ADDITION ALTERATION TO BUILDING NO T 68 SISTER QUARTER OF 134 I WKSP EME SIG GP AT DUNKIRK LINES AND REPLACEMENT OF EXHAUST FAN GEYSERS AND ELECTRIC METERS AGAINST BER UNDER GE CENTRAL KIRKEE

Amount

Dismantling of single layer Mangalore pattern or similar tiles in roof coverings at any height complete all as specified and as directed.

Dismantling Mangalore pattern tiles, inter locking at side joints laid/ beded in lime or cement mortar in roof complete all as specified and as directed.

Dismantling at any height battens for tiles, shingle etc of any size including tiling fillets spacing exc. 15cm complete all as specified and as directed.

Dismantling timber in scantling 40 sq.cm and over in section in any position and any description .

Dismantling at any height timber as in fillets, rail , posts rafter , purlins etc under 40 sq.cm in section in repair complete all as directed.

Material and labour Plain Cement Concrete, type B-1, (1:2:4) using 20 mm graded crushed stone aggregate as in coping / benching / bed block and the like including necessary form work complete all as specified and as directed.

Supply and fix rolled mild steel sections of any type as in roof trusses (framed), trussed verticle members of sheds, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed with angle cleats or other connecting plates conforming to Fe 410-W quality B complete as in roof truss work fixing on walls complete all as specified as directed.

Supply and fix rolled mild steel sections of any type as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe 410-W quality B as in roof truss work complete all as specified as directed.

Supply and fix mild steel screw bolts, machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 5 to 10mm and length exc. 5cm and n.exc. 10cm complete all as specified as directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over one coat of red oxide primer complete all as specified as directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of mangalore tiles pattern/colour, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws with one corrugation side lap, bent to shape complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering as in ridges / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and as directed.

Supply and fix Gypsum reinforced boards 600x600x8-13mm thick Sierre pattern (Make - Armstrong) for ceiling,using hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white, the frame work shall comprise of main runner made out from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres, hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc, the last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm from adjacent center to form 1200x600mm moulds cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instructions and finishing the surface by applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site.

Taking down chowkats and frame area exc. 1.5 Sqm but n.exc. 4.00 sqm each including shutters with out taking off shutter from the frame and removing from site complete all as specified and as directed.

Taking down shutters of any description area exc. 1.00 sqm but n.exc. 2.00 sqm each and removing form site complete all as specified and as directed.

Supply and fix pressed steel frames made out of 1.25 mm thick MS sheet of size 125x60mm for doors, ventilator with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, including material and labour for providing PCC (1:2:4), type B1(using 20mm graded stone aggregate to fill the frame & making good complete all as specified and as directed.

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type prelaminated on both sides complete all as specified and as directed.

Supply and fix 35 mm factory made shutters made out of second class hard wood plain framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and as directed

Supply and fix 35mm thick second class hard wood glazed or skeleton shutters, open rebated divided into square with plain chamfered or rounded mitred and rebated with out sash bar and prepared to receive gauze or glaze, size of members as per clause 8.20 (a) of SSR pt-1 complete all as specified and as directed.

Supply and fix 200mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fix 300 mm long aluminium anodised sliding door bolt plate type, not less than 12 mm dia with and including 6 Nos aluminiumbolts and nuts, 4 on bolt plate and 2 on staple plate length of bolt 300 mm welded to door shutter/frame all as directed by Engr-in-charge.

Supply and fix mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. fixed in floors complete all as specified and as directed.

Supply and fix factory made internal PVC door frame of size 50x47mm single rebated made out of extruded 5 mm wood grain printed PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube, the two vertical door profiles are to be reinforced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and directed.

Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix 100mm long stainless steel medium weight butt hinges for wooden/ PVC door shutters and frames fixed with bright screwes complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface to match with the existing surface complete all as specified and as directed by Engr-in-Charge.

Supply and fix for rolled mild steel as in frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Demolition at any height of brick /PCC block masonry built in cement mortar complete all as specified and as directed.

Material and labour for brick work with sub class 'B' brick straight or curved on plan built in cement mortar (1:6) complete all as specified and as directed.

Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of stone/ block masonry surfaces on walls in CM (1:4) mixed with and including WPC finished even and smooth complete all as specified and as directed. NOTE :-- Rate for WPC shall be deemed to be included in quoted rate.

Material and labour for rendering 20 mm thick on fair faces of unplastered surface of walls/brick/ block masonry surfaces in CM (1:6) finished even and smooth complete all as specified and as directed.

Material and labour preparation of new plastered surfaces of walls, applying two coats of oil bound distemper of approved tint over a coat of primer over neatly finished 3mm thick wall care putty on walls complete all as specified and as directed.

Material and labour preparation of old plastered wall surfaces and applying two coats of oil bound distemper approved tint over a coat of primer over neatly finished 3mm thick wall care putty on walls complete all as specified and as directed.

Material and labour for preparation of new decorated plastered or unplastered surfaces of wall, and applying two coats of cement base paint (white or tinted) over a coat of alkali reistant primer complete all as specified and as directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coats of cement base paint of approved tint over a coat of primer (white or tinted) complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises over a coat of primer over neatly finished 3mm thick wall care putty on walls complete all as specified and as directed.

Material and labour for 25 mm thick Plain Cement Concrete (1:2:4) type B-1 using 20mm crushed stone aggregate as in leveling course / sub base over a coat of primer over neatly finished 3mm thick wall care putty on walls complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles joint free, 7 to 8 mm thick (square or rectangular) area of each tile exc. 0.18 (600X600X7mm) Sqm but n.exc. 0.38 sqm, laid in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)

Supply and fix coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)

Material and labour Glazed ceramic colour tiles as in vertifical surface of walls 450x350x7mm thick with necessary borders etc et and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar (1:3),pattern as approved complete all as specified and as directed. MAKE :- Somany/Johnson/Kajaria

Material and labour for Machine cut cudappa stone slab 20-25mm thick as in steps, jambs, pillars, window- cills, cooking platforms, and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing, polishing and rounding to edges including demolition of existing cill/cooking platform complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

Material and labour for 100mm thick Plain Cement Concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub bases over rammed earth to raise the floor height complete all as specified and as directed.

Material and labour for 25mm thick crushed stone dust/sand filling under floors or in floor to raise the floor height including watering and consolidation complete all as directed.

Material and labour for hardcore of broken stones or boulders of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered, rolled/rammed to true surface to raise the floor height complete all as specified and as directed.

Material and labour 75 mm thick Plain Cement Concrete (1:3:6), type C2 using 40mm graded stone aggregate laid in panels, surfaces finished even and smooth without using extra cement as in plinth protection /path complete all as specified and as directed.

Taking up or down existing 15mm bore steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

Taking up or down existing 20mm bore steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

Supply and fix 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and as directed.

Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed. NOTE :- GI tubing as obtained from Sl Item No. 55 shall be reused.

Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed. NOTE :- GI tubing as obtained from Sl Item No. 56 shall be reused.

Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per CERA Cat No CURTIS or techno commercially equivalent makes specified in PS fixed as in repairs, complete all as specified and as directed.

Material and labour for PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs Bib taps, 15mm bore long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down,screwed for iron pipe or for brass ferrule all as per Prayag Cat No 8308 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix in repairs angle cock, 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butterfly handle screw down, screwed both ends for iron pipe or or brass ferrule all as per Prayag Cat No 8310 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and as directed.

Supply and fix (in repairs) Stop cock (concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bore of pipe all as per Prayag Cat No 8318/8320 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs chromium plated shower rose 100mm square with arm and flange including fixing to steel pipe complete all as per Prayag Cat Part No BS-30 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repair for stainless steel kitchen plate rack of size (24"X36"X10") three tier, ISI marked, (MAKE :- Prayag or equivalent) including all fittings all as specified and as directed by Engineer-in-charge.

Supply and fix, in repairs Kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket and connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed.

Material and labour for Viterious china wash basin white flat back size 540 x 395 x185mm mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings all as per ESSCO Cat No CMS-WHT-10381 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs 32 mm bore PVC waste pipe of approved make suitable for WHB, sink,urinals etc all as specified and as directed.

Supply and fix in repairs PVC floor trap, square type with CP grating with or without hole including provision of jointing to waste pipes in run lead, joint dia of outlet 75 mm, complete all as specified and as directed.

Supply and fix in repairs towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) complete all as specified and as directed.

Supply and fix in repairs Soap dish, brass chromium plated,all as per Cat Part No BA-45 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repairs Stainless steel fancy type curain rod 25 mm including SS brackets, decorative knobs,and including all necessary fittings such as rawl plug screws complete all as specified and as directed.

Supply and fix PVC (SWR) pipes, type 'B', single socketed in any length with rubber ring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified.

Supply and fix PVC (SWR) pipes, type 'B', single socketed in any length with rubber ring joints laid in trenches or in floors and wall 110mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix 110mm dia (bore of pipe) PVC bends, trype 'B' any radius, diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and as directed.

Supply and fix 75mm dia (bore of pipe) PVC bends, type 'B' any radius, diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and as directed.

Supply and fix in repairs 75mm/110mm bore PVC (SWR) vent cowl type 'B' complete all as specificed and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) vent cowl type 'B' complete all as specificed and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal type 'B' complete all as specificed and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal type 'B' complete all as specificed and as directed.

Dismantling of existing paver blocks of any size and any pattern, refixing the paver block in same postion after filling crush sand as cushion making good the surfaces complete all as specificed and as directed.

Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, fan/exhaust fan etc. removing materials to store for keeping in safe custody or for offering credit (credit for above items shall be made as per conditions separately ) and making good disturbed surface of walls, floors, etc.,complete all as specificed and as directed.

Material and labour for concealed point wiring complete with 1.5 sq.mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sq.mm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including modular metal flush box with white/coloured top cover plate and frame of required modules for mounting of modular switches, sockets,bell push and fan regulators complete incl dismantling / taking down old unserviceable wiring and making good to disturbed surfaces all as specified and as directed for the following:- (a) One light point / fan/ exhaust fan/ bell point controlled by one switch. Make of cable :- Havells/ Finolex/Polycab

All as per Sl Item No. 87 here in before but for one three pin 5 Amps socket outlet point on independent board.

All as per Sl Item No. 87 here in before but for one three pin 5 Amps socket outlet point on same board.

All as per Sl Item No. 87 here in before but FRLSH copper stranded cable of size 2.5 sq.mm for 3/6 pin socket outlet 15 Amps on one independent board along with all fittings and accessories complete.

Material and labour for sub main wiring with two single core PVC insulated multi stranded FRLSH copper conductor cable of size 4.0 sq.mm drawn through in and including PVC conduit of suitable size with all accesories and one single core green colour FRLSH copper conductor cable of size 4 sq.mm as earth wire and connected to earth dolly and making good to disturbed surfaces complete all as specificed and as directed. NOTE :- Two run of cable with one run of earth wire and one run of PVC conduit will be measured as one unit (RM)

Supply and fix 5 Amps switch piano flush type single pole one way all as specified and as directed by Engr-in-Charge. MAKE :- Anchor/Havells/Cona

Supply and fix bell push piano type one way 240 volts all as specified and as directed by Engr-in-Charge. MAKE :- Anchor/Havells/Cona

Supply and fix lamp holder of PVC/ Polycarbonate type with back plate all as specified and directed by Engr-in-Charge. MAKE :- Anchor/Havells/Cona

Supply and fix socket flush type 6 Amps, 5 pin, 230v all as specified and as directed by Engr-in-Charge. MAKE :- Anchor/Havells/Cona

Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 Amps and 3 pin 6 Amps, 230v all as specified and as directed by Engr-in-Charge. MAKE :- Anchor/Havells/Cona

Supply and fix ceiling rose surface bakelite three terminal all as specified and as directed by Engr-in-Charge. MAKE :- Anchor/Havells/Cona

Supply and fix call bell electric, ding dong, AC 240 volt, 50 Hz. including dismantling / taking down un serviceable one all as specified and directed by Engr-in-Charge. MAKE :- Anchor/Havells/Cona

Supply and fix sheet metal enclosure SPN 4 way (MCB DB) double door, 240 Volts AC all as specified and directed by Engr-in-Charge MAKE :- Schneider /ABB/Legrand or eqvt

Supply and fix MCB DB double door 4 way ETPN with 200 Amps rated bus bar 240 volts all as specified and as directed by Engr-in-Charge MAKE :- Schneider /ABB/Legrand or eqvt

Supply and fix MCB TPN 40 Amps, 415 volt 10 KA all as specified and as directed by Engr-in-Charge MAKE :- Schneider /ABB/Legrand or eqvt

Supply and fix MCB, SPN (double pole) 32 Amps, 240 Volts, 10 KA ‘’C” curve all as specified and as directed by Engr-in-Charge MAKE :- Schneider / Legrand/ABB or eqvt

Supply and fix MCB, single pole, 5 to 32 Amps, 240 Volts, 10 KA breaking capacity, ‘’C” curve all as specified and as directed by Engr-in-Charge. MAKE :- Schneider / Legrand/ABB or eqvt.

Supply and fix LED light batten 20 watt ,4 feet AC, PF-0.95 (min), sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro cat part No-LL20-221-XXX-65AL1 and equivalent in CG/Philips/Havells

Supply and fix LED Light batten 10 watt, 2 feet AC, PF-0.95 (min), sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro cat part No-LL20-111-XXX-65NE3 and equivalent in Wipro/Philips/Havells

Supply and fix LED lamp 9 watt, CDL, E-27 230V, PF-0.95 (min) . MAKE :- CG or equivalent to Havells/ Philips / Wipro

Supply and fix LED building security light 20 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sq.mm three core copper flexible conductor cable including one GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fasteners all as specified and as directed by Engr-in-Charge. MAKE :- CG Cat Part No LSTS-20-CDL-M or equivalent in Philips/Wipro.

Energy saving ceiling fans fixed in repairs, 230 Volts, 26 Watts, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufacturers, with latest BEE five star rating and BLDC technology all as per Havells Model No :- Efficiencia Neo (BLDC 26W) or techno commercially equivalent models specified in Orient/Bajaj/Usha complete with down rod and GI hook with welding work, wire connections from ceiling rose to ceiling fans, with complete accessories including writing of MES No with unit name on ceiling fans using approved stencil with synthetic enamal paint complete all as specified and as directed. NOTE :- Old un serviceable ceiling fan shall be deposited to MES store

Exhaust fan 230Volts fixed in repairs, SP, 300 mm Sweep with BEE five star rating,high speed, heavy duty complete with Louvers, clamps with screws nut and bolts, including wire connections from ceiling rose to Exhaust fan complete with all accessories including writing of MES No with Unit Name on Exhaust fans using stencil with synthetic enamel paint all as specified and as directed. NOTE :- Old un serviceable exhaust fan shall be deposited to MES store

Material and labour for earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning, filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion complete all as specified and as directed.

Supply and fix Water heater storage and vertical type, 5 star rated, 230 Volts, 2000 Watts, maximum rated pressure, 25 Litres capacity , tharmostat externally adjustable up to 75oC, wall mounting installation, minium including grouting, nuts bolts, fasteners, connecting of inlet/outlet water connection including hot/cold water connection pipe and electric connections complete all as per Bajaj Cat pat No. (CALDIA SKU Code 150756) or techno commercially equivalent makes specfied in PS with hot and cold PVC connectors (02 Nos) of suitable length complete all as specified and as directed.

Supply and fix metal plug and socket board with MCB SP 16/20 Amps, 16 KA all as specified and directed by Engr-in-Charge. MAKE :- Cat Part No- 5078 11 of Legrand or equivalent of Schneider/ABB

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for cable laying / pipe laying and getting in soft/ loose soil complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for cable laying / pipe laying and getting in hard/dense soil complete all as specified and as directed by Engineer-in-charge.

Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard / dense soil etc complete as specified as directed.

Removing the excavated material to a distance exc. 50m but n. exc. 100m and depositing where directed at a level n. exc. 1.5m above the starting point complete as specified as directed.

Supply, lay and testing 25mm bore medium grade galvanized pipe with all fittings such as tee bends, union, elbow, reducer etc laid in trenches/fixed to walls/floors, ceilings all as specified and as directed .

Supply and fix 25mm bore gun metal gate valve, cast, screwed down, high pressure with iron wheel handle , screwed both ends for iron pipe or unions as specified and as directed.

Supply and fix 20mm bore gun metal gate valve, cast, screwed down, high pressure with iron wheel handle , screwed both ends for iron pipe or unions as specified and as directed.

Cutting existing 25 to 32mm bore steel tubing for alteration or additions (each cut measured) including earth work and accessories like dummy plug, union socket etc in any condition all as directed by Engr-in-charge.

Supply, laying and testing of UG cable, XLPE insulated, screened, PVC bedded galvanised steel strip or wire, armoured, electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 25 sq.mm 4 core including taking down the existing unserviceable cable complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft disintegrated rock.

Material and labour for sand cushioning in layers for cables in trenches / ducts for cable using fine stone dust including consolidation complete all as specified and directed. NOTE :- Punned thickness will be measured for payment purpose. for cousioning of UG cable/ at cable trenches.

Material and labour for Bricks, sub class 'B' of old size 230 mm x 115 mm x 75 mm laid in trenches for cable protection all as specified and directed.

Material and labour for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and as directed. NOTE :- Mass concrete will be measured and paid as saperate item.

Material and labour for plain cement concrete type D2 (1:4:8) using 40mm graded stone aggregate, as in foundations, filling and mass concrete all as specified and as directed.

Material and labour for GI tubing light grade 40mm bore, ISI marked, suitable for cable protection complete all as specified and as directed.

Supply and fix in repairs exhaust fan, AC, single phase 230 volts of size supreme plus 450 mm sweep, metalic body, 1400 RPM industrial exhaust fan with louver and including making good disturbed surfaces to match with existing colour and pattern, connected with 23/0.0076 three core PVC flexible cable from ceiling rose to fan etc complete with all other acessories, such as fasteners, nuts, bolts & washers etc., as required at site for fixing of exhaust fan, all as specified and as directed. MAKE :- Cat part No SKU Code-70064 of Bajaj or equivalent in USHA / Havells / CG.

Supply and fix in repairs air circulator fans 450mm sweep suitable for wall mounting, AC, single phase, 230 volts, including screw, nut & bolts in walls and make good disturbed surface and electric connections with 1.5 sq.mm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified by Engr-in-charge. MAKE :- Crompton Greaves/ Usha / Havells

Supply and fix AC single phase electronic digital energy meter of accuracy class 1.0230/240 volts, 50 Hz with backlit LCD display of rating 10-60 Amps with optical port, (measures and displays of KWH, volts, current (I), KW last month history of KWH, MD in KW with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box complete all as specified and directed by Engineer-in-charge. MAKE :- L&T / Elmeasure / HPL

Supply and fix MCB single pole and neutral metal enclosure with a two pin and eardth plug and socket suitable for flush mounting and surface mounting for protaction of appliances etc complete with and including one MCB single pole 20 Amps 230 volts Make : Cat Part No.507811 of Legrand or eqvt. NOTE :- Old unserviceable at items removed from site/different location vide Sl No No.111, 128 to 130 and items not catered in Schedule of credit of any other above items shall be deposited in store as directed by Eng-in-charge.

V.R.PRAJAPATI AND CO.

DARSHAN ENTERPRISES

Aishwarya Constructions

SAMBHAJI D JARANDE