S/R to Boria to Gurjimunda via Bahadurpadar for the year 25-26

Clearing grass and removal of rubbish from berms and disposing off upto a distance of 50m outside the peiphery of the area asper direction of Engineer in charge.

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and / or compressed air to receive bituminous treatment.including cost of all labour and T&P required for the work etc. complete as per direction of Engineer in charge.

Labour for scraping cleaning the road surface applying tack coat using 3.0kg of bitumen for 10 Sqm and laying 37.5 mm thick built up spray grouting in one layer 0.45 cum of 25mm to 40mm size hard granite metal and 12.00 Kg penetration grade of bitumen for 10 Sqm in each layer with 0.12 cum of 12 mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries but excluding cost and conveyance of bitumen, metal and chips complete as per specfication and direction of Engineer-in-charge.

Providing laying spreading and compacting stone aggregates of sizes to waterbound macadam specification including spreading in uniform thickness hand packing rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber applying requisite type of screening materials to fill up the interstices watering and compacting to required density etc complete

Providing and applying primer coat including cost of primer

Providing and applying tack coat with Emulsion (RS-1) @ 2.00kg/10 sqm by manual means including cost,conveyance & taxes of emulsion ,cost of all labour & T&P requried for the work etc. complete as per specification and direction of Engineer-in-charge.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen transporting to the hot mix to work site laying with a hydrostatic paver finisher with sensor control to required grade level and alignment rolling with smooth wheeled vibratory and tendum roller to acheive the desired compaction asper Clause 508 of MoSRT & H specifications for Road & Bridge works (4th revision) including cost conveyance of all materials, cost of all labour and T&P required for the work etc. complete as per direction of Engineer in charge.

Providing laying and spreading moorum on the road surface to required thickness and dressing including cost, carriage charges and royalty of moorum with cost of all labour,T&P required for the work etc. complete for finished item of work as per direction of Engineer in charge.

Construction of embankment with approved materials obtained from borrow pits with all lifts and leads,transporting to site by mechanical means within a lead of 5 kms,spreading and grading to required slope and compacting meet requirement of table 300-2 & clause 305 of MoSRT&H specifications 94th revision)cification and direction of Engineer in charge.

Construction of R.C.C guard post of 200mm dia M-15 grade cast -in -situ with 20mm nominal size aggregate ,true on line and grade, tolorance of vertical R.C.C post not to exceed 1:500 as per drawing and technical specification clause 1700

Please Enable Macros to View BoQ information