REPAIRS MAINT B AND R COMPLAINT NATURE WORKS AT MD ACCN OF 70 MAJ AND 598 ORS AND REPAIRS TO ROOF SHEETS FALSE CEILING JOINERY PLUMBING WORKS ETC UNDER AGE B AND R 1 OF GE CENTRAL BANGALORE

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD Land complete all as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

All as per item 4 here-in-above but exceeding 1.5Sqm but not exceeding 4 Sqm each

Taking down shutter of any description area exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening after cutting , easing and adjustmentas with old ll types of builders hardware complete all as directed.

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each and stacking at site where directed.

All as per item No 7 here-in-above but not exceeding 1 Sqm each -do-

Dismantling of AC Corrugated or semi corrugated sheet etc any thickness including ridges as in roof covering and stacking at site where directed and removal of debris to a outside MOD land and depositing where directed complete all as directed.

Dismantling boarding, any description, fixed in any position with nails and stacking at site where directed for Credit.

Dismantling of tile wooden battens as in tiles of any size including tiling fillets exe 15 cm spacing complete and stacking where directed.

Dismantling of timber scantlings 40 Sq cm and over in section in any position unframed work and stacking at site where directed complete.

Dismantling wall and ceiling board fibre, uplp insulation etc or insulation boards any thickness including cover fillets complete all as directed.

M & L for Hard core of broken hard stone or boulders of guage not exceeding 63 mm , deposited spread as subbase to inter locking tiles in layers n.exc 15cm thick , watered & well rammed to true surface complete all as specified and directed.

Supply only Integral Water proofing Compound (ISI Marked) of Make : CICO , Acco Proof , Impermo , Aqua flex as approved.

M&L Second class hard wood well seasoned wooden scantling clean sawn framed & fixed to walls with screws complete all as directed.

M&L for second class hardwood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed, complete all as specified & directed

All same as per item No.17 here -in - above but except wooden boarding - (Note : wooden boarding obtained from item No 10 here -in - above)

M&L for Second class hard wooden battens spaced at 30 cm centre to centre clean sawn cross sectional area exceeding 5 sqcm but not exc 15 sqcm complete all as directed.

S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness, complete as specified & as directed

S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats.

S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed..

S&F in repairs Pre-laminated particle board , Exterior grade 18/19 mm thick (ISI Marked) , pre-laminated both side with decorative choice lamination including 3 mm thick teak wooden beading alround as ordered complete all as specified.

S&F 19 mm thick MDF Board both side finished cut to size & fixed in wardrobes , number of compartments & drawers as ordred complete all as specified.

S & F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, window, ventilators and partitions (fixed portion) with extruded built up satndard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285 fixing with dash fasteners of required dia and size incl necessary filling up the gaps at junctions i.e at top, bottom and sides with rquired EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required incl cleat angle aluminium snap beading for glazing / panelling, CP brass/ stainless steel screws all complete as specified

S & F aluminium grill ( anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern,with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @ 200mm centre to centre, including cuttings the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standardsection around the opening, all complete as per requirement and direction of Engr-in-charge.

S&F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) fixed/sliding type window/ventilators, aluminium sections weighing not less than 0.55kg per metre, all are made of from aluminium anodised section including necessary, jointing cleat, glazing clips, rubber packing anodised aluminium snap beading, aluminium fittings such as peg stay 150mm long, hinges 100mm long, suitable handle, screws of suitable size locking arrangement, etc complete all as specified and directed

S & F powder coated aluminium door shutter aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rybber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S & F150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S & F in repair150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S & F in repair 100 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S&F100 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F in repair 100 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F in repair 150 mm size aluminium alloy handles (ISI Marked) cast type anodised and matt finish not less than Gd AC 10 of IS: 1868 :1986 fixed.

S&F in repair 100 mm size aluminium alloy handles (ISI Marked) cast type anodised and matt finish not less than Gd AC 10 of IS: 1868 :1986 fixed.

S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F in repair 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F in repair 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S & F 100mm in repairs aluminium anodised, hasp and staple, safty type, with hinge pin, including bolt to hinge plate and fixed with screws complete all as directed.

S&F in repair Mild steel powder coated body door stopper with hard drawn steel spring, 150mm size fixed to door all as directed.

S&F in repair mortice lock, 100mm size, brass, vertical type, 4 lever with minimum 2 keys all as directed.

S&F in repair magnetic catcher with 8 mm dia steel ball & brass body & stiking plate including letting in fixed complete all as directed.

S & F in repair 40mm dia brass cupboard knob, bright finished, fixed with nut, screw and washer complete of approved make and design as directed by Eng-in-charge.

S&F in repair 20mm dia aluminium anodised powder coated curtain rods/ towel / ward robe rod etc all as specified and directed.

S&F in repair aluminium anodised brackets powder coated for curtain/Towel/ Ward robe hanging rodall as specified and directed.

S&F in repair 25mm dia aluminium anodised decorative type curtain rods along with brackets & dome.

S&F in repair decorative type curtain rod with brackets & dome .

S & F in repair 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long be-tween flanges complete all as directed including taking down old towel rail.

S & F stainless steel self closing auto hinges for cabinets etc complete all as specified

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed.

M & L for running welding in repairs thickness of metal to be welded n exc 6mm

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified & directed

Supply and fix Pre- painted galvalume aluminum zinc coating GI plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction all as specified and as directed.

S & F for 4 mm thick of size 600x600mm HSPC (High pressure steam cured) pre-primetered self embossed, textured designer board E-Board Classic( White colour) to be fixed and including GI based frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450mm centre to centre/ intermediate channel 09mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with & incl ceiling section(n.exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre suspended with 6 mm dia GI barhangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purline from the roof with alignment clip including providing provision for light fixtures of any size complete all as specified.

M & L for 75 mm thick plain cement conctere 1: 3 : 6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection finished the surface fair and even complete all as directed.

M & L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in sub base of foot path and finished the surface complete all as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in floor and finished the surface suitable to receive floor tiles complete all as directed.

M & L non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

M & L non-skid coloured joint free ceramic tiles matt finish 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all directed and specified.

All same as per item No 61 here-in-above but tiles of size exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting but tiles laid over and including 10 mm thick screed bed in cement mortar 1:4 -do-

S&F vitrified ceramic tiles 10mm mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match with tiles laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

S&F vitrified tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match with tiles laid over and including 10 mm thick screed bed in cement mortar 1:4 complete all directed and specified.

M & L non-skid coloured joint free ceramic tiles matt finish 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all directed and specified.

All same as per item No 66 here-in-above but tiles of size exceeding 0.18 Sqm but not exceeding 0.36 Sqm as in skirting but tiles laid over and including 10 mm thick screed bed in cement mortar 1:4 -do-

M&L glazed ceramic designer tiles any shade or pattern as approved of size 350x250x7mm / 450x350x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item Nos 32 & 37 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).

M&L for factory made chequered cement concrete tiles, 40cm x 40cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment, over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified & as directed (Note for item Nos 61 to 69 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).

M&L for factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed (Note : Quoted rate is deemed to be inclusive of sand cushoning).

M & L for Rendering 15 mm thick in cement mortar 1:4 on internal concrete surface mixed with WPC @ the weight of minimum 3% by weight of cement mixed or as per manufacturer instruction , and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC measured and paid separately.

M & L rendering 15 mm thick CM 1:6 on stone masonry surfaces other than fair face of brick work or one sided lathing finished followed by 10mm thick settting coat in CM 1: 6 inclding finishing surface even and smooth without using extra cement in walls complete all as specified and directed by Enigineer in Charge

M&L for rendering 5mm thick in CM 1:3 on concrete surface as in ceiling,chajja,roof projection etc. finished the surface even and smooth without using extra cement complete all as specified.

Three coats of white wash on newly plastered surface of ceilings after necessary preparation of surface complete all as directed.

Preparation of newly plastered wall surface and & applying two coats of cement base paint over a coat of alkaline resistant primer complete all as directecd.

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1-2 mm thick white cement based wall care putty as ordered complete all as specified.

S&F sheet glass 5.5 mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.

One coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted wooden surface after necessary preparation of surface complete all as directed.

Taking down old 20 mm bore GI tubing and connection from Bldg from a height upto 7th floor after necessary disconnection & S&F new CPVC pipe SDR II having outer dia 20 mm pipe with plain CPVC SDR II fitting such as bends, elbows, unions and end pieces to receive the fittings and fixed with solvent cement in walls/ceilings (concealed/surface) or laying in floors in same or different locationas ordered making necessary connection & testing complete to thhe satisfaction of Engineer-in-charge complete all as specified

S&Fin repair health faucet ABS body with wall hook and 1.25 metre long SS braided rubber hose pipe and wall hook mounted type complete. Make: Prayag Cat No BEA-40 or equivalent in approved make.

Taking down bib tap, pillar cock, stop/angle cock, & shower rose etc for carrying out repair/ refixing the same in old position after cleaning, replacing washer, spindle and adjusting screws etc complete all as directed.

All as per item No 82 above/ here-in-before but for hot & cold mixing valves/taps.

S & F in repair PVC flush handle including connecting rod & shiphon washer suitable for 10 litre capacity PVC flushing cistern complete all as directed.

S & F in repair PVC syphon set complete suitable for 10 litre capacity PVC flushing cistern complete all as directed.

Replacing old unserviceable steel brackets for wash hand basin (Flat or angle back) including cutting for pinning in end of 12mm dia bolt erecting stand, inlet and outlet screwed for pipe or connection including necessary packing all as directed.

S&F in repair 15mm dia. fancy type chromium plated Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as directed.

S&F in repairs 15mm bore Stop valve, fancy type with long shank and cup of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified & as directed.

S & F in repair 2 way bib cock double handle with flange, cast copper alloy chromium plated, screwed down, suitable for 15mm bore iron pipe. Make: PRAYAG Cat No P6812 or equvelent of Make Hindware/Parryware/CERA

S&F in repairs brass chromium plated shower rose 125 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.Make : CERA Cat No F 7020304 or equivalent of Make Hindware/Parryware/Prayag

S & F in repairs brass, chromium plated, 15mm bore wall mixer for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8475 or equvelent of Make Hindware/Parryware/CERA

S & F in repairs towel racks/shelf stainless steel 600 mm long fixed complete all as directed.

S&F in repair sinks made of stainless steel ( gde 304) 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size (Approximate) 915mm x 460mmx203mm bowl size 405mm x 354mmx203mm (Make: Prayag Cat No 1322D or equivelent of Parryware /Hindware/Cera)

S & F 6mm thick looking mirror cut to required size and fixing to dressing table using timber fillets including taking off unserviceable mirror complete all as directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe with PVC connection pipe 15 mm dia 600 mm long etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified

S&F in repair bathroom mirror cabinet (PTMT) of size 430 x 330 mm fixed on wall with cadmium plated brass screws all as directed. Make :- Prayag (Cat Part No. 551) or equivalent of Commander (Jasmine) / Polytuf / Jindal / Parryware

Supply and fixing in repair 32mm dia waste fittings brass CP fixed to WHB complete all as spd and directed by Engg-in-Charge

All same as per item No 98 here-in-above but 40mm dia suitable for sink etc

S & F in repairs PVC connection pipe with PTMT nuts, 600mm long complete all as specified

S&F 32/40mm bore Low density polyyethylene (LDPE) pipes of pressure rating 6 kgf/Sqcm with connecting bracket fixed to waste coupling for basin/sinks complete all as specified and directed.

S&F in repairs brass chromium plated bottle traps suiable for 32mm bore of trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair 160 mm bore, UPVC (SWR), Type 'B', valley gutter pipe half round pipes in any length without ears, with rubber ring joints fixed to walls using MS holder of size as ordered complete all as specified and directed.

S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F in repairs 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repairs 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece single,(single Y) 110 mm dia equal or unequal with oval access door complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece single,(single Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece (double Y) 110 mm dia equal or unequal with oval access door complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece (double Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F in repair 75 mm size PVC (SWR) floor trap with grating including jonting the same with solvent cement complete all as directed.

S&F 550 mm X 400 mm size white flat back vitreous china wash hand basin including chromium plated pillar tap (Make: CERA Cat No. S1053101/S1053102 6502) cap stain head suitable for 15 mm bore of pipe , PVC connection 15 mm dia 45 cm long with chromium plated nuts and bolts and suitable washers, PVC waste 32 bore CP waste coupling chain and plug , porcelain stopper including CI bracket fixed in repair complete all as diirected.

S & F in repairs PVC seat cover for EWC white / Black colour complete with MS Hinged cromium plated make as per existing all as specified and as directed

S&F in repair steel chromium plated gratings, circular type, 125mm dia with or without waste hole fixed to existing traps with white cement complete all as directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag

S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as directed.Make of cistern CERA Cat No B1010109 or equivelant of PARRYWARE/HINDWARE/PRAYAG

&F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 750mm and 250mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 6.00 Kg. Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond

Disconnecting existing tanks, setting aside ( for lowering if required) for repairs, cleaning,etc and hoisting if required reconnecting and refixing in positing including cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes. ( Capacity exc 500 but n exc 1000ltrs)

All same as per item No 120 here-in-above but tank of size exc 250 lts but not exc 500 lts -do-

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 1000 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

S&F in repairs 20 mm ball valves, high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Removing complete shrubs/ vegetation upto root grown in any description such as grown in wall / beam / roof /chajja etc in height up to three storey building including filling the holes where the shurbs removed with cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) of minimum size 15cm x15cm x 15cm or as required and making good the distured surface as per its original specification to the satisfaction Engineer-in-charge& removal of the taken out shurbs out of MD land and disposed complete all as directed.

M AND V ENTERPRISES

AAKAAR INTERIOR & CIVIL CONTRACTOR

Kavitha Constructions

Harish Constructions

shri veerabadreshwara enterprises

PRACHANIVA CONSTRUCTIONS

SHREE BANASHANKARI ASSOCIATES

SRI MAHALAKSHMI CONSTRUCTIONS

Bidder Name

SHRI NARAYANADRI ENGINEERS & BUILDERS