CA NO GE/AFJ-36/2023-24 REPAIR RECANNING AND POLISHING AND PAINTING TO DIFFERENT WOODEN AND STEEL CHAIRS AT AFS JAMMU UNDER GE (AF) JAMMU

Amount

CHAIR DINING (FD-203/279)

Replacement of u/s Rear Legs of chair dininng with new rear legs of seansoned hard wood free from cracks and knots, shape and size as shown on drawings

Descrption all as per ser item No 1.01 above but Front Legs

Descrption all as per ser item No 1.01 above butSide rail with holes for weaving (spacing of holes shall be as per old one)

Descrption all as per ser item No 1.01 above but Front/back rail with holes for weaving (spacing of holes shall be as per old one)

Descrption all as per ser item No 1.01 above but Bottom stiffener

Descrption all as per ser item No 1.01 above but Back stiffener

Provn of four Nos of wooden tringular bracket of size 75mm x 75mm to each chair made out 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PVC/Rubber Shoe as per sample approved

Re-canning of Chair dining as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge.

CHAIR DINING MAP (FD/MAP-II/05)

Replacement of u/s Rear Legs of chair dininng with new rear legs of seansoned hard wood free from cracks and knots, shape and size as shown on drawings

Descrption all as per ser item No 2.01 above but Front Legs

Descrption all as per ser item No 2.01 above but Bottom stiffener

Descrption all as per ser item No 2(a) above but Back stiffener

PVC/Rubber Shoe as per sample approved

Replacement of u/s PVC Seat with new PVC seat 4mm thick of PPCP material and weight not less than 0.50 kg with perforated holes shall be fixed in side the frame of seat with proper screws , PVC sheet of superior quality as shown in drawing and directed by Engineer-in-charge.

CHAIR WRITING (FD-261/280)

Replacement of u/s Rear Legs of chair writing with new rear legs of seansoned hard wood free from cracks and knots, shape and size as shown on drawings

Descrption all as per ser item No 3.01 above but Front Legs

Side rail with holes for weaving (spacing of holes shall be as per old one)

Front/back rail with holes for weaving (spacing of holes shall be as per old one)

Descrption all as per ser item No 3.01 above but Bottom stiffener

Descrption all as per ser item No 3,01 above but Back stiffener

Descrption all as per ser item No 3.01 above but Arm rest

Provn of four Nos of wooden tringular bracket of size 75mm x 75mm to each chair made out 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PVC/Rubber Shoe as per sample approved

Re-canning of Chair Writing as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge.

CHAIR EASY(FD-229) -

Replacement of u/s Rear Legs of chair easy with new rear legs of seansoned hard wood free from cracks and knots, shape and size as shown on drawings

Descrption all as per ser item No 4.01 above but Front Leg

Side Rail

Front/Back Rail

Descrption all as per ser item No 4.01 above but Back Stiffener

Descrption all as per ser item No 4.01 above but Bottom Stiffner

Descrption all as per ser item No 4.01 above but Arms rest

PVC/Rubber Shoe as per sample approved

Re-canning of Chair easy as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge.

CHAIR SOFA SET (FD-281/373)

Foam cushion for sofa set size 525x525x100mm, 40 density, Make-Sleepwell duly covered with best quality tapestry cloth as approved by Engineer-in-Charge complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 150/- per RM

CHAIR COMPUTER (FD/E6/MAP/01)

Replacement of complete seat with new moulded foam cushioned 40mm density as shape and size covered with tapestry cloth as approved along with PVC liping all round, complete all as specified

All as per item No 6.01 here-in-before but for back frame

Replacement of Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Replacement of Pedestal assembly complete

Replacement of Twin wheels coasters (set of five) press fitted at the bottom of leg.

CHAIR CB STEEL WITH ARMS/WITHOUT ARMS ( FD-75(M) )

Seat frame of Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish incl weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality fixed as shown in drawing

All as per item No 7.01 here-in-before but back frame

All as per item No 7.01 here-in-before but Seat frame for Chair CB Steel without Arms

All as per item No 7.03 here-in-before but back frame

Arms rest for Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish

PVC cap at top of the frame of the chair (02 Nos to each chair)

PVC Shoe at bottom of the frame of the Chairs (04 Nos to each chair)

CHAIR WRITING MAP (FD/E6/MAP/12)

Replacement of exising tapestry of seat frame with new tapestry cloth of seat frame approved by Engr-in-charge with PVC liping all round complete all as specified and directed by Engr -in charge Note- Cost of tapestry not less than Rs 200/ RM.

All as per item No 8.01 above but for back frame

Replacement of Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Replacement of complete seat and back with new moulded foam cushioned 40mm density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, complete all as specified

Rubber stopper at the bottom of leg.

Chair Verandah (FD-256, 259, 359)

Taking out old U/S cane/newar and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge

PVC/Rubber shoes as per sample approved

Chair Verandah MAP(FD/MAP-II/06)

Taking out old U/S PVC seat and back and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and replace PVC seat and back with 4 mm thick of weight not less that 1.85 Kgs and PVC ribs on seat and back of superior quality as directed by Engineer-in-Charge

PVC/Rubber shoes as per sample approved

CHAIR executive long back lethaerate

Replacement of complete seat with new moulded foam cushioned 40mm density as shape and size covered with letherate as approved along with PVC liping all round, complete all as specified

All as per item No 11.01 here-in-before but for back frame

Replacement of Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Replacement of Pedestal assembly complete with hyradlic shocker as directed by Engr-in-charge

Replacement of Twin wheel coasters press fitted at the bottom of leg.

TABLE DRESSING GENTS(FD-230/379)

Replacement of Looking glass complete with frame and back ply. Make- Saint Gobin/ Gold Plus

PEG TABLE (FD-236/277/384)

Replacement of u/s Legs of Peg Table with new legs of seansoned hard wood free from cracks and knots, shape and size as shown on drawingsLegs

Description all as per ser item No 13.01 above but Long rail

Description all as per ser item No 13.01 above but Short rail

Description all as per ser item No 13.01 above but Side stiffener

Replacement of Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

PVC/Rubber Shoe as per sample approved

TABLE 900mm x 600mm WITH DRAWER and WITHOUT DRAWER (FD-283/284)

Replacement of u/s Legs of Table 900mmx600mm with drawer and with out drawer with new legs of seansoned hard wood free from cracks and knots, shape and size as shown on drawingsLegs Legs

Description all as per ser item No 14.01 above but Long Rail

Description all as per ser item No 14.01 above but Short Rail

Description all as per ser item No 14.01 above but Bottom Side stiffener

Description all as per ser item No 14.01 above but Bottom Centre stiffener

Replacement of Drawer made out prelaminated MDF board and 6mm thick commercial ply at bottom and fitted with one 100mm chromium plated handle

Provn of six Nos of wooden tringular bracket of size 75mm x 75mm to each Table made out of 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

Replacement of Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

PVC/Rubber Shoe as per sample approved

TABLE CENTRE (FD-274/375)

Replacement of u/s Legs of Table Centre with new legs of seansoned hard wood free from cracks and knots, shape and size as shown on drawings

Description all as per ser item No 15 .01 above but Long rail

Description all as per ser item No 15 .01 above but Short rail

Description all as per ser item No 15.01 above but Side stiffener

Replacement of Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

PVC/Rubber Shoe as per sample approved

TABLE OFFICE OFFICER STEEL (FD-84(M)/1003)

Replacement of Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

Replacement of Drawer made of 22 gauge MS sheet with a coat of red oxide primer

Replacement of Six levers Lock of Godrej/Harrison with duplicate keys.

Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one.

PVC Shoe at bottom of the leg of the Table

TABLE DINNING FOR 8 PERSONSFD-376,FD-30 & FD-239: The following repairs shall be carried out to table Dining for 8 persons after removing old unserviceable parts:-

Supply and fixing of top of the table made out of particle board 18mm thick with 1mm prelaminated exterior grade with teak wood ebeading all-round duly polished. as per drawings. Make : Kitply, Greenply, Archidply

Supply and fixing of legs of seasoned teak wood of the table as per drawings.

Supply and fixing of long rails of seasoned teak wood of the table as per drawings.

Supply and fixing of side rails of seasoned teak wood of the table as per drawings

Supply and fixing of seasoned teak wood corner size 100x100mm to the table between legs and rail fixed with screw .

Painting of the steel furniture items with two coat of synthetic enamel paint (colour as approved and directed by Engineer-in-Charge) after preparation of surfaces with emery paper and applying putty as and where required.

Chair writing MAP(FD/E6/MAP/12)

Chair Verandah (FD-256, 259, 359 MAP-II/06)

TABLE OFFICE OFFICER STEEL (FD-84(M)/1003)

Chair CB steel with arms/ without arms ( FD-75(M) )

Polishing of Wooden Furniture Items : All wooden surfaces of the wooden furniture items wheather exposed to view or not when placed in position shall be polised with high gloss french polish to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required.

Chair Dining FD-228/270/279 MAP-II/05

Chair Writing FD/261/280

Chair Easy FD-229

Sofa Set 4 Seater (FD-281/373)

Sofa Set 5 Seater (FD-281/373/FD/MAP-II/02)

TABLE DINNING FOR 8 PERSONSFD-376,FD-30 & FD-239

TABLE CENTRE (FD-274/375)

TABLE 900mm x 600mm WITH DRAWER and WITHOUT DRAWER (FD-283/284)

PEG TABLE (FD-236/277/384)

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II (if applicable) of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

SIARA CONCTRUCTION CO