SPECIAL REPAIR TO BUILDING No T-43 AND PROVN OF WATER TANK WITH CONNECTED ITEMS AT MIL STN AIZAWL UNDER GE SILCHAR

Amount

PART-I (B/R WORKS) Excavating over areas, n exc. 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, as in soft/loose soil complete all as specified & directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed.

M & L for Loose filling with broken stone aggregates of gauge 40 to 80 mm complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed.

Material and Labour for broken stone or boulders hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, etc complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 sqm each with shutters (without taking off shutters from frame) complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down of GI pipe 20mm bore including all fittings complete all as specified and directed.

Taking down of GI pipe 15mm bore including all fittings complete all as specified and directed.

Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness as in roof coverings, chajja, wall clading and the like complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation oards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and directed

Demolition of reinforced cement concerete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Material and labour for PCC 1:4:8 type D- 2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in alternate panels and joints filled with bituminous 1 part and 3 part of sand complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, holdfast blocks, coping, lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching and similar work including necessary form work complete all as specified and directed.

Material and Labour for 100mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base of floor complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 using 40 mm graded aggregate in surface channel and drain including formwork, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for Reinforced cement concrete Design mix (M-25) using 20 mm graded aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate as in Chajjas complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.50 mtr span complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, etc complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks in PCC 1:3:6 type C-1 , exc. 10 cm of in width incl form work and setting in cement mortar CM 1: 6 complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks in PCC 1:3:6 type C-1 , 10 cm of in width incl form work and setting in cement mortar CM 1: 4 complete all as specified and directed.

Material and labour for formwork to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Material and labour for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for Formwork to chullah hoods, cha jjas, troughs and similar items in cluding edges for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to sides of Columns, pillars, piers, posts and struts for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.

All as per item No. 41 above but 6mm to 8 mm dia complete all as specified and directed

All as per item No. 41 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for filling of stone aggregate 6 mm grading around weep holes of retaining wall complete all as specified and directed

M&L for filling of stone aggregate 12 mm grading around weep holes of retaining wall complete all as specified and directed

M&L for Hand packing with broken bricks (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed

Material and labour for rendering 15 mm thick in cement mortar(1:3) on brick wall or concrete surfaces finished the surfaces even and smooth without mixed with water proofing compound as per manufacturer's instructions complete all as specified & directed. Note : WPC shall not be measured and paid separately.

Material and labour for rendering 10 mm thick in cement mortar(1:3) on brick wall or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar(1:6) on brick wall or concrete surfaces finished the surfaces even and fair complete all as specified and directed.

M&L for Rendering 10mm thick in t CM 1:4 on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed.

M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] mixed with water proofing compound as per manufacturer's instructions in 2nd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. Note : WPC shall not be measured and paid separately.

Supply only of Integral waterproofing compound complete all as specified & directed.

M& L for providing 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) as in floor finished even & fair complete all as specified and directed.

M& L for providing 50 mm thick plain cement concrete 1:2:4 type B-2 (using 40mm graded stone agg) as in floor finished even & smooth without using extra cement complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles over & incl 15 mm thck screed layer in CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles (300x200) 7mm thick on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in coloured cement or pigment to match colour tiles over & incl 10 mm thck screed layer in CM 1:4 complete all as specified and directed.

M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding edges including 15 mm thick screed bed or bedding layers in cement mortar 1:4 including brushing with neat cement slurry with 3.00 Kg of cement per sqm complete all as specified and directed.

Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-210 complete all as specified and directed.

S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each not exc 10 cm long & dia 11 to 15mm necessary fitting complete all as specified and directed.

S&F for Pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work , conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe.410 W.( Gde-E-250) complete all as specified and directed.

S&F for 1 mm thick , 150 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edge complete all as specified and directed.

S&F plates (plain or chequered) Fe-290 (Gde E165) cut to required size, forming holes to receive holding down bolts and welded to tubular/square hallow section trues at both ends complete all as specified and directed.

Material and labour for pre-painted designer false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mm x 600 mm with main runner 38mm x 24mm and wall angle 24mm x 24mm using 4mm thick High Pressure Non Asbestos Fibre Cement prepainted decorative board (E-Board Classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c the last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall, Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to fom 600mm x 600mm grid and painted with two coats of acrylic emulsion paint of approved shed/make over a coat of cement primer before installing it on the grid complete all as specified and directed. Make:- Everest Industries Ltd or equivalent as per IS-14862.

S&F 2nd class hard wood, 30 mm thick, glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided in to squares, with plain chamfered or rounded, mitered and rebated sash bars sizes of members of shutters as specified in SSR part I, Section 8, Clause No 8.20 (b) and fitted to chowkat etc complete all as specifed and directed

Supply and fix Pressed steel frames for doors of size 165 mm x 60 mm made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc supplied and fixed complete all as specified.

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification .

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specifed and directed

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specifed and directed

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specifed and directed

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty or fixed with wooden/PVC beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges medium weight with stainless steel screws complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed complete all as specified and directed.

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Soap dish, vitreous China white, ap proximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F chromium plate brass Tubular towel rail, 20mm dia, D type, 60cm long between flange fixed in repairs complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles cast type anodized complete all as specified and directed.

S&F for 20mm bore tube medium grade galvanized with all fitting and fixed to wall, ceiling or laid in floor or trenches complete all as specified and directed.

Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16 mm outer dia CPVC Brass Elbow fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16 mm outer dia CPVC Brass Tee fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/ MBTA) fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16 mm outer dia CPVC Female Brass Threaded Adaptor (FTA/ FBTA ) fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16 mm outer dia CPVC UNION fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supply and fix Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F 15mm bore Bib taps chromium plated cast copper alloy, screwed down, fancy type, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F as in repair, stop valve, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions etc complete all as specified and directed.

S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 110mm bore PVC pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed, in any length, fixed to walls with suitable size of MS clamp & nuts -bolts of suitable size complete all as specified & directed

Supply and fix 110 mm bore PVC (SWR) reducer complete all as specified & directed.

Supply and fix 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified & directed

Supply and fix 110 mm PVC (SWR) S trap including jointing with solvent cement complete all as specified & directed.

Supply and fix 75 mm bore PVC (SWR) vent cowl complete all as specified.

Supply and fix 110mm PVC (SWR) WC connector with lip ring complete all as specified & directed

Supply and fix PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified & directed

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed

Supply and fix 32 mm bore Low density polyet hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified & directed

Supply and fix, as in repair, vitreous china wash basin, wall hung basin with fixing accessories of size 560 x 430 x195 mm full padestal type white , excluding taps, waste chain, plug and porcelain stopper , cutting for and pinning in complete all as specified and directed. Make Jaquar Cat part No CNS-WHT-303 & CNS-WHT-811 or equivalent make as approved by GE

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix, vitreous china squatting pan of Orrisa pattern size 630 mm x 450 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and lime concrete bedding connection making good to floor all as specified.

Supply and fix, as in repair for vitreous china wash down water closet pan of padestel pattern white with P or S trap including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed

Supply and fix PVC valveless, syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting and flush pipe complete all as specified & directed

Supply and fix for PVC water bar 150 mm wide for construction joint complete all as specified & directed

Supply and fixing GI pipe 100 mm bore medium grade ISI marked with new GI fitting laid in trenches/wall/floor or any location complete all as specified and directed.

Supply and fixing GI pipe 50 mm bore medium grade ISI marked with new GI fitting laid in trenches/wall/floor or any location complete all as specified and directed.

Supply and fixing GI pipe 25 mm bore medium grade ISI marked with new GI fitting laid in trenches/wall/floor or any location complete all as specified and directed.

Supply and fix 100 mm bore Cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unsv complete all as specified and directed.

Supply and fix 50 mm bore Gun metal Gate vlave Gun metal Gate valve ISI marked heavy duty with iron wheel head screwed both ends for GI pipe and supply and fixing complete all as specified and directed.

Supply and fix 25 mm bore Gun metal Gate vlave Gun metal Gate valve ISI marked heavy duty with iron wheel head screwed both ends for GI pipe and supply and fixing complete all as specified and directed.

Supply and fix 25 mm bore PTMT ball valve high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Material and labour for construction of valve pit of brick masonry of size 900 x900 x 900mm internal dimension complete with Angle Iron, 3.15mm thick MS sheet cover and locking arrangement including excavation and earth work and P.C.C 1:3:6 type with provision of two coat of synthetic enamal paint over one coat of red oxide primer, complete all as specified and directed.

Material and labour for construction of valve pit of brick masonry of size 600 x 600 x 600mm internal dimension complete with Angle Iron, 3.15mm thick MS sheet cover and locking arrangement including excavation and earth work and P.C.C 1:3:6 type with provision of two coat of synthetic enamal paint over one coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm in width or girth & applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for two coats of synthetic enamel painting to wooden surfaces over 10 cm width and girth over a coat of pink primer incl preparation of new or untreated wooden surface etc complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of distemper oil emulsion over one coat of primer over on new or previously untreated plastered surfaces of walls, including preparation, to make the surface even and smooth,complete all as specified and directed.

M&L for preparation of new plastered surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm,complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over one coat of alkali resistance primer as per manufacturer's instructions complete all as specified and directed.

PART-II (E/M WORKS) Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc complete all as specified and directed.

Dismantling of old unserviceable main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall complete all as specified and directed.

Dismantling of old unserviceable house service bracket any shape & size complete all as specified and directed.

M&L for Point wiring using 1100 volt grade FRLSH PVC insulated unsheathed multi strand copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand 1100 volt grade copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.

All as per srl item No. 131 above but point wiring for one socket outet point 5 amps on the independent board.

All as per srl item No. 131 above but point wiring for one socket outet point 5 amps on the same board.

All as per item No. 131 here in before but for but for one three pin 15 Amps socket outlet on independent board with 1100V grade PVC insulated and unsheathed 4 Sqmm multi strand FRLS copper conductor cable and PVC insulated and unsheathed copper conductor 4 Sqmm , 1100 volt grade as earth continuity conductor drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.

S&F lamp holder angular/batten/ Pendent insulated body with back plate for batten fittings with 9 watt LED lamp complete all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

Supply and fix Socket 6A - 5/6 pin combined 2 module complete with cover plate all as specified.

Supply and fix Fan step regulator, 120W - 2 module complete with cover plate all as specified.

Supply and fix Socket 6A/16A - 5/6 pin combined 2 module complete with cover plate all as specified.

S&F in Bell ding dong type 6 amps 240 volts complete all as specified and directed.

S&F modular blank plate 01 module complete all as specified and directed.

S&F modular Metal flush box alongwith 1 module White cover plate with frame,complete all as specified and directed.

S&F modular Metal flush box alongwith 3 module White cover plate with frame, complete all as specified and directed.

S&F modular Metal flush box alongwith 4 module White cover plate with frame, complete all as specified and directed.

S&F modular Metal flush box alongwith 6 module White cover plate with frame,( Vertical / horizontal) complete all as specified and directed.

Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Havells Cat No. LHEWEBP7IN1W020 or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves

S&F LED Bldg Security light fitting of 25 watt fixed on & incl MS bracket, made out of 40 mm bore medium grade GI pipe 1.5 mtr long with MS clamps and nut bolts of suitable size complete all as specified and directed. Make:- Havells Cat No. ENDURAPEARLSL25WLED 757SASYTOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/ M/S Jaquar & Company Pvt Ltd/Crompton Greaves

S&F mirror light LED linear fitting including Tube rod 7 watts and fixed on wall surface with PVC square box for self aligning and connected with 3 core flexible FRLS copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder with and incl LED lamp/bulb ball type of 10Watt connecting with three core flexible copper conductor cable of suitable size complete all as specfied and directed. Make : Havells Cat Part No. HEXAFIT10WLED857SSYMBOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves

Supply and fix sheet metal enclosure powder coated tripple phase and neutral DB for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix MCB TPN 63 Amps 415 Volts 'C' series complete all as specified and directed.

Supply and fix MCB SPN 32 Amps 240 Volts 'C' series complete all as specified and directed.

Supply and fix MCB SP 5 to 32 Amps 240 Volts 'C' series complete all as specified and directed.

Supply and spread dry sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note : Thickness of sand cushion after punning down will be measured and paid.

Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.

Supply and laying GI tube light grade 40mm bore with fitting laid in trenches of for road crossing for protection of LT underground cables complete all as specified and directed.

Supply and fix in repair Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC complete all as specified and as directed. MAKE:- BAJAJ , Speedster X BBD 1200 mm Ceramic White CF 2690 2410 or equivalent.

Supply and fix in repair plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :- BAJAJ MAXIMA DX 5 BLADE (250 MM ) or equivalent.

Supply and laying connecting and testing XLPE insulated PVC sheathed armoured LT electric power UG cable (heavy duty with stranded aluminium conductor) of size 10 sqmm 2 core,1100 volts grade, conforming to IS 7098 (Part-II) laid thorught duct/pipe in trenches etc with cable glands & suitable size of aluminium lugs complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed.

M/S MOLOY KUMAR DEY

m/s builders and suppliers

M/S TAPAN KUMAR RAY

MS AFTAB LASKAR