Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.2 Cr
EMD Value
₹6.3 L
Closing Date
5 Jan 2024, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
Executive Engineer
Providing FHTCs to 4200 Households in Kannur habitation of Kannur village in Vijayapur Taluka in Vijayapur dist. covered under SVS
RWSSD/2023-24/WT/WORK_INDENT4919
RWSSD/2023-24/WT/WORK_INDENT4919
Open
Water /sewage treatment tanks
Two Tender Document System(Two Cover)
RWSSD Division Office Vijayapura
12 documents required · 12 mandatory
List of works for which tenders already submitted
Banker Details for reference
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Tenderer must have completed physical work done as prescribed in bid document format (Executed the following minimum quantities of works during any one year from last 5 years) Earth work excavation 6371cum, Pipeline (HDPE/DI/GI) For GI pipes above 15mm Dia will be considered 15306meters, Cement concrete 435cum, Steel10288kg, CONSTRUCTION OF ELSR/Sump 100Kl One no.
Mandating satisfactory Completion as prime contractor, for at least one similar nature of work such as Providing water supply scheme/Projects of value not less than 50% of amount put to tender i.e 209.31 Lakhsin one year during last five years. in the prescribed Format from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders.(Work indent number should be mentioned in work done certificate). Quantity wise detail to be furnished as per bid document
The Tenderer should possess valid registration of appropriate Class with PWD CLASS II and above.
Information on works for which tenders have been submitted and works which are yet to be completed as on the date of this Tender: (A) Existing commitments and on-going works-Tenderer must submit the statement regarding existing commitments and on-going works, In the format prescribed in KW document countersigned by the employer in charge not below the rank of Executive Engineer or equivalent.
Information on works for which tenders have been submitted and works which are yet to be completed as on the date of this Tender: (B) Works for which tenders already submitted. Tenderer must submit the statement Works for which tenders already submitted, in the format prescribed in KW document
Each tenderer should further demonstrate: Availability by owing at least 50 percent of the required / specified key and critical equipment for this work and the remaining 50 percent can be deployed on lease/ hire basis for all works provided, the relevant documents (commitment agreements etc.) for availability for this work are furnished. Requirement of specified key and critical equipments for this work as per bid documents
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2017-18 to 2021-22 Tenderer who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value . The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5-B) i.e., Rs 418.63 Lakhs
Turn over certificate and Profit loss account from Chartered Accountant for last five years. Achieved in at least Two financial years a minimum financial turnover (in all classes of civil engineering construction works only) achieved in at least two financial years Twice the amount put to tender financial turnover(usually not less than the estimated cost under this contract) (UDIN Number should be mentioned on Turn Over Certificate otherwise tender will be rejected. (Last year GST clearance & IT returns copies should be uploaded) i.e., Rs 837.26 Lakhs
The Tenderer should submit the Unconditional line of credit from Banker of a Nationalized Bank/Scheduled Bank/liquid assets amounting to 30% of amount put to tender i.e., of Rs 125.58 Lakhs.
PAN Card & GST Registration copy.
Accurate postal address, Principal place of address, Mobile Number and email address should be mentioned clearly.
A Self Declaration stating that all the information provided by me is true and correct. Executive Engineer RDW&S Division Vijayapur (employer) can cancel my tender and employer can also file a criminal case against me in the court if the employer found information provided by me is false or incorrect. I have gone through all the Tender conditions as well as site conditions and accepted them without any pre conditions.
₹5,000
₹6.3 L
27 Dec 2023
27 Dec 2023
8 Jan 2024
30 Dec 2023
30 Dec 2023
SUB ESTIMATE FOR DISTRIBUTION PIPE LINE WITH FHTC
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution light...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for Cutting in Cement concrete road surf...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
HDPE Electro Fusion COUPLER 63mm dia ---- Bidders are informed to go through all tender conditions
HDPE Electro Fusion TEE 63mm dia ---- Bidders are informed to go through all tender conditions
HDPE Electro Fusion ELBOW 63mm dia ---- Bidders are informed to go through all tender conditions
HDPE Electro Fusion REDUCER 75 X 63mm dia ---- Bidders are informed to go through all tender conditions
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supply and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The rantte/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Labour charges for attending to repairs to the PVC pipes by earth work excavation cutting the old pipe installation and jointing of new pipes to the existing old pipe to the depth and line, level and ...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1...
SUB ESTIMATE FOR FUNCTIONAL HOUSEHOLD TAP CONNECTION(As per individual rates included standpost)
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for Cutting in Cement concrete road surf...
Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,...
Supplying MDPE pipe grade PE80 6kg/cm2,5.3mm thick complete as per specification (WS &UGD Works ) MDPE pipe 15 mm dia ,as per the direction of engineer incharge of work. ---- Bidders are informed to...
Supply and Delivery at site wrought middle steel(galvanised) 15 mm dia GI elbow confirming to IS 1239 11,1991 with latest amendments if any for 15 mm dia GI Elbow ---- Bidders are informed to go throu...
Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any.(vol5 N150A) 15mm Dia GI union ---- Bidders are informed to go throu...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming
to IS 1239-II, 1991 with latest amendments if any(vol 5 N090A) 15mm DIA GI 15mm collor ---- Bidders are informed to go through...
Approved make Electro fusion saddle comply with BS EN 12201-3:2011, PN - 12.5 rating and food grade raw material as per BS 6920 for effect on water quality intended for human consumption. Material of ...
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 15mm Brass bib cock ---- Bidders are informed to go through all tender conditions
Flow control Valve 10 LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball / 1/2 " [15mm] including cost of all materials, labour charges, HOM and testing com...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 withits latest amendments of following size to service connectio...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary,including te...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary,including te...
Supply and fixing of HDPE water meter box with locking arrangementto protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The rantte/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long, weighing not less than 88g. complete as per specifications.(WS & UGD works Vol-II Pg.No.118 It. No.,1...
RISING MAIN LINE FROM OPEN WELL TO SUMP
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution light...
Earth work excavation for pipeline trenches in all kinds of soils by
mechanical means above 600 mm trench width as per drawing and
technical specifications, including setting out, construction of shor...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for
cutting in Cement concrete road surf...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and onveying to work site including loading and unloading at both destinations and ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supply and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design ...
Supplying and fixing kinetic AIR VALVE for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of grade GGG-...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The rantte/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1...
SUMP CUM PUMPHOUSE 2NOs
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete of M25 Design Mix for raft, footings, beams below ground level in GLSR Foundation works. The granite/trap/basalt crushed graded coarse aggre...
Providing and laying in position Reinforced cement concrete M30 Design Mix for vertical side walls, effluent channel baffle walls etc. The granite/trap/basalt crushed graded coarse aggregates and fine...
Providing and laying in position Reinforced cement concrete M30 Design Mix for top cover flat slab. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, ...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat ement to brick masonry including rounding off corners wherever required smooth...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...
Providing and fixing double glazed hermetically sealed glazing in
aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including rovi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after ...
Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any. ---- Bidders are informed to go through all tender conditions
Applying priming coat: With ready mixed aluminium primer of
approved brand and manufacture on resinous wood and plywood
including preparing the surface after thorougly cleaning oil, grease, dirt and f...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Ladder inside the container : Providing anodized aluminium ladder using 65mm x 32mm x 3.0m 'c' section for ladder side channel x 25mm dia , flutal pipe for rungs at 250mm c/c ladder fixed at an angle ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by amming after watering with a lead upto 50 m , and lift upto 1.5 ...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
PUMPIMG MACHINARY AT SUMP NEAR TIDAGUNDI
Supply and delivery of Centrifugal pumpset at site brand new best
make and with discharge duty confirming to ISI standards and its latest amendments (Coman SR BWSS Pg.No. 164 It No.-46.) size 80x65...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments 1x3x6 S...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.80 mm,as per the direction of engineer incharge of work...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments ,as per the direction of engineer incharge of work. ---- Bidders are in...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments ,as per the direction of engineer incharge of work. ---- Bidders a...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. as per the dir...
Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.as per the directio...
LT cast iron pot heads ---- Bidders are informed to go through all tender conditions
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments ,as per the direction of engineer incharge of work. ---- Bidders are informed to go thr...
REPAIRE TO ELSR 100000 litrs 9 mtr Staging
Providing anodised aluminium ladder using 65mm x 32mm x 30mm 'C' section for ladder side channel x 25mm dia flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degree to horizontal incl...
Providing plastering in CM 1:3 proportion after removing old plaster of existing RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffo...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after horoughly cleaning the surface to remove all dirt, dust and foreign matte...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar rops and for...
REPAIRE TO ELSR 1500000 litrs 9 mtr Staging
Ladder inside the container : Providing anodized aluminium ladder using 65mm x 32mm x 3.0m 'c' section for ladder side channel x 25mm dia , flutal pipe for rungs at 250mm c/c ladder fixed at an angle ...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar rops and for...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after horoughly cleaning the surface to remove all dirt, dust and foreign matte...
REPAIRE TO ELSR 3000000 litrs 9 mtr Staging
Ladder inside the container : Providing anodized aluminium ladder using 65mm x 32mm x 3.0m 'c' section for ladder side channel x 25mm dia , flutal pipe for rungs at 250mm c/c ladder fixed at an angle ...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar rops and for...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after horoughly cleaning the surface to remove all dirt, dust and foreign matte...
DETAILED ESTIMATE FOR BULK FLOW METER 3nos
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, as per drawing and tec...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Supply and fixing of Horizontal Mechanical Woltman type hemetically sealed water meters with copper Glass register with IP 68 protection. The meter shall be removable mechanism type manufactured as IS...
SUB ESTIMATE FOE ELECTRIFICATION WORK
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...
Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete. ---- Bidders are...
Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the s...
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. -do- upto 50mm conduit in brick wall ----...
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. -do- upto 50mm conduit in brick wall ----...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing of T5 Fluorescent Tube with 14W power consumption with low 3mg Mercury content & below 40% glass content than T8 lamp & 20% less phosphor coating than T8 with initial lumen on 135...
Supplying and fixing cast aluminium round or oblong type bulk head fitting with GI wire guard, glass cover with 60/100Watts 230V GLS lamp. ---- Bidders are informed to go through all tender conditions
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...
VALVE CHAMBER 8Nos
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
SUB ESTIMATE FOR STAND POST(4007 NOs)
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Proving Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C work including straightening , cutiing , bending , placing, in position ,binding and anchoring to adjacent member...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KANNUR KW4.docx
Tender Document • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .