REPAIR TO PATH, ROAD FURNITURE, ROAD MARKING, PARKING AREA IN CERTAIN OTM ACCN AT ARMY AREA UNDER AGE B/R-I AT UNDER GE (A) JAISALMER

Amount

M&L for Bituminous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bituminous VG-30 Graded) content by weight of total mix including prepration of existing black top/ unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat of bitumen VG-10 grade @ 2.5 Kg/10 Sqm by mechanical sprayer rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge. Note :- Repair of road to be carried out in Patches.

All as per item No. 1.00 here-in-before but priming with tack coat of 5kg/10 sqm and ditto.

M&L for Premix bituminous macadam of paving bitumen of VG-30 grade with 4% binder content by weight of total mix, any penetration laid /rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete rolling to uniform smooth surface with 8 to 10 ton power road roller complete all as specified and directed by Engineer-in-Charge.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam and finishing surfaces of concrete roads, pavements by brooming in area exc 400 Sqmm all (n exc 50 mm deep) and applying evenly a priming tack coat of bitumen VG-10 grade 2.5 Kg/ 10 Sqm by mechanical sprayer complete including complete all as specified and directed by Engineer-in-Charge.

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed by Engineer-in-Charge. Note :- Cat Eye to be solar type as approved by GE.

S&F in repairs cat eye solar two side reflective type of metal aluminium stud body alloy of size 100mm x 100mm x 20mm with PMMA strip lens reflector of Model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions fixed with epoxy complete all as specified and directed by Engineer-in-Charge.

S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engineer-in-Charge. Note :- Dealineator to be of solar type as approved by GE.

S&F slowly SW065ABS plastic speed breaker 250mm X 370mm X 65mm of ABS material with 25mm water crossing drainage facility load capacity 80Ton with hidden interlocking installed as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge.

S& F in repair 750 mm dia Convex mirror mounted on metal sheet body and frame work suitable for road side mounted on angle iron (50 x 50 x 6 mm) for mirror bottom each 1.20 m high above GL and fixed with PCC 1:3:6 type C-2 complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm thick (spread thickness), moorum/red bajri in berms, spread, rolled and consolidated to required gradient & camber complete all as specified and directed by Engineer-in-Charge.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows, etc and the like n exc 10cm wide roads with roads pavements with hot applied thermo plastiv road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine al as per manufacturers instruction complete all as specified and directed by Engineer-in-Charge.

Demolition of concrete in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) as in flooring or mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M/s PRABHU DAN DETHA AND COMPANY

M/s Shri Inder Construction Company

GEMRARAMCONTRACTOR

M/S HARIOM CONSTRUCTION COMPANY

M/S LAXMAN CONSTRUCTION COMPANY