtain rails 25mm dia with SS brakcet, knobs, rings @ 10cm c/c etc complete all as specified and directed.

Supply and fixing stainless steel wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm all as specified and directed.

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F aluminium anodised powder coated door shutters (single / double leaf) or partitions, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F aluminium anodised powder coated window and ventilator shutters in three track sliding with two or more shutters with sliding arrangement rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/M etc complete all as specified and directed

S&F aluminium anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling inner core of frame with PCC (1:3:6) type C1 using 20 mm graded aggreate complete, as specified and directed.

All as per item No 34 here-in-before but size of frame 105x60 mm.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc complete all as specified and directed.

M&L for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawings complete all as specified and directed.

M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling on and including aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, and applying two coats of acrylic distemper over a coat of primer complete all as specified and directed.

M&L for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish with and including aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm complete all as specified and as directed

S&F 18/19 mm thick, prelaminated PVC moulded solid shelves and drawers fitted under cooking platform and other platforms all as specxified and directed

M&L for 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing to wall to make PVC frame as per specification and drawings complete all as specified and directed.

S&F in repairs prelaminated particle board, 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white in shelves/partition/shutters etc complete all as specified and directed.

S&F continuous piano hinges 30mm flap mild steel bright finish all as specified and directed

M&L for 100mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate complete all as specified and directed.

M&L for 50mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete all as specified and directed.

All as per item No 45 here-in-before but 25 mm thick type B0 using 12.5 mm graded aggreate.

M & L for Vitrified ceramic tiles light shade 10 mm thick (square /rectangular ) polished , area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

All as per item No 47 here-in-before but in skirting / vertical surfaces over and including 15 mm thick baking coat of CM 1:3 in complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

All as per item NO 49 here-in-before but area of each tile exc 0.11 sqm and n exc 0.18 sqm.

M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:3 complete all as specified and directed.

M&L for 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms or similar places and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

M&L for 20 to 25mm thick machine cut Kota stone (550 x 550 mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing upto entire satisfaction of Engineer-in-Charge complete all as specified over and including 15mm thick screed bed in CM 1:6 complete

All as per item No 54 here-in-before but in skirting over and including 15 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for rubber moulded glossy finish machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 grade fixed with grey cement and no pigment over and including 25 mm thick sand cushioning complete all as specified and directed.

M&L for rubber moulded glossy chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work in CM 1:6 including taking down old plastering and removing rubbish off the premises complete all as specified and directed.

M&L for preparation of newly plastered surface wall and applying two coats of oil bound distemper over a coat of primer of same make over 2 mm thick wall care putty, to obtain the true line to achieve smooth surface complete all as specified and directed

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer of same make over 2 mm thick putty, to obtain the true line to achieve smooth surface complete all as specified and directed

M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer over 10 cm width of girth complete all as specified.

Supply and fix 3mm thick fibre glass in glazing fixed to frame with suitable expoxy adhesive and atleast 06 Nos MS glazing clips per window panes fixed with steel window frames all as specified and directed.

Supply and fix in repair 3mm thick fibre glass in glazing fixed to frame with suitable expoxy adhesive and atleast 06 Nos MS glazing clips per window pane fixed with steel window frames all as specified and directed.

Supply and hoist in position rotational moulded polythylene water storage tanks of 500 litres capacity double layered (cylindrical vertical with closed top) including taking down old u/s PVC tank complete all as specified and directed.

All as per item No 66 here-in-before but 1000 litre capacity.

Cleaning of PVC / RCC OH water tank upto 1000 litres capacity manually by emptying and complete removal of all silt / mud / deposition etc and treating with bleaching powder and check for blokage free water flow complete upto satisfaction of Engineer-in-charge all as directed.

Supply and fix in repair PVC OH tank cover of same colour made of best quality PVC and fixed in position at any height secured tightly with tank complete all as specified and directed.

M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade concealed all as directed including taking down old water tubing complete all as specified and directed.

All as per item No 70 here-in-before but 20 mm bore but in surface.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, bedding with and including making good to floor, complete all as specified and directed.

S&F in repair vitreous china pedestal pattern, water closet white including cast iron 'P' or 'S' trap and connection to trap includintg seat cover and jet spray and making good to floor, complete all as specified and directed.

S&F in repair vitreous china flat back type wash basin, white of size 550 x 400 mm including brackets ,32 mm bore chromium plated waste coupling 15 mm dia 450 mm long PVC connection pipe and PVC waste pipe 32 mm bore complete all as specified and directed.

Supply and fix in repair vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair vitreous china urinal partition white of size 310x770 mm complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fix in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Stainless steel plate rack of size not less than 900 x 900 mm complete all as specified and directed.

Supply and fix in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib cock fancy type complete all as specified and directed.

S&F in repair 15mm bore chromium plated angle cock fancy type complete all as specified and directed.

S&F in repair 15mm bore chromium plated concealed stop cock fancy type complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F in repair 15mm bore chromium plated pillar cock fancy type complete all as specified and directed.

S&F in repair PVC connection 15 mm dia 450 mm long complete all as specified and directed.

L.T Associate