Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1.0 L
Closing Date
29 Feb 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Manoj Kumar
Powergrid corporation of India Ltd,RHQ ER1,Shastri Nagar,Patna,Bihar
BALANCE WORK OF CONSTRUCTION OF GIS STORE FOR LONG TERM PRESERVATION OF SPARES FOR 400 KV GIS CHANDWA SUBSTATION
ER1/NT/S-MISC/DOM/D01/23/11902
Open
Civil - All
Works
Chandwa Substation
₹2,000
₹1.0 L
23 Feb 2024
23 Feb 2024
29 Feb 2024
23 Feb 2024
29 Feb 2024
23 Feb 2024
Name of the Package Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
1 Fill only Green shaded cells in Details and Schedule-I.
2 All the cells in Summary will be auto filled, therefore no cell is required to be filled in that sheet.
3 Instructions ,if any will be displayed automatically after selecting the cell.
Click here to proceed.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Enter the following details of the bidder
Name of the bidder
Alternative E-mail
Schedule-I of Price Bid
Name of the bidder 0 To,
Address 0 Contracts and Materials Department
0 POWER GRID CORPORATION OF INDIA LIMITED
0 VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23
SL. NO. DESCRIPTION OF ITEM UNIT QTY. Rate exclu GST AMOUNT IN Rs.
SECTION-I(EARTH WORK AND SAND FILLING IN FOUNDATION AND PLINTH)
1 Supply and filling in plinth with local sand under floor including, watering, ramming consolidating and dressing complete. Cum 2.33 1799.79 4184.51
2 Providing brick of class designation 75 in one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per specification and direction of Engineer-in-charge. Sqm 19.25 467.22 8991.65
SECTION-II(RCC/PCC WORK)
3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work up to plinth level.1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) Cum 4.91 5772.88 28367.93
4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work up to plinth level.1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 40mm nominal size) Cum 0.04 6676.69 293.77
5 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, finishing and reinforcement-all work up to plinth level.1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) Cum 18.00 7665.89 137986.02
6 Reinforcement cement concrete work in roof beams,suspended floors,roofs having slope upto15 degree, landings, balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centring,shuttering,finishing and reinforcement with 1:1.5:3 (1 cement:1.5coarse sand:3 graded stone aggregate 20mm nominal size). Cum 0.00 9750.42 0.00
7 Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments,posts and struts etc. upto floor five level excluding cost of centring, shuttring,finishing and reinforcement. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum 7.18 9197.42 66037.48
8 Reinforcement fo R.C.C work including straightening,cutting,bending placing in position and binding all complete. Themo-mechanically treated bar Kg 2307.22 91.40 210879.87
9 Centering & Shuttering including 0.00 0.00
a) Foundation,footings,bases of columns etc.for mass concrete Sqm 81.62 332.33 27124.77
b) Columns, Pillars, Piers, Abutments, Posts, Strus Sqm 7.18 814.66 5849.26
c) Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 31.56 624.07 19695.65
d) Wall(any thickness) including attached pilasters, butteresses, plinth & string courses etc. Sqm 25.00 713.98 17849.50
e) Weather shade,Chajjas,corbels etc.,including edges Sqm 0.00 806.02 0.00
SECTION-III(MASONRY WORK)
10 Brick work with F.P.S bricks of class designation 75,in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6(1 cement:6 coarse sand) Cum 7.16 7716.91 55253.08
SECTION-IV(PLASTERING WORK)
11 6mm cement plaster to ceiling of mix: 1:3(1 cement: 3 fine sand) Sqm 95 254.62 24188.90
12 12mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand) Sqm 284.59 291.23 82881.15
SECTION-V(FLOORING WORK)
13 Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. Cum 86.561 843.94 73052.29
14 Dry stone pitching 322.5 cm thick laid in courses and required prifile with hammer dressed stones having no side less than 15 cm with minimum depth 20cm including preparing the badding surface etc.all complete (payment for stone to be made separately) Sqm 18.05 558.52 10081.29
15 cement plaster skirting up to 30 cm height with cement morter 1:3 (1 cement: 3 course sand) finished with a floating coat of neat cement 18 mm thick Sqm 10 561.06 5610.60
SECTION-VI(CARPENTARY,STEEL AND HARDWARE WORKS)
16 Providing wood work in frames of doors, windows,clerestory windows and other frames wrought anf fixed in position with hold fast lugs or with dash fasteners of required dia & length( hold fast lugs or dash fasteners shall be paid for separately)sal wood Cum 0.15 98746.02 14811.90
17 Providing and fixing ISI marked flush door shutters non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face neneers on both faces of shutters: 35 mm thick including anodised aluminium butt hinges with necessary screws. Sqm 5.2 2027.67 10543.88
18 Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/ appropriate Z section and other section of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e at top bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and joined mechanically whereever required including cleat angle, aluminium snap beading for glazing /paneling, C.P. brass /stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge.( Glazing,paneling and dash fasteners to be paid for separately):
a) For shutters of doors, windows & ventilaors including providing & fixing hinges/pivots and making provision for fixing of fitings wherever required including the cost of EPDM rubber /neoprene gasket required(fittings shall be paid for separately) anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) kgs 610 507.29 309446.90
19 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Neoprene gasket etc. complete as per the architectural drawing and the direction of engineer-incharge. (cost of aluminium snap bading shall be paid in basic item.)
a) With glass panes of 5.50 mm thickness(weight not less than 13.75 kg/sqm) Sqm 34.5 1275.64 44009.58
20 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete fixed toopening/wooden frames with rawl plugs screws etc. kgs 810 201.99 163611.90
21 Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS :1868),Transperent or dyed to required colour or shade with nuts and screws etc. complete :
22 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour or shade with necessary screws etc. complete:
23 Providing and fixing aluminium pull bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour or shade with necessary screws bolts nut and washers etc. complete: each 2 85.42 170.84
24 Providing and fixing aluminium handles ISI marked anodised (anodiccoating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour or shade with necessary screws etc. complete: 125mm
25 supply and fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length and joined together at the end by end locks, mounted on specially designed pipe shaft with nrackets,side guides and arrangements for inside and outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454-part 1 and M.S. top cover of required thickness for rolling shutters. 80X1.20 mm M.S. laths with 1.20 mm thick top cover sqm 48 2802.58 134523.84
26 Extra for providing mechanical device and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area Sqm 48 1001.53 48073.44
27 steel works in built-up tubular (round square or rectrangular hollow tubes)trusses including cutting,hoisting fixing in position and applying a priming coat of approved steel primer,welded and bolted including special shaped washers etc. complete
a) Hol finished seamless type tubes Kg 15000 174.87 2623050.00
28 Providing and fixing colour coated durashine roof profile sheet of nom. 1015 mm effective cover width and nominal 28 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre to centre. The end ribs shall be designed for anti-capill. Sqm 380 311.75 118465.00
SECTION-VII(FINISHING WORK)
29 Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade:
a) New work (two or more coats applied@ 1.46 kg/10 sqm )over and including base coat of waterproffing cement paint snowcem plus or equivalent applied@ 2.20 kg/10sqm. Sqm 630 145.00 91350.00
30 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
a) New work (two or more coats )over and includingpriming coat with cement primer. Sqm 405 157.33 63718.65
31 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and anufacture. Sqm 187 191.74 35855.38
SECTION-VIII(MISCELLANIOUS ITEMS)
32 Providing and fixing circular/hexagonal M.S sheet ceiling fan box with clamp of internal dia 140mm,73 mm height,3mm thich rim, top and bottom lid of 1.5mm M.S sheet. Lida shall be screwed into M.S box by means of 3mm round headed screws,clamps shaall be made of 12 mm dia M.S Bar bent to shape as per standard drawing with over all length as 80 cm. each 13 186.99 2430.87
33 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, lerraces/sunken slabs etc. consisting of following operations.
Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by engineer-in-charge over the RCC slab including adjoining walls up to 300mm height including cleaning the surface before treatment. Laying brick bats 25mm to 115mm size with 50% of cement morter 1:5 (1 cement: 5 coarge sand) admixed with proprietary water profing compound conforming to IS: 2645 over 20mm thick layer of cement morter of mix 1:5 (1 cement: 5 coarse sand) admixed with propietary water proofing compound conforming to IS:2645 and approved by engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions to walls and slabs.
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS:2645 and approved by Engineer-in-charge
Finishing the surface with 20mm thick jointless cement morter of mix 1:4 (1 cement: 4 coarse sand) admixed with proprietary water proofing compound conforming to IS:2645 and laying approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowelwith neat cement slurry and making pattern of 300X300mm square 3mm deep.
The whole terraceso finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge.
The whole twrrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge.
a) With average thickness of 120mm and minimum thickness at khurra as 65mm Sqm 143.4 1427.63 204722.14
34 Making khurras 45X45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mX 1m X400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outer complete. each 3 252.75 758.25
35(a) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A. Including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. Metre 23 319.83 7356.09
(b) Providing and fixing on wall face unplasticide-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A. Including jointing with seal ring conforming to IS: 5382,Leaving 10mm gap for thermal expansion,110 mm bend each 3 127.42 382.26
(c) Provididng and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised-Rigiing PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Shoe(plain)110 mm shoe each 3 111.31 333.93
(d) Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.s screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement:4 coarse sand) and making good the wall etc . complete.110mm each 29 314.66 9125.14
36 Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement:3coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed on dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sqm 30 635.00 19050.00
TOTAL AMOUNT OF CIVIL WORKS(Rs) 4684060.89
SL. NO. DESCRIPTION OF ITEM UNIT QTY. Rate Exclu GST Amount in Rs
E : ELECTRICAL WORKS
1 Point wiring in PVC conduit, with modular type switch: Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FR LS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
(a) Group C Point 58 1309.82 75969.56
2 Power plug wiring in PVC conduit (2x4 sq. mm) : Wiring for light/ power plug with 2x4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 no. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required Meter 80 298.21 23856.80
3 Circuit/ sub main wiring in PVC conduit : Wiring for circuit/ submain wiring alongwith earthwire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. Meter 0.00
(a) 2x1.5 sq. mm. + 1x1.5 sq. mm. earth wire Meter 50 208.04 10402.00
(b) 2x2.5 sq. mm. + 1x2.5 sq. mm. earth wire Meter 240 245.54 58929.60
(c) 2x6 sq. mm. + 1x6 sq. mm. earth wire Meter 30 391.96 11758.80
(d) 4x10 sq. mm. + 2x6 sq. mm. earth wire Meter 25 897.32 22433.00
4 Telephone wiring in existing conduit : Supplying and drawing following pair, 0.5 sq. mm FR PVC insulated copper 0.00
(a) 2 Pair Meter 50 33.93 1696.50
5 S/F PVC conduit : Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess 0.00
6 S/F modular type switch/ socket : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00
(a) 5/6A switch Each 6 91.95 551.70
(b) 3 pin 5/6 socket outlet Each 6 108.93 653.58
(c) Telephone socket outlet Each 2 132.14 264.28
7 S/F modular boxes,base & cover plate : Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess as required. 0.00
(a) 1 or 2 Module ( 75 mmx 75 mm) Each 3 266.07 798.21
8 S/F modular boxes,base & cover plate : Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess as required. Each 10 35.71 357.10
9 S/F light plug point modular type accessories : Suppling and fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet amd 5/6 amps modular switch , connection, painting etc. as required. (For light plugs to be used in non residential buildings). Each 4 425.89 1703.56
10 S/F light plug point modular type accessories : Suppling and fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet amd 15/16 amps modular switch, connection, painting etc. as required. Each 4 523.21 2092.84
11 S/F Ceiling rose; supplying and fixing 3 pin,5 amp. Ceiling rose on the existing junction box/wooden block including connection etc,as required. Each 50 77.68 3884.00
12 Supplying and fixing stepped type electronic fan regulator on existing modular plate switch box including connections etc. as required. Each 4 329.46 1317.84
13 S/F Holder: supplying and fixing brass batten/ angle holder including connection etc as required. Each 8 116.96 935.68
14 Installation Testing and commissioning of prewired, fluorescent fitting/compact fluorerscent fitting af all types. Complete with all accessories and tube etc, directly on ceiling/wall including, connection with 1.5sqmm FRLS Insulated, copper conductor,single core cable, and earthing etc as required. Each 52 183.93 9564.36
S.H-II:- FITTINGS AND ACCESSORIES (LIGHTS) 0.00
15 Supply and fixing of 20W CFL lamp in exising electrical fitting/fixture etc. as required. Each 8 143.94 1151.52
16 Supplying fitting and fixing single wall mounted 20/22 watt LED type batten fitting complete with electronic driver and LED tube etc. directly on wall/ceiling including connection with 1.5 sq mm FR PVC insulater copper conductor and earthing the body etc. Each 40 1784.77 71390.80
17 Supplying fitting and fixing single 40/45 watt LED type Street light with die cast aluminium housing for ingres protection of IP65 and complete with all accessories etc. on pole/building including connection with 1.5 sq mm FR PVC insulator copper conductor and earthing the body etc. Each 6 6775.38 40652.28
S.H-III FITTINGS AND ACCESSORIES (FANS) 0.00
18 Supply and Installation of 400mm,230V AC wall/cabin fan including fixing the bracket, making connection , testing ,commissioning etc as required. Each 1 1724.38 1724.38
19 Supplying and Installation of regular/standard model ceiling fan of 1200mm sweep including wiring of down rods of standard length (up to 30cm) with 1.5 sq mm FRPVC Insulated copper conductoer cable as required. Each 4 1527.90 6111.60
S.H-III ; BOARD & D.B' S 0.00
20 S/F TCP MCB DB: Supplying and fixing following way, three pole and neutral, sheet steel,MCB distribution board ,415 0.00
(a) 4 Way (4+12) Double door, horizontal type Each 1 3652.68 3652.68
(b) 12 Way Double door SPN DB Each 1 2066.96 2066.96
21 S/F 'C' Series SP MCB: supplying and fixing 5 amps to 32 amps rating , 240 volts c series miniature circuit breaker 0.00
(a) single pole Each 24 228.57 5485.68
22 S/F SPN RCCB: Supplying and fixing following rating,double pole,(single phase and neutral) 240 volts residual current circuit breaker (RCCB) having a sensitivity current upto 300 milliampere in the existing MCB DB complete with 63 amps Each 1 2430.36 2430.36
23 S/F TPN RCCB Supplying and fixing following rating, four pole (three phase and neutal) 415 volts residual current. 0.00
S.H-IV:- EARTHING, CABLE AND PANEL WORK 0.00
24 Providing and laying earthing connection from earth electrode with 6 SWG dia G.I wire in 15mm dia GI Pipe earh electrode as required, all complete as per specification and direction of E/I. Meter 30 256.25 7687.50
25 Earthing with GI earth pipe 4.5 mtr long, 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. Each 6 1968.02 11808.12
26 Earthing with G.I earth plate 600mm x 600mm x 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe of 2.7 meter lomg etc, with charcoal/coke salt as required. Each 2 6671.43 13342.25
27 Supplying and fixing 25x5mm G.I. strip in 40mm dia G.I. pipe from earth electrode all complete as per specification and direction of E/I. Meter 12 630.36 7564.32
28 Supplying and laying following sizes and core PVC /XLPE insulated PVC sheathed, Heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforms to IS:1554, PART-1) 0.00
29 supplying & fixing panel mounted 4 pole on load change over switch 100A inside the existing cubicle panel board, including drilling holes in cubicle panel, including connections etc. as required Each 1 4068.77 4068.77
30 supplying & fixing wall/ floor mounted cubicle panel board, fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector including busbar chamber, insulator and painting etc. as required (but without busbar) Sq. ft. 12 784.25 9411.00
31 Providing and fixing following rating and capacity four pole MCCB in existing panel board, including drilling holes in cubicle panel, making connections etc. as required 0.00
32 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty complete with, INDICATOR LIGHT, VOLT AMMETER METER, all accessories including connections, earthing the body etc. as required. 0.00
33 S/F TPN: Supplying and fixing following rating, four pole MCB, (three phase and neutral) 415 volts, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00
34 S/F TPN isolator: Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00
TOTAL AMOUNT ELECTRICAL WORK (Rs) 481403.94
GRAND TOTAL AMOUNT(Rs)/(CIVIL WORK + ELECTRICAL WORK) (excluding GST) 5165465
Above (+)and below (-)(in %): To be quoted by bidder
Quoted Price 5165464.83
GST (in percentage )@ 0
Total amount including taxes 5165464.83
Note: If any part of price which required to be filled by bidder kept blank, the bid price shall be considered as inclusive and evaluation shall be done accordingly
Date 0 Printed name 0
Place 0 Designation 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Name of the bidder 0 To,
Address 0 Contracts and Materials Department
0 POWER GRID CORPORATION OF INDIA LIMITED
0 VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23
We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents. We have indicated Total Estimated Cost as indicated in the "Bill of Quantity(BOQ) & Prices" covering entire scope of works enclosed herewith as Schedule-I.
I Total for Installation/Services as per Schedule-I 5,165,465
II Total GST on services/Installation as per Schedule-I 0.00
III Toal BID Price including all taxes 5165465
Date 0 Printed Name 0
Place 0 Designation 0
Name of Package : Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Contract Period 10 months
: Attachments : General guidelines for filling up the Attachments : CT Analyser - :
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Specification No.: 5002003080
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments 3(QR), 4, 5, 6, 7, 9, 10, 11, 12, 13,14, 15, 16, 17 and Bid Form for 1st Envelope are included here.
3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.
5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. This attachment is not included here.
6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
5002003080 Individual Firm 1
Licensee of a Manufacturer 2
Enter following details of the bidder Representative of a Manufacturer
Specify type of Bidder [Select from drop down menu] #REF!
Name of Lead Partner
Address of Registered Office …….. …… ………. ……….
Name of Other Partner …….. …… ………. ……….
Printed Name …….. …… ………. ………. 01/Dec/25
Designation …….. …… ………. ……….
RFX No. :5002003080 Attachment-3(JV) 0 #REF! 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Joint Venture Agreement and Power of Attorney for Joint Venture*)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials #REF!
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
Name(s) and Addresse(s) of other partner(s)
Name : #REF! #REF!
Address : #REF! #REF!
The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith.
Date : Printed Name : …….. …… ………. ………. 0
Place : …….. …… ………. ………. Designation : …….. …… ………. ………. 10 months
RFX No. :5002003080 Attachment-3(QR) 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Qualifying Requirement Data)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
For our Qualifying Requirements Data, please refer Schedule-QR of this volume.
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-4 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Form of Certificate of Origin and Eligibility)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby certify that equipment and materials to be supplied are produced in [Enter the name of country where from equipments & material shall be supplied] eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]
We hereby certify that our company is incorporated and registered in [Enter the name of country where from equipments & material shall be supplied] eligible source country.
Date : Printed Name : …….. …… ………. ……….
country. country. [Enter the name of country where from equipments & material shall be supplied] [Enter the name of country where from equipments & material shall be supplied]
RFX No. :5002003080 Attachment-4(A) 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.
S.No. For Equipment Item Description Unit Quantity
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-4(B) 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-5 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Bought-out & Sub-contracted Items)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of the subject Package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-5 0
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-6 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-6 0
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-7 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Details of Alternative Bid)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
No Alternative Bid
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-8 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Manufacturer's Authorization Form)
Contracts and Materials
Power Grid Corporation of India Ltd.,
"Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001 Name of Manufecture Name/Description of Goods Factory Address Name & Address of Bidder package name alongwith project name
…(insert name of the Manufacturer) .. …(insert name and/or description of the goods) … ..(insert address of factory) .. Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation including the above plant & equipment or other goods produced by us. 0
WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations.
We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract. ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability).
For and on behalf of the …(insert name of the Manufacturer) .. to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation including the above plant & equipment or other goods produced by us. We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.
In the capacity of
Date : Printed Name : …….. …… ………. ……….
Note :1 The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid.
2 Above undertaking shall be registered or notarized so as to be legally enforceable.
RFX No. :5002003080 Attachment-9 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Work Completion Schedule)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby declare that the following Delivery Schedule shall be followed by us for the subject Package i.e., Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation for the period commencing from the effective date of Contract to us :
Sl. No. Description of Work Period in months from the effective date of Contract
1 Submission of drawings for Approval
2 Production of samples for type testing
3 Completion of type tests
4 Commencement of Commercial Production
5 Offer of material for pre-despatch testing and inspection
6 Commencement of shipment
1 Completion of shipment (Receipt at final destination Site)
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-10 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Guarantee Declaration)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We conform that the equipments offered shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-11 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-11 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name of Other Partner To:
Contracts and Materials
Name : …….. …… ………. ………. Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-12 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Price Adjustment Data)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation The necessary documentary evidence are enclosed :
Sl. No. Name of Materials Value of co-efficient Name of the published index * Value of index as 30 days prior to date set for opening of bids as on **
1 EC grade aluminium ingots, co-eifciant a = 0.65 CACMAI
High Tensile Galvanised Steel wires , co-efficient b = 0.15 CACMAI FALSE FALSE
High Carbon Steel Rods , co-efficient b = High Tensile Galvanised Steel wires , co-efficient b =
High Grade Electrolytic Zinc , co-efficient c =
3 Labour, Co-efficient l= 0.05 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Note: * Indicate the publisher of the index.
** Indicate the date of indices for which the values are being furnished.
^ For bidders who intend to quote their prices based on High Tensile Galvanised Steel wire, the coefficient for the same (i.e. coefficient ’b’ for High Tensile Galvanised Steel wire) shall be 0.15 and coefficient ‘c’ shall not be applicable.
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-13 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Declaration regarding Social Accountability)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-14 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
Date : Printed Name : …….. …… ………. ……….
Instruction for printing & submitting Integrity Pact
1. The requisite format of Integrity Pact (if required)is attached in Vol-I of Bid Documents.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (n).
Specification No. : 5002003080 Attachment-15 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Information for E-payment, PF details and declaration for Micro/Small and Medium Enterprise)
Bidder's Name and Address (Sole Bidder [Individual Firm]): To:
Contracts and Materials
Name: 0 Power Grid Corporation of India Ltd.,
Address: …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidyut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We are furishing the following details of Statutory Registration Numbers and details of Bank for electronic payment
1 Name of the Supplier/ Contractor in whose favour payment is to be made
2 Address with PIN Code and State
Registered Office:
Correspondence Address:
3 Status- Company/others [Declaration of Micro/ Small/Medium Enterprtise ]
4 Permanent Account [PAN] No.
5 Goods & Services Tax [GST] No.
6 PF Registration No. Of the Company
7 PF Regional Office covered (with Address)
8 Name of Contact Person
9 Telephone No(s)
10 Bank Details for Electronic Payment
Name ofthe Bank:
Address of the Branch:
Type of Account: Savings/Current
11 9 digit MICR code printed at bottom in middle, next to cheque no.
12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that thepayment onaccount of this Contract, in the event of Award, be made in the above account maintained in theabove mentioned Bank.
RFX No. :5002003080 Attachment-16 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
(Additional Information)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : ……………………………… Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):
1.0 The Bidder shall furnish
A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]
1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:
Name of the (Lead Partner) :
Name of the Banker by whom certificate issued
Date of certificate (should not be earlier than 3 months prior to date of bid opening)
Whether fund based/non fund based limits are indicated in the certificate
Whether extent of utilization is indicated in the certificate
1.2 The Bidder should accordingly also provide the following information/documents
(i) Details of Banker:
Address of Banker
Contact Name and Title
(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:
Sl. No. Letter Ref. Date Addressed to (name of the Bank)
2.0 Litigation History
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]
2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years
Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount
3.0 Description of the plant for carrying out the work
Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.
4.0 OTHER INFORMATION
4.1 Current Contract Commitments of works in progress
Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.
Details of Contract Type of Conductor Ordered Quantity as per Contract Balance Quantity to be supplied as on Completion Period for balance quantity
Commencement Completion
4.2 Financial Data:
Details Actual (Previous five years) Projection for next five years
Total Liability
Current Liability
Profit before taxes
Profit after taxes
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Attachment-17 0
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
Date : Printed Name : …….. …… ………. ……….
RFX No. :5002003080 Bid Form 1st Envelope 0 1 one 1 st 1 January
2 two 2 nd 2 February
BID FORM (First Envelope) 3 three 3 rd 3 March
4 four 4 th 4 April
Bid Proposal Ref. No. 5 five 5 th 5 May
Date : 6 six 6 th #VALUE! 6 June
7 seven 7 th #VALUE! 7 July
To: 8 eight 8 th #VALUE! 8 August
Contracts and Materials 9 nine 9 th #VALUE! 9 September
Power Grid Corporation of India Ltd., 10 ten 10 th 10 October
Eastern Region Transmission System-I 11 eleven 11 th 11 November
Vidut Board Colony, 12 twelve 12 th 12 December
Shastri Nagar Patna 800023 13 thirteen 13 th
14 fourteen 14 th
Name of Contract : Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation 15 fifteen 15 th
Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th
1.0 Having examined the Bidding Documents, including Amendment Nos. dated 00/01/1900 the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th
2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th
In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th
(b) Attachment 2() : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Please note that if bid validity is less than 07 (seven) months, your bid may be rejected Bank Guarantee (0) 21 st
(c) Attachment 3() : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th
#REF! Applicable 23 th
#REF! Not Applicable 24 th
(d) Attachment 4() : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. 25 th
(e) Attachment 5() : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th
(f) Attachment 6() : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(g) Attachment 7() : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. [NOT APPLICABLE] 28 th
(h) Attachment 8() : Manufacturer’s Authorisation Forms. 29 th
(i) Attachment 9() : Work Completion Schedule. 30 th
(j) Attachment 10(): Guarantee Declaration. 31 st
(k) Attachment 11(): Information regarding ex-employees of Purchaser in our firm.
(l) Attachment 12(): Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.[NOT APPLICABLE]
(m) Attachment 13(): Declaration regarding Social Accountability.
(n) Attachment 14(): Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.[NOT APPLICABLE]
(o) Attachment 15(): Information for E-payment, PF Details & declaration regarding Micro/Small & Medium Enterprises.
(p) Attachment 16(): Additional Information.
(q) Attachment 17(): Declaration.
3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.
4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Goods, in and outside of India.
4.1 100% of applicable Taxes and Duties, which are payable by the Purchaser under the Contract, shall be reimbursed by the Purchaser after despatch of goods on production of satisfactory documentary evidence by the Supplier in accordance with the provisions of the Bidding Documents.
4.3 We also understand that, in case of award on us, you shall reimburse to us octroi/entry tax as applicable for destination site/state on all items of supply. Further, Service Tax, if applicable, for the services to be rendered by us, the same is included in our bid price in Second Envelope.
4.4 We confirm that we shall also get registered with the concerned Sales Tax Authorities, in all the states where the project is located.
5.0 Construction of the Contract
5.1 We declare that we have studied clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us the Contracts covering all goods and related services.
6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:
[a] Bid document Fee Clause 3.0 of SCC.
[b] Bid Security/ Bid Guarantee Clause No 13.0, ITB, Section -II, and cl. 4.0 of SCC, Section-IV, Volume-I.
[c] Terms of Payment Clause No.64.0, Conditions of Contract (GCC) & Clause 12.0, SCC
[d] Contract Performance Guarantee/Performance Security Clause No.14, Section GCC, Vol.-I, Conditions of Contract & Clause 13.0 of SCC, Section-IV, Vol-I.
[e] Liquidated Damages Clause No 11.0 of SCC, Volume-I
[f] Price & Price Basis Clause No 11.0 of ITB,
[g] Guarantee & Defect Liability Period Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 9.0 of SCC, Volume- I
[h] Work schedule Clause No. 10.0 of SCC, Volume -I
Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.
7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.
8.0 If our bid is accepted, we undertake to provide an Advance Payment Security and Performance Security(ies) in the form and amounts, and within the times specified in the Bidding Documents.
9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period
10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.
11.0 We understand that you are not bound to accept the lowest or any bid you may receive.
12.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:
Name and address of agent Amount and Currency Purpose of Commission or gratuity
(If none, state “none”)
13.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : Printed Name : …….. …… ………. ……….
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 () : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.
ElectronicForms™
View - Template of ElectronicForm™
To close this Screen, click on the [Close] button located on the bar above, or at the bottom of the Screen
Template of ElectronicForm™
Relevant Bid-Part Techical
ElectronicForm™ Template ID 7PG-2010-FT000010
Template Reference TECHNO-COMMERICIAL (First Envelope)
Template Description Tower Package RFX No. : 5002003080
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Bidders's Name #REF!
Section-2 (Outline of Requirements)
* 1 Integrity Pact Details
Submitted (Doc. Code No. DC-9008-April-2009-Rev-0) Yes
* 2 BID SECURITY DETAILS
2 (a) Submitted Yes
* 2 (b) Bid Security No.
* 2 (c) Issued by (Name of Bank)
* 2 (d) Bid Security Amount 0 0.00
* 2 (e) Valid upto
* 1. AUTHORIZED SIGNATORY (Sole Bidder / Lead Partner of JV)
1 (b) Designation …….. …… ………. ……….
2. AUTHORIZED SIGNATORY (Other Partner of JV)
(If Bidder is JV)
2 (a) Name #REF!
2 (b) Designation #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Name of the Package Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
Balance work of Construction of GIS store for long term preservation of spares for 400 KV GIS Chandwa Substation
SL. NO. DESCRIPTION OF ITEM UNIT QTY.
SECTION-I(EARTH WORK AND SAND FILLING IN FOUNDATION AND PLINTH)
1 Supply and filling in plinth with local sand under floor including, watering, ramming consolidating and dressing complete. Cum 2.33
2 Providing brick of class designation 75 in one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per specification and direction of Engineer-in-charge. Sqm 19.25
SECTION-II(RCC/PCC WORK)
3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work up to plinth level.1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) Cum 4.91
4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work up to plinth level.1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 40mm nominal size) Cum 0.04
5 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, finishing and reinforcement-all work up to plinth level.1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) Cum 18.00
6 Reinforcement cement concrete work in roof beams,suspended floors,roofs having slope upto15 degree, landings, balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centring,shuttering,finishing and reinforcement with 1:1.5:3 (1 cement:1.5coarse sand:3 graded stone aggregate 20mm nominal size). Cum 0.00
7 Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments,posts and struts etc. upto floor five level excluding cost of centring, shuttring,finishing and reinforcement. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum 7.18
8 Reinforcement fo R.C.C work including straightening,cutting,bending placing in position and binding all complete. Themo-mechanically treated bar Kg 2307.22
9 Centering & Shuttering including
a) Foundation,footings,bases of columns etc.for mass concrete Sqm 81.62
b) Columns, Pillars, Piers, Abutments, Posts, Strus Sqm 7.18
c) Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 31.56
d) Wall(any thickness) including attached pilasters, butteresses, plinth & string courses etc. Sqm 25.00
e) Weather shade,Chajjas,corbels etc.,including edges Sqm 0.00
SECTION-III(MASONRY WORK)
10 Brick work with F.P.S bricks of class designation 75,in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6(1 cement:6 coarse sand) Cum 7.16
SECTION-IV(PLASTERING WORK)
11 6mm cement plaster to ceiling of mix: 1:3(1 cement: 3 fine sand) Sqm 95
12 12mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand) Sqm 284.59
SECTION-V(FLOORING WORK)
13 Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. Cum 86.561
14 Dry stone pitching 322.5 cm thick laid in courses and required prifile with hammer dressed stones having no side less than 15 cm with minimum depth 20cm including preparing the badding surface etc.all complete (payment for stone to be made separately) Sqm 18.05
15 cement plaster skirting up to 30 cm height with cement morter 1:3 (1 cement: 3 course sand) finished with a floating coat of neat cement 18 mm thick Sqm 10
SECTION-VI(CARPENTARY,STEEL AND HARDWARE WORKS)
16 Providing wood work in frames of doors, windows,clerestory windows and other frames wrought anf fixed in position with hold fast lugs or with dash fasteners of required dia & length( hold fast lugs or dash fasteners shall be paid for separately)sal wood Cum 0.15
17 Providing and fixing ISI marked flush door shutters non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face neneers on both faces of shutters: 35 mm thick including anodised aluminium butt hinges with necessary screws. Sqm 5.2
18 Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/ appropriate Z section and other section of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e at top bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and joined mechanically whereever required including cleat angle, aluminium snap beading for glazing /paneling, C.P. brass /stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge.( Glazing,paneling and dash fasteners to be paid for separately):
a) For shutters of doors, windows & ventilaors including providing & fixing hinges/pivots and making provision for fixing of fitings wherever required including the cost of EPDM rubber /neoprene gasket required(fittings shall be paid for separately) anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) kgs 610
19 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Neoprene gasket etc. complete as per the architectural drawing and the direction of engineer-incharge. (cost of aluminium snap bading shall be paid in basic item.)
a) With glass panes of 5.50 mm thickness(weight not less than 13.75 kg/sqm) Sqm 34.5
20 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete fixed toopening/wooden frames with rawl plugs screws etc. kgs 810
21 Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS :1868),Transperent or dyed to required colour or shade with nuts and screws etc. complete :
a) 300X16mm each 4
22 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour or shade with necessary screws etc. complete:
a) 300x10mm each 2
23 Providing and fixing aluminium pull bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour or shade with necessary screws bolts nut and washers etc. complete: each 2
24 Providing and fixing aluminium handles ISI marked anodised (anodiccoating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour or shade with necessary screws etc. complete: 125mm
a) 100mm each 48
25 supply and fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length and joined together at the end by end locks, mounted on specially designed pipe shaft with nrackets,side guides and arrangements for inside and outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454-part 1 and M.S. top cover of required thickness for rolling shutters. 80X1.20 mm M.S. laths with 1.20 mm thick top cover sqm 48
26 Extra for providing mechanical device and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area Sqm 48
27 steel works in built-up tubular (round square or rectrangular hollow tubes)trusses including cutting,hoisting fixing in position and applying a priming coat of approved steel primer,welded and bolted including special shaped washers etc. complete
a) Hol finished seamless type tubes Kg 15000
28 Providing and fixing colour coated durashine roof profile sheet of nom. 1015 mm effective cover width and nominal 28 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre to centre. The end ribs shall be designed for anti-capill. Sqm 380
SECTION-VII(FINISHING WORK)
29 Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade:
a) New work (two or more coats applied@ 1.46 kg/10 sqm )over and including base coat of waterproffing cement paint snowcem plus or equivalent applied@ 2.20 kg/10sqm. Sqm 630
30 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
a) New work (two or more coats )over and includingpriming coat with cement primer. Sqm 405
31 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and anufacture. Sqm 187
SECTION-VIII(MISCELLANIOUS ITEMS)
32 Providing and fixing circular/hexagonal M.S sheet ceiling fan box with clamp of internal dia 140mm,73 mm height,3mm thich rim, top and bottom lid of 1.5mm M.S sheet. Lida shall be screwed into M.S box by means of 3mm round headed screws,clamps shaall be made of 12 mm dia M.S Bar bent to shape as per standard drawing with over all length as 80 cm. each 13
33 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, lerraces/sunken slabs etc. consisting of following operations.
Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by engineer-in-charge over the RCC slab including adjoining walls up to 300mm height including cleaning the surface before treatment. Laying brick bats 25mm to 115mm size with 50% of cement morter 1:5 (1 cement: 5 coarge sand) admixed with proprietary water profing compound conforming to IS: 2645 over 20mm thick layer of cement morter of mix 1:5 (1 cement: 5 coarse sand) admixed with propietary water proofing compound conforming to IS:2645 and approved by engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions to walls and slabs.
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS:2645 and approved by Engineer-in-charge
Finishing the surface with 20mm thick jointless cement morter of mix 1:4 (1 cement: 4 coarse sand) admixed with proprietary water proofing compound conforming to IS:2645 and laying approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowelwith neat cement slurry and making pattern of 300X300mm square 3mm deep.
The whole terraceso finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge.
The whole twrrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge.
a) With average thickness of 120mm and minimum thickness at khurra as 65mm Sqm 143.4
34 Making khurras 45X45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mX 1m X400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outer complete. each 3
35(a) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A. Including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. Metre 23
(b) Providing and fixing on wall face unplasticide-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A. Including jointing with seal ring conforming to IS: 5382,Leaving 10mm gap for thermal expansion,110 mm bend each 3
(c) Provididng and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised-Rigiing PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Shoe(plain)110 mm shoe each 3
(d) Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.s screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement:4 coarse sand) and making good the wall etc . complete.110mm each 29
36 Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement:3coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed on dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sqm 30
SL. NO. DESCRIPTION OF ITEM UNIT QTY.
E : ELECTRICAL WORKS
1 Point wiring in PVC conduit, with modular type switch: Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FR LS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
(a) Group C Point 58
2 Power plug wiring in PVC conduit (2x4 sq. mm) : Wiring for light/ power plug with 2x4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 no. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required Meter 80
3 Circuit/ sub main wiring in PVC conduit : Wiring for circuit/ submain wiring alongwith earthwire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. Meter
(a) 2x1.5 sq. mm. + 1x1.5 sq. mm. earth wire Meter 50
(b) 2x2.5 sq. mm. + 1x2.5 sq. mm. earth wire Meter 240
(c) 2x6 sq. mm. + 1x6 sq. mm. earth wire Meter 30
(d) 4x10 sq. mm. + 2x6 sq. mm. earth wire Meter 25
4 Telephone wiring in existing conduit : Supplying and drawing following pair, 0.5 sq. mm FR PVC insulated copper
(a) 2 Pair Meter 50
5 S/F PVC conduit : Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess
(a) 20 mm Meter 50
6 S/F modular type switch/ socket : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
(a) 5/6A switch Each 6
(b) 3 pin 5/6 socket outlet Each 6
(c) Telephone socket outlet Each 2
7 S/F modular boxes,base & cover plate : Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess as required.
(a) 1 or 2 Module ( 75 mmx 75 mm) Each 3
8 S/F modular boxes,base & cover plate : Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess as required. Each 10
9 S/F light plug point modular type accessories : Suppling and fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet amd 5/6 amps modular switch , connection, painting etc. as required. (For light plugs to be used in non residential buildings). Each 4
10 S/F light plug point modular type accessories : Suppling and fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet amd 15/16 amps modular switch, connection, painting etc. as required. Each 4
11 S/F Ceiling rose; supplying and fixing 3 pin,5 amp. Ceiling rose on the existing junction box/wooden block including connection etc,as required. Each 50
12 Supplying and fixing stepped type electronic fan regulator on existing modular plate switch box including connections etc. as required. Each 4
13 S/F Holder: supplying and fixing brass batten/ angle holder including connection etc as required. Each 8
14 Installation Testing and commissioning of prewired, fluorescent fitting/compact fluorerscent fitting af all types. Complete with all accessories and tube etc, directly on ceiling/wall including, connection with 1.5sqmm FRLS Insulated, copper conductor,single core cable, and earthing etc as required. Each 52
S.H-II:- FITTINGS AND ACCESSORIES (LIGHTS)
15 Supply and fixing of 20W CFL lamp in exising electrical fitting/fixture etc. as required. Each 8
16 Supplying fitting and fixing single wall mounted 20/22 watt LED type batten fitting complete with electronic driver and LED tube etc. directly on wall/ceiling including connection with 1.5 sq mm FR PVC insulater copper conductor and earthing the body etc. Each 40
17 Supplying fitting and fixing single 40/45 watt LED type Street light with die cast aluminium housing for ingres protection of IP65 and complete with all accessories etc. on pole/building including connection with 1.5 sq mm FR PVC insulator copper conductor and earthing the body etc. Each 6
S.H-III FITTINGS AND ACCESSORIES (FANS)
18 Supply and Installation of 400mm,230V AC wall/cabin fan including fixing the bracket, making connection , testing ,commissioning etc as required. Each 1
19 Supplying and Installation of regular/standard model ceiling fan of 1200mm sweep including wiring of down rods of standard length (up to 30cm) with 1.5 sq mm FRPVC Insulated copper conductoer cable as required. Each 4
S.H-III ; BOARD & D.B' S
20 S/F TCP MCB DB: Supplying and fixing following way, three pole and neutral, sheet steel,MCB distribution board ,415
(a) 4 Way (4+12) Double door, horizontal type Each 1
(b) 12 Way Double door SPN DB Each 1
21 S/F 'C' Series SP MCB: supplying and fixing 5 amps to 32 amps rating , 240 volts c series miniature circuit breaker
(a) single pole Each 24
22 S/F SPN RCCB: Supplying and fixing following rating,double pole,(single phase and neutral) 240 volts residual current circuit breaker (RCCB) having a sensitivity current upto 300 milliampere in the existing MCB DB complete with 63 amps Each 1
23 S/F TPN RCCB Supplying and fixing following rating, four pole (three phase and neutal) 415 volts residual current.
(a) 63 amps Each 1
S.H-IV:- EARTHING, CABLE AND PANEL WORK
24 Providing and laying earthing connection from earth electrode with 6 SWG dia G.I wire in 15mm dia GI Pipe earh electrode as required, all complete as per specification and direction of E/I. Meter 30
25 Earthing with GI earth pipe 4.5 mtr long, 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. Each 6
26 Earthing with G.I earth plate 600mm x 600mm x 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe of 2.7 meter lomg etc, with charcoal/coke salt as required. Each 2
27 Supplying and fixing 25x5mm G.I. strip in 40mm dia G.I. pipe from earth electrode all complete as per specification and direction of E/I. Meter 12
28 Supplying and laying following sizes and core PVC /XLPE insulated PVC sheathed, Heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforms to IS:1554, PART-1)
(b) 50 sq. mm , 3.5 core Meter 100
29 supplying & fixing panel mounted 4 pole on load change over switch 100A inside the existing cubicle panel board, including drilling holes in cubicle panel, including connections etc. as required Each 1
30 supplying & fixing wall/ floor mounted cubicle panel board, fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector including busbar chamber, insulator and painting etc. as required (but without busbar) Sq. ft. 12
31 Providing and fixing following rating and capacity four pole MCCB in existing panel board, including drilling holes in cubicle panel, making connections etc. as required
(c) 100A 30KA Each 1
32 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty complete with, INDICATOR LIGHT, VOLT AMMETER METER, all accessories including connections, earthing the body etc. as required.
(b) 200 amps Each 1
33 S/F TPN: Supplying and fixing following rating, four pole MCB, (three phase and neutral) 415 volts, in the existing MCB DB complete with connections, testing and commissioning etc. as required.
34 S/F TPN isolator: Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, in the existing MCB DB complete with connections, testing and commissioning etc. as required.
(a) 100A Each 2
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Price_Schedule.xlsx
xlsx • 0.08 MB
Vol III Attachment-26 Declaration regarding events encountered pursuant to ITB Clause 2-1.docx
docx • 0.03 MB
Vol III First Envelope and Bid Forms - Copy.xlsx
xlsx • 0.75 MB
Scope of Work.pdf
pdf • 0.02 MB
Vol II A BOQ.xlsx
xlsx • 0.02 MB
Vol II B SFQP.pdf
pdf • 2.22 MB
Vol 01 invitation for bids (IFB)SECTION I.doc
doc • 0.17 MB
Vol 05 SCC Sec-5.docx
docx • 0.07 MB
Vol 1 03D ANNEX-C (BDS) Sample E-stamp paper.pdf
pdf • 0.08 MB
Vol 1 03E ANNEX-E(BDS)-Undertaking for Authenticity.doc
doc • 0.05 MB
Vol 1 04 Conditions of Contract Civil Works.pdf
pdf • 0.39 MB
Vol 1 03A Annexure A(BDS) QR.doc
doc • 0.05 MB
Vol I 02 SEC ii ITB SSTE S&I R4-DCB-SRM -signed.pdf
pdf • 0.46 MB
Vol I 04A GCC Civil Amendments I - X.pdf
pdf • 3.64 MB
Vol I Annex B(BDS).pdf
pdf • 0.50 MB
Vol I annexure D(BDS).docx
docx • 0.02 MB
Vol I safety provisions_0001.pdf
pdf • 1.22 MB
Vol03 Sec-III BDS.doc
doc • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .