Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC NEAR KRIPAN GATE PO BINNAGURI DIST JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L1 | Accepted-AOC Lowest quoted amount overall reasonable | |
| 2 | L2₹13.9 L+₹1.8 L (14.6%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest hence rejected | |
| 3 | L3₹14.9 L+₹2.7 L (22.6%)Rejected-AOC | L3 | Rejected-AOC 3rd lowest hence rejected | |
| 4 | L4₹15.3 L+₹3.2 L (26.1%)Rejected-AOC | L4 | Rejected-AOC 4th lowest hence rejected | |
| 5 | L5₹15.9 L+₹3.8 L (31.0%)Rejected-AOC | L5 | Rejected-AOC 5th lowest hence rejected |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
18 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Belgaum
Garrison Engineer Belgaum,Laxmi tek, camp, belgaum
WELCOME MAINT TO OFFICERS MARRIED ACCN AND EXTERNAL FINISHES TO ERTAIN MD ACCN AT VIRK ENCLAVE AND HARSHAN ENCLAVE I AND II UNDER GE BELGAUM
2023_MES_590435_1
8921/E8
Open Tender
Civil Works
Item Rate
180 days
bELGAUM
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Belgaum
₹36,000
Yes
15 Jun 2023
20 Apr 2023
20 May 2023
20 Apr 2023
18 May 2023
4 May 2023
Amount
Taking down cement or cement lime plaster on brick or stone walls, ceilings, etc. including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.
Material and labour for 10mm thick Rendering in CM 1:6 on fair faces of PCC block or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on brick work/PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.
Material and labour for Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished fair and even without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound . Note : Make :Impermo/Roff/Cico
Material and labour for Preparation of new surfaces of ceiling and applying two coats of oil bound distemper (Acrylic distemper washable), any colour over a coat of chalk whitening primer primer complete all as specified and as directed.
Material and labour for Preparation of new surfaces of wall . and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of chalk whitening primer over 1mm thick layer of wall care putty complete all as specified and as directed.
Material and labour for Preparation of new surfaces of wall and applying two coats of cement based paint any colour over a coat of primer complete. all as specified and as directed.
Material and labour for Preparation of newly plastered or un plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for Preparation of old decorated surfaces of wall etc by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and washing, rubbing down and stopping and applying one coat of white wash complete. all as specified and as directed.
Description all as per item no :10 here in before but on ceiling surfaces
Description all as per item no :10 here in before but one coat of oil emulsion distember on wall surface (White or Tinted)
Material and labour for Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Description all as per item no :13 here in before but not exceeding 10 cm width or girth
Material and labour for Preparation of old painted steel and iron based surfacesurface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Description all as per item no :15 here in before but not exceeding 10 cm width or girth
Material and labour for complete removal of existing treatment and necessary preparation of surfaces of walls, pillasters, cornices, etc. by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and washing, rubbing down and stopping and applying two coats of white wash complete. all as specified and as directed.
Material and labour for complete removal of existing treatment and necessary preparation of surfaces of walls, pillasters, cornices, etc. by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots etc and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of primer over 1mm thick layer of wall care putty complete all as specified and as directed.
Material and labour for Preparation of old decorated surfaces of wall etc and applying one coat of cement based paint complete. all as specified and as directed.
Material and labour for Plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate, 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc.including necessary form work and Demolition of cement concrete in ground floors n exc 15cm thick unreinforced (below or above ground level) and removal of debris complete all as specified and as directed. .
Material and labour for complete removal of existing treatment and necessary preparation of surfaces of wall, pillasters, cornices, etc. by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots etc and applyingone coat of exterior emulsion paint complete all as specified and as directed. Note :Make of exterior emulsion paint :Asian Paints : Brand :Apex
Material and labour for complete removal of existing treatment and necessary preparation of surfaces of walls, pillasters, cornices, etc. by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots etcand applying two coats of exterior emulsion paint complete all as specified and as directed. Note :Make of exterior emulsion paint :Asian Paints : Brand :Apex
Material and labour for Repair of disturbed/broken brick work in CM 1 :6 including filling of narrow intertices with PCC 1 :2 :4 type B 0 (using 12.50 mm graded aggregate ) after and including removal/root out of trees,, plants ,trunks ,grasses and creeps etc from roof or wall and finished the surface with 15 mm thick plaster in CM 1:6 complete all as specified and as directed .
Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.
Material and labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish
Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish
Taking down eaves gutter pipes, rain water pipes (of any size or pattern) including fittings, head shoes, bends, swan neck etc and taken as credit complete all as specified and as directed
Supply and fix PVC (SWR) eaves gutter 150mm dia trapezodial shape Gde-I fixed with MS clamps complete all as specified and as directed.Note : Make : Finolex/Supreme/Prince
Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince
Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince
Supply and fix in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.
Material and labour for Premium quality non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match with the floor including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed. Note :Make of Tile :HR Johnson/Khajaria/Naveen
Material and labour for Premium quality non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 completeall as specified and as directed.Note :Make of Tile :HR Johnson/Khajaria/Naveen
Material and labour for Vitrified Coloured Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6completeall as specified and as directed. Note : Make of Tile :HR Johnson/Khajaria/Naveen
Material and labour for Premium glazed ceramic coloured tiles of size 200x300x 5.5mm/350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat for dado, skirting etc. complete all as specified and as directed.Note : Make of Tile :HR Johnson/Khajaria/Naveen
Dismantling boarding of any description fixed in any position with nails and old unserviceable board of any description taken as credit complete. all as specified and as directed
Supply and fix in repairs 18/19mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB',on one side and with decorative veneer on other face fixed with screws to timber frame work complete all as specified and as directed.. Note :Make :Kitply/Century Ply Wood/ Novopan
Supply and fix in repair 15mm dia Bib taps, cast copper alloy Fancy type CP brass,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.Note : Make : SEICO/Waterman /GEM
Supply and fix in repair 15mm dia Stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed Note : Make : SEICO/Waterman /GEM
Supply and fix in repair Vitreous china water closet, Pedestal type, white including flush pipe, seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc .complete all as specified and as directed. MAKE ; HINDWARE/CERA/MARC
Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed.
Supply and fix in repairs 15 mm bore dia brass CP Mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.Note : Make Jaguar/Cera/Johnson
Supply and fix in repairs Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe, fixed in repairs completeall as specified and as directed. Note :Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039
Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs complete all as specified and as directed. Note :Make: Jaguar /Hindware/Marc
Supply and fix in repairs Vitreous china wash basin,white,size 550x400mm,including CI brackets , with PVC waste pipe and waste fittings and cutting for and pinning in ends of brackets or erecting stands etc complete all as specified and as directed. MAKE ; HINDWARE/CERA/MARC
Supply and fix in repairs Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Note :.Make : SEICO/Waterman /GEM
Supply and fix in repairs brass chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed . Note : Make :Cat No.ACN 1151N of JAQUAR or equivalent model in Johnson/ Cera
Supply and fix in repairs Soap dish, vitreous china , white of size 160mmx160mmx 90 mm fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) completeall as specified and as directed..Note :Make: Jaguar /Hindware/Marc.
Supply and fix in repair Health faucet , brass chromium plated suitable for 15 mm dia pipe with1.00 metre long flexiblePVC tube and ABS wall hook complete all as specified and as directed. Note :Make: JAQUAR/ JOHNSON/ CERA
Supply and fix in repairs Tubular towel rod 600 mm , brass chromium plated, fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed. Note :Make: Cat No. CAN-CHR-1111N of Jaguar or equivalent model in JOHNSON/ ESS ESS.
Supply and fix in repairs 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc compete all as specified and as directed. Note :Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS.
Supply and fix in repairs seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device completeall as specified and as directed. Note :Make :Parryware/CERA/Johnson
Supply and fix in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified.Note :Make :Nirali/Joyna/Commander
Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Make :M/S Prayag/M/s Shakthi Industries
Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries
Supply and fix in repairs 3 way mixer tap for mixing hot and cold water fancy type brass chromium plated screwed down for 15mm bore GI pipe complete all as specified and as directed Note:Make :Jaquar Wall Mixer CON-273KNUPR - CON-273KNUPR or equivalent model in Hindware/MARC
Material and labour for Point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable drawn through and including PVC casing and capping medium grade of size 20/25 mmwith all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches,sockets etc concealed on wall . for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware
All as described in item No. 60 here in before but for one fan/Exhaust Fan point controlled by one switch and regulator.
All as described in item No. 60 here in before but for one call bell point controlled by bell push
All as described in item No.60 here in before but for one 3 pin socket outlet , 5 amps on the same board with other switches with cables 1.50 sqmm size
All as described in item No.60 here in before but for one 05 Amps , 03 pin socket outlet on independent board.
All as described in item No.60 here in before but for one light point controlled by two two way switches.
All as per item No 60 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core through PVC casing capping medium grade of size 25/20 mm, etc fixed on wall/ceiling of suitable size and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .
Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 2.50 Sq mm drawn through and including PVC casing and capping medium grade of size 20/25 mm with all necessary fitttings and Provn of one run of 2.50 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 2.50sqmm and one run of 2.50 sqmm and one PVC casing and capping will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware
Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 4.00 Sq mm drawn through and including PVC casing and capping medium grade of size 20/25 mm with all necessary fitttings and Provn of one run of 4.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 4.00sqmm and one run of 4.00 sqmm and one PVC casing and capping will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware
Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through and including PVC casing and capping medium grade of size 20/25 mm with all necessary fitttings and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC casing and capping will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware
Supply and fix in repairs Switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit complete all as specified and as directed. Make : Anchor/Legrand/Indo Asian
Supply and fix in repairs Socket outlet 5 Amps,3/ 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian
Supply and fix in repairs Socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian
Supply and fix in repairs Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian
Supply and fix in repairs Electronic type fan regulator 230 V , 120 watt step type, socket type,complete all as specified and as directed . Make : Anchor/Legrand/Rider
Supply and fix in repairs Switch piano flush type, 5 Amps, Single pole, two way 230 V AC confirming to IS:3854and ISI marked complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian
Supply and fix in repairs bell push 5 Amps 230 V, AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian
Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells)
Supply and fix in repairs PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian
Supply and fix in repairs Call bell ding dong type 230 V AC circuit complete all as specified and as directed .. Make : Anchor/Legrand/Indo Asian
Material and labour for Point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area drawn through in and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system and provision of one run of green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular metal surface box fixing in wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for (a) one light point controled by one 1 way switch .NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware
All as per item no : 80 here in before One fan/Exhaust point point controlled by one switch
All as per item no : 80here in before One call bell point controlled by bell push.
All as per item no : 80 here in before one 3 pin socket outlet, on the same bord socket 5 Amps point.with other switches with cable 1.5 sqmm
All as per item no : 80 here in beforeone 3 pin socket outlet, for independent socket 5 Amps point.
All as per item no : 80 here in before one light point controlled by two, two way switches.
All as per above item No : 80 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable through and including concealed non metallic rigid PVC conduit medium grade of size 25/20 mm, etc fixed in wall/ceiling of suitable size and one run of 2.5 sqmm FRLS PVC insulated unsheathed multistranded copper cable of upto earth dolly earthing for 15 Amps socket outlet independent.
Supply and fix in repairs Modular switch 1 way 6 Amps 1 module 230 Volts AC complete all as specified and directed. Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined 2 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined 2 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular switch 1 way 16Amps 1 module 230 Volts AC complete all as specified and directed. complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and as directed. Make : Anchor/Legrand/Rider
Supply and fix in repairs Modular switch 2 ways 6 Amps 1 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular bell push flush type 6 Amps 1 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular white cover plate with frame and plastic boxes for 8 module 230 Volts AC complete all as specified and as directed.Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular white cover plate with frame and plastic boxes for 6 module 230 Volts AC complete all as specified and as directed.Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular white cover plate with frame and plastic boxes for 4 module 230 Volts AC complete all as specified and as directed.Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular metal flush box with 3 module 230 Volts AC complete all as specified and as directed.Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular metal flush box with 4 module 230 Volts AC complete all as specified and as directed.Make : Anchor (Roma) /Legrand/Crab Tree
Supply and fix in repairs Modular metal flush box with 6 module 230 Volts AC complete all as specified and as directed.Make : Anchor (Roma) /Legrand/Crab Tree
Supply and draw in replacement with Three Run of single core FRLS PVC insulated unsheathed electric cable 1.5 Sqmm copper wire in existing concealed conduit to made serviceable light point/fan/socket point as power earth and neutral complete and including taking out old aluminium / copper burnt wires complete all as specified and as directed. Note : (i) Two run of single core PVC cable and one run of earth conductor shall be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel
Supply and draw in replacement with Two Run of single coreFRLS PVC insulated unsheathed electric cable 2.5 Sqmm copper wire for phase and neutral and one run of single coreFRLS PVC insulated unsheathed electric cable 2.5 Sqmm copper wire for earth wire in existing concealed conduit to made serviceable light point/fan/socket point as power earth and neutral complete and including taking out old aluminium / copper burnt wires complete all as specified and as directed.( Note : (i) Two run of single core PVC cable and one run of earth conductor shall be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel
Material and labour for Submain wiring complete with 1100volt grade FRLS PVC insulated unsheathed multistranded cable with 1100volt grade 02 runs of 04 sqmm copper conductor cable confirming to IS 694 drawn through and including rigid non metallic PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling including provision of 01 run of 4.0 sqmm FRLS PVC unsheathed copper conductor and Connected to earth dolly complete all as specified and as directed. Note :-(i) 02 run of 04 sqmm and 01 run of 4.0 sqm including 01 run of PVC CONDUIT will be measured as one length (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware
Material and labour for Submain wiring complete with 1100volt grade FRLS PVC insulated unsheathed multistranded cable with 1100volt grade 02 run of 06 sqmm copper conductor cable confirming to IS 694 drawn through and including rigid non metallic PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling including provision of 01 run of 6.0 sqmm FRLS PVC unsheathed copper conductor and Connected to earth dolly complete all as specified and as directed. Note :-(i) 02 run of 06 sqmm and 01 run of 6.0 sqm including 01 run of PVC CONDUIT will be measured as one length (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware
Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB/MCB 100/ 63 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoing including old unserviceable DB of any description and taken as credit complete all as specified and as directed. Note : Make : Indo Asian/L&T/Legrand
Supply and fix Factory made epoxy powder coated distribution board TPN 4 ways 415 Volt grade (TPN MCB DB ) with double door (IP-43 protection) and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar ,neutral bar ,strande DIN rail ,Earth bar and cable ties for cable management ,top and bottom removable gland plates with knockouts including old.unserviceable DB of any description and taken as credit complete all as specified Note : Make : Indo Asian/L&T/Legrand
Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings including old.unserviceable DB of any description and taken as credit complete all as specified and as directed . Note :Make : Siemen/ABB/L&T
Supply and fixi Factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 6 SP MCBs as outgoings including taking down old.unserviceable DB of any description and taken as credit complete all as specified and as directed. Note : Make : Indo Asian/L&T/Legrand
Supply and fix Factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 2 SP MCBs as outgoings including old.unserviceable DB of any description and taken as credit complete all as specified and as directed. Note : Make : Indo Asian/L&T/Legrand
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity including taking down old one and taken as credit complete all as specified and as directed. Note : Make : Indo Asian/L&T/Legrand
Supply and fix in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed.Make : Indo Asian/L&T/Legrand
Supply and fix in repair MCB TPN 'C' series 40 to 100 Amps, 415 volts, 50 Hz, 10 KA complete all as specified and directed.Make : Indo Asian/L&T/Legrand
Supply and fix In repairs 'C' series ' 40-63 Amps Double pole MCB complete all as specified and directed.Make : Indo Asian/L&T/Legrand
Supply and fix in repairs MCB SP 240 Volt of capacity 6 to32 Amps ‘C’ series complete all as specified and as directed.Make : Indo Asian/L&T/Legrand
Supply and fix in repair lamp holder, insulated body,with back plate for batten fitting including Led lamp 9 watt -01 No complete all as specified and as directed.Note :Make of LED Lamp :Philips/Wipro/CG
Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. complete with all accessories internally pre wired including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and as directed. Make: Philips cat part no :EnduraLED Bulkhead WT202W LED10S CW PSU S3 PC or Equivalent in M/S Wipro/CG
Supply and fix in repairs round / square shaped 6 /9 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Make: M/S Wipro SlimrisLED CRDL14R005HP60*/CG/Philips
Supply and fix in repairs round / square shaped 12/15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Make: M/S Wipro SlimrisLED CRDL14R010HP60*/CG/Philips
Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Note :Make: Philips cat part no :BN 021C LED20S PSU CDL or Equivalent in M/S Wipro/CG
Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Note : Make : Philips cat part no : BN 021 LED10S- 6500/4000 PSU GR S1 or in of M/S Wipro/CG
Supply and fix in repairs LED light fitting mirror type with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Make: Philips/M/S Wipro/CG
Supply and fix in repairs LED bedside light 6 watts grey/metal synthetic incl connection with suitable size copper wire & fixing the fitting on suitable size of PVC / wooden round block complete all as specified and as directed.Make: Philips/ M/S Wipro/CG
Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.Note : Make : Philips cat part no : RC370B LED30S-6500 or Equivalent in M/S Wipro/CG
Supply and fix LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed..Note : Note : Make :Philips BRP020 LED HP/CW 240V 25W equivalent in M/S Wipro/CG
Supply and fix Wall mounting fans 230 V single phase 400 mm sweep , heavy duty with all accessories fixed to wall with all necessary brackets ,bolts nuts etc including testing and making good disturbed surfaces complete all as specified and as directed . Note :Make:- Almonard/Bajaj/Khaitan
Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.
Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete Note : Make :Philips/WIPRO/CG
Supply and fixing Bollard light LED type 9 watt decorative Led extruded aluminium bollard with integrated driver with decorative cylindrical / rectangular shape 230 watt volts AC outdoor type with indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed Note : Make :Philips/WIPRO/CG
SHRI.H.R.PATIL
M/S MAHADEV M PATIL
M/s. KIRAN M CHOUGULE
M/s B C CHOUGULE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .