AGE I CGN 23 2021 22 Misc repair work of B R nature of Md Accn and OTM bldgs at sec 23 and Repair to B R nature works like floor and wall tiling joinery cement plastering etc at Sector 24 and 62 CG Noida

Amount

Demolition cement concrete in ground floors and paving n exc 15 cm thick incl removing the demolished material out of MOD land complete all as specified.

Dismantling floor hearth or wall tiling including cment mortar bedding (incl backing), incl removing the demolished material out of MOD land complete all as specified.

Dismantling wall and ceiling or insulation boards incl brackets and cover fillets

Demolition cement concrete (reinforced) on any description and in postion nexc 15 cm thickness below or above ground level incl removing the demolished material out of MOD land complete all as specified.

Demolition of brickwork built in cement mortar.

Taking down plastering of brick or concrete wall surfaces in cement mortar complete incl removing the demolished material out of MOD land complete all as specified.

Taking up or down 20 mm bore any kind of tubing and connections

Taking up or down 25/32 mm bore any kind of tubing and connections

M&L for brickwork with modular fly ash bricks in CM 1:6, straigth or curved on plan exc 6m mean radius complete all as specified.

M&L for 25mm thick plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floors complete.

M&L for 10mm thick rendering for backing of tiles in CM 1:3 on fair faces of brick work or concrete surfaces.

M&L for 15mm thick Screed bed or beeding layer of mortar in CM 1:6 for laying floor finishes complete.

M&L for 20mm thick Screed bed or beeding layer of mortar in CM 1:6 for laying floor finishes complete.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement complete.

M&L for rendering 5 mm thick cement plaster in CM 1:3 on ceiling surfaces including finished even and smooth without using extra cement.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface with WPC and finished even and smooth without using extra cement complete.

Supply liquid water proofing compound (Make : Fosroc Conplast/Nitoband SBR / Dr Fixit LW+)

M&L for RCC nominal mix Type B0, 1:2:4 (12.5mm graded aggregate) in shelves

S&F for TMT bar 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ands and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

Formwork to soffits of flat suspended slabs, shelves and similar work not exe 200mm thick for fair finished surfaces

M&L for 20mm thick granite work (table rubbed and polished) in steps, jambs, pillars window cills and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust and jointed with Granite epoxy/silicone glue complete.

Rounding to edges of stone slabe one edge, such as steps, cooking platform and other similar situations and rubbing and polishing complete

M&L for non skid joint free coloured ceramic/rectified tiles 7 to 8mm this area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile complete all as specified.

M&L for Vitrified ceramic tiles light shade, 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile complete all as specified.

M&L for Glazed coloured ceramic digital tiles 450x350 or 300x 600mm, 10mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles in designer concept with highlighter as directed by Engr-in-Charge.

S&F for anodisied aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specified.

S&F Hangers 6mm dia GI (upto 1200m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified.

S&F 10mm thick multiwall (1 cell/2 wall) sandwich PVC sheet cut to shape and fixed in aluminium snap grid false ceiling complete.

Taking down Chowkhats or frames exc 1.5 sqm but n.exc 4 sqm with shutters (Without taking off shutters from the frame)

Taking down Chowkhats or frames n exc 1.5 sqm each with shutters (Without taking off shutters from the frame)

Refixing of shutters of any description exc 1 sqm but n.exc 2 sqm in same opening including taking down easing, and adjusting complete.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each

Taking down shutters of any description n. exc 1 sqm

M&L for 1st class hardwood plain, solid, straight chowkats or frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete

S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. The rates include for one shop coat of priming.

S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. The rates include for one shop coat of priming.

S&F 2nd class hard wood 35mm thick factory made panelled shutter with lock rail and panel of 9mm BWP commericial ply or 12mm veneered particle board with commericial veneering on both faces. The size of rail and stile as per IS 1003 (Part I), kiln seasoned and chemicall pressure treated complete.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc

S&F 30mm thick 2nd class glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc

S&F 25mm thick flush shutters, solid core construction, with particle board core and plywood face panels one face, commerical type on both sides complete.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. The rates include for painting with one shop coat of zinc chromate primer.

S&F steel ventilator with top hung shutter includig hinges steel peg stay, complete. The rates include for painting with one shop coat of zinc chromate primer.

M&L framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike; framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0.

S & F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles not exceeding 200 cu cm each

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.(Make:-RAJHSRI)

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

S&F 18/19mm thick prelaminated particle board, interior grade prelaminated both sides with decorative choic laminations fixed with screws to timber frame work complete.

M&L PCC(1:3:6) type C1 as in bed blocks for hold fast including necesssary formwork complete.

S & F mild steel flat iron as in hold fast clamps articles conforming to FE 410-O or FE 310-O

S&F 200mm long mild steel tee hinges, stove enamelled black, medium type and welded to frame and fixed to door complete.

S&F Aluminium butt hinges, size 75 mm fixed to PVC door complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 75mm size complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 50mm size complete all as specified and directed.

S&F mild steel sliding door bolts,300 mm long plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts,four on bolt plate and two on staple.

S&F in mild steel pressed handles, 150mm long, ovel type, stove enamelled black.

S&F mild steel barrel 200mm long tower bolts, stove enamelled black with bright bolt fixed to wooden door complete.

S&F mild steel barrel 150mm long tower bolts, stove enamelled black with bright bolt fixed to wooden door complete.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed to PVC door complete.

S&F 150mm long aluminium anodised handles, extruded aluminium alloy fabricated type and fixed to PVC door complete

S&F 3.0mm thick sheet glass, ordinary quality and glazing oil putty in steel windows or with beads fixed with metal pins in wooden windows in square n.exc 0.5 sqm in each pane complete.

S&F 3.0 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete

S&F CPVC pipe SDR-11, 20 mm bore with plain SDR-11 fittings complete to walls and ceilings or laid floors or concealed,( cost for cutting chases in wall/ceiling for concealing tube shall be measured seperately) complete all as specified and directed.

S&F CPVC pipe SDR-11, 25 mm bore with plain SDR-11 fittings complete to walls and ceilings or laid floors or concealed,( cost for cutting chases in wall/ceiling for concealing tube shall be measured seperately) complete all as specified and directed.

Cutting chases, pinning in, making good to facings in brick wallswhere required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades shelves lintels etc and cutting chases for concealed waer tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete

M&L for preparation of new untreated steel surfaces of any description over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer complete.

M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete

M&L for preparation of old wooden painted surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete.

M&L for preparation of new wooden small articles such as rafter feet, brackets or projection and locks labels etc n.exc 0.1 Sqm each and applying two coat of Synthetic enamel paint over a coat of pink primer complete

M & L for Preparation of new plastered surface and one coat of JK wall putty, on plastered surfaces,preparatory to distempering and applying two coats of oil bound distemper on wall.

M&L preparing new ceiling surfaces and applying two coat of white wash complete

M&L for Preparing of new plasterd surface and applying two coat of exterior emulsion paint (Make : Weather coat of Berger / Apex ultima of Asian paints) after over and incl a coat of wall primer as approved by manufacturer complete.

Preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of distemper oil emulsion including necessary minor repair of wall by birla white putty complete all as directed by Engineer in Charge

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M & L for Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275.

M & L for (fe-410W) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

M&L for fountain pool coloured (Make Italia or Glasika to match existing tile colour & pattern) Glass mosiac tile fixed over 2 to 3mm Nitotile GPX Polymer modified adhesive laid with 2 mm spacers and filling joints with Nitotile Grout pressed with rubber trowel to remove excess grout with damp spongs and subsequently with dry rag complete.

S&F in repair for precast cement concrete type B1, 1:2:4 (20mm graded aggregate) Kerb stones jointed in cement mortar 1:6 and stuck flush complete.

Sanjay Associates

M/S R.S. Builders

R S CONSTRUCTION CO.