Providing new gate gearing system and remodelling of canal regulating structures at RD 64500 of Goraya Disty Head

Amount

Dismantling brick work tile, masonry or tile lining in Cement

Dismantling Concrete (Cement concrete plain 1:4:8 or 1:5:10)

Dismantling Concrete Cement concrete plain1:2:4 mix

Cement pointing 1:2 flush on flat brick flooring.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. (Mechanical Means) Depth up to of 3 m

Cement concrete 1:3:6 with stone ballast or shingle Mixing by manual means Mixing by mechanical means using concrete mixer volumetric type

Cement concrete lining 10cm. thick or less with mechanical Paver for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25. With Batching Plant, Transit Mixer and Concrete Pump

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25. Height up to 5m. With Batching Plant, Transit Mixer and Concrete Pump

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level.

First class flat brick 7.50 cm thick laid in reimbursements in and on cement mortar 1:5 on sides of drains and in other work where required over lime concrete or other foundations. All joints to be left completely filled and struck flush.

Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and Technical Specifications

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge.

Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Providing chequred plate 8mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providingof hollow bulb seal (Side Seal) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and fixing in position of flat/wedge Seal including preparation of surface complete in all respect and to entire satisfications of engineer in charge.

Providing & Fixing MS Pipe of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Steel casting as per IS specifications and grade complete in all respect and to entire satisfaction of engineer in-charge.

Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide

Providing and Fixing GI pipe of 1.5" dia complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing J -anchor dia 16mm complete in all respect and to entire satisfaction of engineer in-charge.

Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

CI Housing Cover worm & worm wheel assembly shaft, handle GM Bust with triple start threading inside for sprindle complete including labour charges.

Providing and Fixing MS Spindle of 1 Ton Capacity

Providing and Fixing MS Spindle of 1.5 Ton Capacity

Providing and Fixing MS Spindle of 1.75 Ton Capacity

Any Other Item

THE NEW GONIANA CO-OP L & C SOCIETY LTD