Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
4 Feb 2025, 6:51 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bengaluru Water Supply And Sewerage Board
PALLAVI N
WORK OF SUPPLY ERECTION AND COMMISSIOING OF 100HP HSC PUMPSET AND ALLIED WORKS AT LLR PUMPHOUSE COMING UNDER AEEDEPS2 SUBDIVISION
BWSSB/2024-25/EL/WORK_INDENT2056
BWSSB/2024-25/EL/WORK_INDENT2056
Open
Electrical
Two Tender Document System(Two Cover)
BWSSB Executive Engineer Design Electrical and Pumping Station
7 documents required · 7 mandatory
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
achieved in at least two financial years a minimuM financial turnover (in all classes of electrical engineering construction works only) of RS 92,71,991/-(usually not less than the estimated cost
satisfactorily completed as prime contractor, at least one similar nature of work consisting of following specification.1.Work of supply, installation and commissioning of 100HP and above HSC pump set and its allied works.2.Work of Supply, installation and commissioning of 100HP soft starter.
satisfactorily completed as prime contractor, at least one similar nature of work which is of value not less than RS 46,35,996 in a single work (at least 50% of the estimated cost)
AATC
Liquid assets or availability of credit facilities of no less than RS 27,91,600/- mandatory. ( credit line/letter of credit/ certificate from banks for meeting the fund requirement etc).
Contractors should have a valid Electrical contractor license issued by the Electrical inspectorate (KSEI)/any other authorized departments.
Two years warranty certificate to be uploaded in tender for the pumpset from the pump manufacturer to your firm mandatory
form of tender
₹1,970
₹1.6 L
20 Jan 2025
20 Jan 2025
5 Feb 2025
3 Feb 2025
WORK OF SUPPLY ERECTION AND COMMISSIOING OF 100HP HSC PUMPSET AND ALLIED WORKS AT LLR PUMPHOUSE COMING UNDER AEEDEPS2 SUBDIVISION
Labor charges for dismantling the Existing pumpsets, base frame and suction delivery pipeline, disconnect the power cable. The same removed / scrapped pumpsets shifted to the stores as directed by En...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supply of brand new horizontally spilt case horizontal mounting type centrifugal pump with bronze impeller & capable of pumping filtered water contain 1 PPM suitable for coupling to motor on a common ...
Supply of 1480Rpm,75KW/ 100HP, duty -S1, Induction motor horizontally mounting type screen protected drip proof with class B insulation for continuous duty squirrel cage induction motor capable to dri...
Accessories like Base Frame , Coupling, Foundation bolts, Pressure guages both on delivery and suction side of pump for each pump and other accessories etc -for 100HP pump at LLR
Labor charges for erection & commissioning of pumpset, includes fix the Base frame, coupling for the pump motor on the base frame with tightening of coupling, bolts nuts and other accessories, alignm...
Manufacturing, providing, transporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-73...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supply and fixing of ductile iron double flanged swing check vavles with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nickel o...
Providing Ductile Iron Push on special confirming to IS 9523:2000 - All
DI PN :16.0 Dismanting Joints :
Supplying,and fixing of DI body Foot Valve with brass strainer with necessary flanges, nuts and bolts etc., complete on to the suction line.300mm.
Providing, fabricaing, supplying and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumabl...
Providing, fabricaing, supplying and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumabl...
Fabricating supplying and mounting MS box made out of 14 SWG suitable for floor/wall mounting fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat with bolts, washers etc,. And painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6...
Supplying 400 Amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat sinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulated which a...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring. I Group A materi...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring. I Group A materi...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.200 A
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947150 As-
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting
Supply and fixing miniature circuit breakers on existing MCB distribution board using necessary fixing materials and 'C' type curve, indicator ON/OFF energy cross-3 with short circuit breaking capacit...
Supplying and fixing wiring 50/5 to 400/5 amps 5VA Burden current transformer class 0.5 accuracy
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947.
Supplying and fixing HRC fuse units base on existing switch /
panel board. 100 to 300 A
Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703 Above 63 A to 200 A
Supplying, fixing and wiring earth leakage relay with core balanced current transformed suitable for single phase 50HZ AC with latest micro controller based / digital readout of precentage leakage cur...
Supply and fixing of Multifunctional three phase monitoring relays suitable to monitor three phase mains. It monitors all phase parameters such as over/undervoltage, phase unbalance, phase failure as ...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.
Supplying, fixing and wiring 3 Digit Digital Ammeter/ Voltmeter
Supplying and fixing one of 230 volts bell or buzzer and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. -
Supply of 100HP copper reactor coil for the above said starter panel - (Approved Data rate)
Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any120 to 240 Sqmm (3.5/4 Core)
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 600 x 50 mm
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-
1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT Cable120 to 240 Sqmm.
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable.3.5 x 150/185 Sqmm.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
LLR 100HP_UPLOAD.pdf
Tender Document • 0.67 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .