REPAIR TO PLASTERING, BRICK WORK, EXTERNAL PAINTING TO WALL, RAMP SURFACE AND REPAIR TO FOOTPATH, INTERLOCKING TILES, PARAPET BALUSTERS, TREE GUARD TILES, ELECTRIC POLE BASE TILING, KERB STONES CHEQUERED TILES AND MISC B/R WORKS INSIDE FORT WILLIAM U

Amount

Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L cement concrete in sub base or foundation filling and mass concrete type D2 (1:4:8) using 40 mm graded crushed stone aggregate complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like includinguding weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.

S&F in repairs pre-cast reinforced cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregates) for decorative ornamental railing/parapet post of size 150 mm X 150 mm at base and top and 100 mm dia at mid section, of height 630 mm, set in cement mortar 1:4 including taking down of existing old post complete all as specified and directed. (NOTE: Quoted rate is deemed to be inclusive of reinforcement work)

M&L brick work with sub class'B' fly-ash bricks, straight or curved on plan exc 6m radius buit in cement mortar 1:6 complete all as a specified and as directed.

-ditto- but using old serviceable bricks retrieved from demolition

M&L in brick work using old size sub class 'B' fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, laid in alternate bays incl necessary joints and filled up as per SSR part-I, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for 50 mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in floor, finished even and smooth without using extra cement complete all as specified and as directed

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.

M&L for providing PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in surface channels and drains including necessary form work complete all as specified and as directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed

M&L for pre-polished Chequred cement concrete tiles (coloured) of size 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement & pigment to match the surface laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed .

M&L for designer cement concrete tiles of size 150 mm X 75 mm X 18-20 mm thick (with rainbow polymer based continuous tiles) as in vertical surfaces such as skirting, dado, laid over and including 10 mm thick screed bed in cement mortar 1:3, set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. (MAKE: Ultra Tiles, Model: EDEN or equivalent model in other approved makes specified in tender)

M&L for designer cement concrete tiles of size 227 mm X 75 mm X 8-10 mm thick as in vertical surfaces such as skirting, dado, laid over and including 10 mm thick screed bed in cement mortar 1:3, set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. (MAKE: Ultra Tiles, Model: ULTRA BRIQUE or equivalent model in other approved makes specified in tender)

M&L for designer cement concrete tiles of size 230 mm X 80 mm X 8-10 mm thick as in vertical surfaces such as skirting, dado, laid over and including 10 mm thick screed bed in cement mortar 1:3, set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. (MAKE: Ultra Tiles, Model: ULTRA SANTO or equivalent model in other approved makes specified in tender)

M&L for designer cement concrete tiles of size 237 mm X 79 mm X 8-10 mm thick as in vertical surfaces such as skirting, dado, laid over and including 10 mm thick screed bed in cement mortar 1:3, set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. (MAKE: Ultra Tiles, Model: ULTRA MONARCH or equivalent model in other approved makes specified in tender)

M&L for designer cement concrete tiles of size 150 mm X 75 mm X 8-10 mm thick as in vertical surfaces such as skirting, dado, laid over and including 10 mm thick screed bed in cement mortar 1:3, set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. (MAKE: Ultra Tiles, Model: ULTRA MASTRO or equivalent model in other approved makes specified in tender)

M&L for designer cement concrete tiles, 18-20 mm thick, any size as directed, as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shde of tiles, laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. (MAKE: Ultra Tiles, Model: ORBIT / POLKA or equivalent model in other approved makes specified in tender)

M & L for heavy duty coloured ceramic floor tiles of size 300 x 300 x10mm thick in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. (MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

Dubbing out average 10mm thick on irregular face of walls (when specifically ordered in writing)

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S&F 4.0mm plain sheet glass ordinary quality in aluminium, steel or wooden frame with putty in square n. exc 0.5 SQM in each pane complete all as specifed and directed

S&F 4.0mm frosted sheet glass ordinary quality in aluminium, steel or wooden frame with putty in square n. exc 0.5 SQM in each pane complete all as specifed and directed

M & L 20 mm thick Rendering in cement mortar on fair faces of brick work or concrete surface of wall in two layer first layer 10mm thck in cement morter (1:4) and top layer 10mm thick in cement morter (1:4) using water proofing compound (as per manufacturer's instructions) and finishing the surface even and smooth without using extra cement complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

M & L for 15 mm thick plastering in two layers, 10 + 5 mm in cement mortar 1:4 with water proofing compound (@ 3% by weight of cement) on brick/stone walls or concrete surfaces finished even and fair ( upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".

Supply only liquid water proofing compound

M & L 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surface of wall and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar (1:3) to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L Preparing new Surfaces of Walls and applying Three Coats of White wash complete all as specified and as directed.

M&L Preparing new Surfaces of ceiling and applying Three Coats of White wash complete all as specified and as directed.

M&L preparing new Surfaces of Walls and applying Two Coats of Cement Based Paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing newly plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1.5mm thick water proof wall care putty complete all as directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC)

M&L for preparing newly plastered ceiling surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1.5mm thick water proof wall care putty complete all as directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC)

Material and Labour for applying two coats of weather proof exterior emulsion paint (as per manufacturer's specifications) over a coat of external primer to new plastered surfaces on walls including preparation of surfaces including necessary scaffolding and safety measures complete all as specified and directed. (Make of Paint: Asian Paint (Apex Ultima) / ICI Dulux (Weather Shield Max) / Berger (Weather Coat All Guard) / Shalimar Paints (Xtra Maximum) / Nerolac (Excel Total)/ Jotun (Jotashield Water Xtreme)

M&L Preparing new Surfaces of Walls and applying Two Coats of Exterior Emulsion Paint (as per Manufacturer’s instructions) over a coat of alkali resitant primer applied over 1.5mm thick water proof wall care putty for external surfaces complete all as specified and directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC) (Make of Paint: Asian Paint (Apex Ultima) / ICI Dulux (Weather Shield Max) / Berger (Weather Coat All Guard) / Shalimar Paints (Xtra Maximum) / Nerolac (Excel Total)/ Jotun (Jotashield Water Xtreme)

M&L Preparing old Surfaces of Walls and applying Two Coats of Exterior Emulsion Paint (as per Manufacturer’s instructions) over a coat of alkali resitant primer applied over 1.5mm thick water proof wall care putty for external surfaces complete all as specified and directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC) (Make of Paint: Asian Paint (Apex Ultima) / ICI Dulux (Weather Shield Max) / Berger (Weather Coat All Guard) / Shalimar Paints (Xtra Maximum) / Nerolac (Excel Total)/ Jotun (Jotashield Water Xtreme)

M&L complete removal of existing Treatment of old decorated Surfaces of Walls (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots) and applying Two Coats of exterior emulsion paint over a coat of alkali resistant primer complete all as specified and as directed. (Make of Paint: Asian Paint (Apex Ultima) / ICI Dulux (Weather Shield Max)/ Berger (Weather Coat All Guard)/ Shalimar Paints (Xtra Maximum)/ Nerolac (Excel Total)/ Jotun (Jotashield Water Xtreme)

M&L Preparing old decorated plastered surfaces of Walls by washing, rubbing down, stopping and applying One Coat of Exterior Emulsion Paint (as per manufacturer's specifications), complete all as specified and as directed. (Make of Paint: Asian Paint (Apex Ultima) / ICI Dulux (Weather Shield Max) / Berger (Weather Coat All Guard) / Shalimar Paints (Xtra Maximum) / Nerolac (Excel Total)/ Jotun (Jotashield Water Xtreme)

Material and Labour for applying one coat of white wash to old decorated surfaces of wall including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots) complete all as specified and as directed.

Material and labour for applying one coat of white wash to old decorated surfaces of ceiling including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots) complete all as specified and as directed.

M&L applying one coat of cement base paint on walls, cornices incl preparation of old plastered surfaces of wall complete all as specified and directed.

M&L Preparing old decorated surfaces of Walls and applying one coat of oil bound distemper, complete all as specified and as directed.

M&L Preparing old decorated surfaces of Ceiling and applying one coat of oil bound distemper, complete all as specified and as directed.

M&L for applying one coat of exterior acrylic emulsion paint to old decorated external surface of RCC OH Resevoir, over 10 cm width or girth not otherwise described, as per manufacturer's instructions, upto 7.5 m height including necessary scaffolding complete all as specified and directed. (Make of Paint: Asian Paint( Apex Ultima)/ ICI Dilux (Weather Shield Max)/ Berger(Weather Coat All Guard)/ Shalimar Paints (Xtra Maximum)/ Nerolac (Excel Total)/ Jotun (Jotashield Water Xtreme)

- ditto- as per item No. 14 above but for 7.5 m to 15.0 m Heigjht

- ditto- as per item No. 14 above but for 15.0 m to 18.0 m Heigjht

- ditto- as per item No. 14 above but for 18.0 m to 21.0 m Heigjht

M&L for preparation of new surfaces of brick, stone, concrete, asbestos cement or plastered surfaces and applying two coats of synthetic enamel over a coat primer all as directed by Engr-in-Charge.

M&L preparation of old painted/decorated surface of concrete or plastered surfaces of any description and applying one coat of synthetic enamel paint to brick, stone concrete asbestos cement or plastered surfaces all as directed by Engr-in-Charge.

M&L preparation of wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M&L preparation of new or previously untreated surface of steel / iron surfaces of any description over 10 cm width or girth and applying two coats of Synthetic Enamel Paint (First quality) over a coat red oxide complete all as specified and directed.

M&L preparing old Steel Surfaces of any description not otherwise described over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparation of old painted steel / iron surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and directed.

M&L polishing on previously polished floor surfaces of any description with oxalic acid and Bees-wax polishing on floor all as directed by Engr-in-Charge.

M&L for cleaning of inaccesible areas of roof including parapet walls upto 0.50 metre height, removal of vegetation growth, including uprooting, if required, applying two coats of tartaric acid and repair to broken/chipped off plastered surfaces with cement mortar 1:4, finished fair and even including necessary ladder/scaffolding complete all as specified and directed.

M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 sqm) and making good with cement mortar 1:4 duly mixed with liquid water proofing compound @ 200 m/ per 50 kg bag of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid seperately)

Dismantling cast iron work of any description complete all as per specified and directed.

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each complete all as specified and directed.

S&F in repairs 50mm thick precast cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, set in cement mortar 1:4 fixed complete incl dismantling of existing louvers all as specified and directed.

S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 600mmX450mmX75mm thick, of capacity 5MT, fixed in proper position complete all as directed by Engr in Charge

S&F RCPC in repair (Reinforced Cement Polymer Concrete) grating slab on size 900mmX450mmX75mm thick, of capacity 5MT, fixed in proper position complete all as directed by Engr in Charge

S&F RCPC in repair (Reinforced Cement Polymer Concrete) grating slab on size 1200mmX450mmX75mm thick, of capacity 5 MT, fixed in proper position complete all as directed by Engr in Charge

Taking up/down plants or vegtation groth wall upto roof level by means of cutting hole into brick wall and making good the surface of dismatled portion (not exc 150 sqm cm superficial area and not exc one brick depth) using brick bats/aggregate and plastering in cement mortar (1:4) to distributed portion and applying two coat of cement base paint to match existing surface up to forth floor complete allas specified and directed.

Cutting of vegetation, grass, bush, weed, tree height upto 1 mtr above the ground level in around 3 mtr the perihery of manhole, drain etc and removed the tree route complete all as directed by Egnr- in- charge. Note : Quoted rates shall be deemed to include for removing the vegetation, branches etc to a distance exc 500 mtr but not exc 1 km where directed complete all as directed by Engr-in-charge.

SHEIKH ENTERPRISE

UNITED ENGINEERS

MAZUMDER ENTERPRISE

UNIVERSAL TRADING CENTRE

MARUTI ENTERPRISES

S.K. TRADERS

MS HORIZEN

PRABIR TRADERS

M A ENTERPRISES

RAJ ENTERPRISE

ARJUN DAS VALECHA