Bifurcation of 11KV Bala Nagar Feeder

Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.

LOADING & UNLOADING 1 KV VCBs along with Panel boards

UNLOADING of 11 KV VCBs&Panel boards

ERECTION OF EQUIPMENT Substations Erection of 11 KVAB Switch including alignment and earthing

Laying of UG Cable Erection of VCBs 11 KV

Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)

Supply <(>&<)> Spreading of 20mm machine crushed metal(HBG) including cost and conveyance of all materials, labour charges etc. complete for finished item of work and as directed by the engineer-in-charge

S-CI Pipe earthing 100mm dia 2.75m long

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Lay-4C/10C 2.5Sqmm Control Cable

S-Al Pad Clamp 75x75x15mm 1 Panther 600A

Connection of equipment to bus and or another equipment with single zebra/Panther conductor including measuring, cutting,clamping and hoisting of suspension insulator assembly to support the conductor wherever necessary.

ERECTION OF EQUIPMENT Substations Erection of 11 KV LAS line type including earthing

S-MS Bolts & Nuts,Washers etc.,

S&F-33/11KV SS Feeder Indicator Board

CIVIL WORKS : Excavation of pits in all soils except hard rock requiring blasting. 0.76 M x 0.76M x 1.52M (2.6" x 2.6" x 5.0')

Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables

FABRICATION Fabrication of materials U Clamp 50x6 mm MS Flat

Supply of 4" B Class GI pipe with 3.65mm thickness and weight 12.2Kg per meter

Labour charges for Fixing of all types of clamps

S-Earthing GI Wire No 8 incl mat

UNLOADING of 11 KV, 10 KA LAs Line type

LOADING & UNLOADING11 KV, 10 KA LAs Line type -for 100Nos

LOADING & UNLOADING11 KV AB Switch Conventional type 200/400 A

UNLOADING of 11 KV AB SWCH Con 200/400 A

Previously 28.07.2020 - Excav. of pit in soils except hard rock

Construction of Plinth for mounting 11KV VCB of size 1.8mx1.8mx 0.75m (0.3m above GL <(>&<)> 0.45m below GL) with 1:3:6 CC , 40mm HBG metal including plastering and cost of cement

Transport of Cond Drum,VCBs upto 10Km

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

AB Switch Coil Earthing GI No. 8 Wire

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

Replace-ON & OFF push buttons assembly

Testing & Commissioning of Equipment

Provide Addl. Feeder on DC Annunciation

Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).

Network Connectivity for control center MPLS link...billed quarterly

Load-PVC Control Cable 10C

FABRICATION Drilling of holes upto 20 mm dia using power drills per Hole MS Channel, Angles and flat

S-GI pipe earthing 40mm dia 2m long

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

L-Cable Termination to Switchgear

R.S. joist box poles -Excavation of pit of size 21/2' x 21/2'x5' transportation, loading / unloading erection of pole fixing of cross arms complete painting of one coat of red oxide and two coats of aluminium and coil earthing with GI no. 8 wire and including required bolts and nuts of required size.

Lay-SR 11KV 3x300sqmm UG Cb CC/BT Compsr

Raise-SR 11KV 3x300sqmm UG Cb on support

LOADING & UNLOADING11 KV AB Switch Conventional type 200/400 A

UNLOADING of 11 KV AB SWCH Con 200/400 A

Exca Hard pit w/o blast 0.76X0.76X1.83M

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

Load-11/33KV XLPE UG Cable for all sizes

Unload-11/33KV XLPE UG Cable all sizes

AB Switch Coil Earthing GI No. 8 Wire

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

ERECTION OF LINES : UG Cables Jointing :Outdoor / Indoor end termination 11 KV XLPE UG Cable 3 x 300 Sqmm

Supply of 6" B Class GI Pipe with 5mm thickness and weight 20Kg per meter

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

ERECTION OF EQUIPMENT Substations Erection of 11 KVAB Switch including alignment and earthing

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

S-MS Bolts & Nuts,Washers etc.,

Detailed survey of line and cable including peg marking and necessary tree clearance

Transport of Cond Drum,VCBs upto 10Km

S-Earthing GI flat 25x3 mm incl material

ERECTION OF LINES : Erection of pole in position, aligning and setting to work, fixing of cross arms and top clamps, earthing of supports, back filling with earth and stones properly ramming including transport of materials from road side to location ex

Supply of 6" B Class GI Pipe with 5mm thickness and weight 20Kg per meter

Lay-SR 11KV 3x300sqmm UG Cb FootPath GI

ERECTION OF LINES : UG Cables Jointing : Straight through joints11 KV XLPE UG Cable 3 x 300 Sqmm

ERECTION OF LINES : Erection of pole in position, aligning and setting to work, fixing of cross arms and top clamps, earthing of supports, back filling with earth and stones properly ramming including transport of materials from road side to location ex

Load-11/33KV XLPE UG cable all size

Unload-11/33KV XLPE UG cable all size

FABRICATION Fabrication of materials Back clamps with 50 x 6 mm MS Flat

CIVIL WORKS :Excavation of pits in all soils except hard rock requiring blasting. 0.75 M x 0.9 M x 1.95 M

Erection of 9/10/11Meter Box pole

Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.

TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 20 KM and upto 30 KM

Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.

Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium

(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc

(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .

Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).

Erection of 33kv CT s

Erection of 33kv single phase PT s

Erect-33KV AB Switch in SS

LOADING & UNLOADING 33/11 KV CTs/ PTs

UNLOADING of 33/11 KV CTs/ PTs

LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A

UNLOADING of 33 KV AB SWCH Con 400/800 A

Erection of HT Metering Box Including Cost of Meter Box

Erect-HT Trivector Meter

Construction of Plinth for mounting HT Trivector meter of size 0.6mx0.3mx 0.9m (0.6m above GL with Brick Masonary <(>&<)> 0.3m below GL with PCC 1:2:4 ) , with 1:2:4 CC bed 3" on top <(>&<)> with 1:4:8 CC bed 4" on bottom including cost of cement

ERECTION OF EQUIPMENT Substations Erection of 33 KV LAS station type including earthing

Cement concrete 1:3:6 ration with 40 MML HBG metal including the cost of all materials and labour complete 1.8 x 1.8 x 0.75 Cum. forVCB plinth

Laying of UG Cable Erection of VCBs33 KV

S-CI Pipe earthing 100mm dia 2.75m long

S-Earthing GI flat 25x3 mm incl material

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

LOADING & UNLOADING 33 KV VCBs along with Panel boards

UNLOADING of 33 KV VCBs&Panel boards

Transport of Cond Drum,VCBs >20 & <30Km

Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)

Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.

Painting of Name Plates for any equipmen

Lay-4C/10C 2.5Sqmm Control Cable

Excavate-Pit for 33KV VCB

S-GI Bolts & Nuts,Washers etc.,

Alluminum alloy T clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for panther ACSR on all three ways/ on one side and Zebra ACSR on take off side or any other combination for carrying 800 A current rating .

Alluminum alloy Pad clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for twin panther ACSR/Zebra of pad size 100 X 100 X 15mm for carrying 1200 A current rating .

Labour charges for Fixing of all types of clamps

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

Erect-24V Batery with Chrgr incl grot-SS

Stringing of bus with panther conductor including jumpering etc., complete to all the equipment in SS fixing to all clamps and e

ERECTION OF LINES : Paving out conductor, providing temporary stays, tensioning, sagging correctly, fixing strain points, transferring to pin points binding, rectification of poles, guys and jumpering etc., including transport of material from road side

LOADING & UNLOADING24 V Battery with charger

Supply <(>&<)> Spreading of 20mm machine crushed metal(HBG) including cost and conveyance of all materials, labour charges etc. complete for finished item of work and as directed by the engineer-in-charge

Supply of Danger boards with clamps

S&F MS Security Fencing Mesh (2"X2")

Fix-150W HP SV/LED/Induction/other lamp

Supply of LC Boards

SupRubber mats( 6’x3’)size for indoorSS

Supply of Gum Boots

S-Discharge Hse Pipe 50L Co2 FireExtgr

CRS Masonary CM(1:6) 2nd Sort

UNLOADING of 24 V Battery with charger

Previously 28.07.2020 - Laying of 2nd cable in excavated trench

Supply of 33KV 3x400Sqmm O/D End Kit

Supply of 33KV 3x400Sqmm Straight through Kit

ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable

ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable

Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr

Supply of 150 mm Hume pipe of class NP3 with compresive strength of 35N/mm2 for 28 days curing,barewall thickness of 30mm,1.25kG linear/meter and withstanding capability of 22.50KN/linear meter as per IS 458-1993.

Excavation of earth pit, supply of cast iron pipe with flange on one end (as per ISS7181/86) of nominal dia 125mm and 2.75 meters long in side the pit including supply and fixing RCC collars 0.75 meter dia (OD), 50mm thick and 0.60meters long complete as per APTRANSCO standards

CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.

Erection of 9/10/11Meter Box pole

S-GI Bolts & Nuts,Washers etc.,

ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing

LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A

Supply of 9" B Class with 7.3mm thickness and weight 28.8Kg per meter

Hring of Crane for mounting equipment

Testing & Commissioning of Equipment

Coping & Muffing-Iron Pole

Supply of Danger boards with clamps

UNLOADING of 33 KV AB SWCH Con 400/800 A

Consultation charges for providing traffic diversions and meeting other exegencies for excution of work during late night hours and wie hours

Consultan Chrgs for Pursuing Rd Cutting

Laying of 33<(>&<)>11KV UG cable by HDD method with casing HDPE pipe of 160mm PN4 PE 80 as per IS4984

Carrying out the ground penetrating radar survey of route to locate the utilities like cable <(>&<)> pipes etc in Narmal soil <(>&<)> hard rock

Smart RFID markers SM1500 Power RFID based Electronic cable/pipe marker 22.5cms Dia, 15.m Depth Range, 10 Digits Hexadecimal ID code, 134.0KHZ frequency

Raise-DR 33KV 3x400sqmm UG Cb on support

Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables

TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,

UNLOADING of MS Channel,Angles,Flats&Rod

Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001

Detailed survey of line and cable including peg marking and necessary tree clearance

Cut-Tree Branch(LT/11/33)&Trnsprt Debris

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

AB Switch Coil Earthing GI No. 8 Wire

S-Earthing GI flat 25x3 mm incl material

S-CI Pipe earthing 100mm dia 2.75m long

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc

(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .

Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.

Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium

S-MS Bolts & Nuts,Washers etc.,

Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).

PCC with 20mm Metal (1:2:4)

S&Fix-3x300sqmm 11KV UG Cb StrgtThrJoint

Erect-33KV AB Switch in SS

ERECTION OF EQUIPMENT Substations Erection of 33 KV LAS station type including earthing

Cement concrete 1:3:6 ration with 40 MML HBG metal including the cost of all materials and labour complete 1.8 x 1.8 x 0.75 Cum. forVCB plinth

Laying of UG Cable Erection of VCBs33 KV

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

LOADING & UNLOADING 33 KV VCBs along with Panel boards

UNLOADING of 33 KV VCBs&Panel boards

Transport of Cond Drum,VCBs >20 & <30Km

Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)

Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.

Painting of Name Plates for any equipmen

Lay-4C/10C 2.5Sqmm Control Cable

Excavate-Pit for 33KV VCB

S-GI Bolts & Nuts,Washers etc.,

Alluminum alloy T clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for panther ACSR on all three ways/ on one side and Zebra ACSR on take off side or any other combination for carrying 800 A current rating .

Alluminum alloy Pad clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for twin panther ACSR/Zebra of pad size 100 X 100 X 15mm for carrying 1200 A current rating .

Labour charges for Fixing of all types of clamps

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

Erect-24V Batery with Chrgr incl grot-SS

Stringing of bus with panther conductor including jumpering etc., complete to all the equipment in SS fixing to all clamps and e

LOADING & UNLOADING24 V Battery with charger

Supply <(>&<)> Spreading of 20mm machine crushed metal(HBG) including cost and conveyance of all materials, labour charges etc. complete for finished item of work and as directed by the engineer-in-charge

Supply of Danger boards with clamps

S&F MS Security Fencing Mesh (2"X2")

Fix-150W HP SV/LED/Induction/other lamp

Supply of LC Boards

SupRubber mats( 6’x3’)size for indoorSS

Supply of Gum Boots

S-Discharge Hse Pipe 50L Co2 FireExtgr

CRS Masonary CM(1:6) 2nd Sort

UNLOADING of 24 V Battery with charger

Previously 28.07.2020 - Laying of 2nd cable in excavated trench

Supply of 33KV 3x400Sqmm O/D End Kit

Supply of 33KV 3x400Sqmm Straight through Kit

ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable

ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable

Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr

Supply of 150 mm Hume pipe of class NP3 with compresive strength of 35N/mm2 for 28 days curing,barewall thickness of 30mm,1.25kG linear/meter and withstanding capability of 22.50KN/linear meter as per IS 458-1993.

Excavation of earth pit, supply of cast iron pipe with flange on one end (as per ISS7181/86) of nominal dia 125mm and 2.75 meters long in side the pit including supply and fixing RCC collars 0.75 meter dia (OD), 50mm thick and 0.60meters long complete as per APTRANSCO standards

CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.

Erection of 9/10/11Meter Box pole

S-GI Bolts & Nuts,Washers etc.,

ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing

Transport of Cond Drum,VCBs >10 & <20Km

LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A

S-25W LED fixture set

Supply of 9" B Class with 7.3mm thickness and weight 28.8Kg per meter

Hring of Crane for mounting equipment

Testing & Commissioning of Equipment

Coping & Muffing-Iron Pole

Supply of Danger boards with clamps

UNLOADING of 33 KV AB SWCH Con 400/800 A

Consultation charges for providing traffic diversions and meeting other exegencies for excution of work during late night hours and wie hours

Consultan Chrgs for Pursuing Rd Cutting

Laying of 33<(>&<)>11KV UG cable by HDD method with casing HDPE pipe of 160mm PN4 PE 80 as per IS4984

Carrying out the ground penetrating radar survey of route to locate the utilities like cable <(>&<)> pipes etc in Narmal soil <(>&<)> hard rock

Smart RFID markers SM1500 Power RFID based Electronic cable/pipe marker 22.5cms Dia, 15.m Depth Range, 10 Digits Hexadecimal ID code, 134.0KHZ frequency

Raise-DR 33KV 3x400sqmm UG Cb on support

S-M+3 Tower GALV

Erect- M+3 Tower GALV

S-Mat. for Extn of M+3 Tower by 3M GALV

Erect-Extn of 3M for M+3 Tower GALV

Excvt Pit Hard wt Blst 1.2Mx1.2Mx3.3M

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Paving out conductor, providing temporary stays, tensioning, sagging correctly, transferring to pin points binding, rectification of poles, guys and jumpering etc., including transport of material from road side to location. 11 KV lines : "100 Sqmm Conductor (6 Conductors) - DC"

Formation of Vertical Cut point for 33 KV line excluding pole erection and stays

Formation of (Vertical/ Horizontal) Cut point for 11 KV line excluding pole erection and stays

Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables

TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,

UNLOADING of MS Channel,Angles,Flats&Rod

Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001

LOADING & UNLOADING Conductor drums

UNLOADING of Conductor drums

Detailed survey of line and cable including peg marking and necessary tree clearance

Cut-Tree Branch(LT/11/33)&Trnsprt Debris

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

AB Switch Coil Earthing GI No. 8 Wire

S-Earthing GI flat 25x3 mm incl material

LOADING of 33KV Metal parts-bag of 25no

UNLOADING of 33 KV Metal parts-bagof 25

LOADING & UNLOADING33 KV Pins -35Nos each Bag

UNLOADING of 33 KV Pins

Drill-Hole in HardRock 4Legs Per Tower

S-CI Pipe earthing 100mm dia 2.75m long

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

Fabricate-LT 3Ph 5Wire Side Arm

Fabricate-11KV Side Arm

Formation of (Vertical/ Horizontal) Cut point for 11 KV line excluding pole erection and stays

Formation of (Vertical / Horizontal) Cut point for LT line excluding pole erection and stays Single Circuit

Restring-LT 3-Ph 55Sqmm 5 Conduct

Restring-55 Sqmm SC-3 Conductors

Dismantle-Spun poles 11 Mtrs PSCC

Painting of RS Joist, Rail pole including cross arms, clamps with two coats of Al. paint including cost of paint and consumables."

Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc

(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .

Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.

Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium

S-MS Bolts & Nuts,Washers etc.,

Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).

S&Fix-3x300sqmm 11KV UG Cb StrgtThrJoint

PCC with 20mm Metal (1:2:4)

Dismantling of 100 Sqmm conductor SC

Previously 28.07.2020 - Laying of 2nd cable in excavated trench

Supply of 33KV 3x400Sqmm O/D End Kit

Supply of 33KV 3x400Sqmm Straight through Kit

ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable

ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable

Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr

Supply of 150 mm Hume pipe of class NP3 with compresive strength of 35N/mm2 for 28 days curing,barewall thickness of 30mm,1.25kG linear/meter and withstanding capability of 22.50KN/linear meter as per IS 458-1993.

CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.

Erection of 9/10/11Meter Box pole

S-GI Bolts & Nuts,Washers etc.,

ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing

LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A

Supply of 9" B Class with 7.3mm thickness and weight 28.8Kg per meter

Hring of Crane for mounting equipment

Testing & Commissioning of Equipment

Coping & Muffing-Iron Pole

Supply of Danger boards with clamps

UNLOADING of 33 KV AB SWCH Con 400/800 A

Consultation charges for providing traffic diversions and meeting other exegencies for excution of work during late night hours and wie hours

Consultan Chrgs for Pursuing Rd Cutting

Laying of 33<(>&<)>11KV UG cable by HDD method with casing HDPE pipe of 160mm PN4 PE 80 as per IS4984

Carrying out the ground penetrating radar survey of route to locate the utilities like cable <(>&<)> pipes etc in Narmal soil <(>&<)> hard rock

Smart RFID markers SM1500 Power RFID based Electronic cable/pipe marker 22.5cms Dia, 15.m Depth Range, 10 Digits Hexadecimal ID code, 134.0KHZ frequency

Raise-DR 33KV 3x400sqmm UG Cb on support

Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables

TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,

UNLOADING of MS Channel,Angles,Flats&Rod

Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001

Detailed survey of line and cable including peg marking and necessary tree clearance

Cut-Tree Branch(LT/11/33)&Trnsprt Debris

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

AB Switch Coil Earthing GI No. 8 Wire

S-Earthing GI flat 25x3 mm incl material

S-CI Pipe earthing 100mm dia 2.75m long

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

Painting of RS Joist, Rail pole including cross arms, clamps with two coats of Al. paint including cost of paint and consumables."

Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc

(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .

Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.

Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium

S-MS Bolts & Nuts,Washers etc.,

Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).

PCC with 20mm Metal (1:2:4)

S&Fix-3x300sqmm 11KV UG Cb StrgtThrJoint

Erect-33KV AB Switch in SS

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)

Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.

Painting of Name Plates for any equipmen

S-GI Bolts & Nuts,Washers etc.,

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

Supply of Danger boards with clamps

S-33KV TreeRetardnt XLPE UG Cb 3x400Sqmm

Previously 28.07.2020 - Laying of 2nd cable in excavated trench

Supply of 33KV 3x400Sqmm O/D End Kit

Supply of 33KV 3x400Sqmm Straight through Kit

ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable

ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable

Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr

Supply of 150 mm Hume pipe of class NP3 with compresive strength of 35N/mm2 for 28 days curing,barewall thickness of 30mm,1.25kG linear/meter and withstanding capability of 22.50KN/linear meter as per IS 458-1993.

Excavation of earth pit, supply of cast iron pipe with flange on one end (as per ISS7181/86) of nominal dia 125mm and 2.75 meters long in side the pit including supply and fixing RCC collars 0.75 meter dia (OD), 50mm thick and 0.60meters long complete as per APTRANSCO standards

CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.

Erection of 9/10/11Meter Box pole

S-GI Bolts & Nuts,Washers etc.,

ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing

Transport of Cond Drum,VCBs >10 & <20Km

LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A

Supply of 9" B Class with 7.3mm thickness and weight 28.8Kg per meter

Hring of Crane for mounting equipment

Testing & Commissioning of Equipment

Coping & Muffing-Iron Pole

Supply of Danger boards with clamps

UNLOADING of 33 KV AB SWCH Con 400/800 A

Consultation charges for providing traffic diversions and meeting other exegencies for excution of work during late night hours and wie hours

Consultan Chrgs for Pursuing Rd Cutting

Laying of 33<(>&<)>11KV UG cable by HDD method with casing HDPE pipe of 160mm PN4 PE 80 as per IS4984

Carrying out the ground penetrating radar survey of route to locate the utilities like cable <(>&<)> pipes etc in Narmal soil <(>&<)> hard rock

Smart RFID markers SM1500 Power RFID based Electronic cable/pipe marker 22.5cms Dia, 15.m Depth Range, 10 Digits Hexadecimal ID code, 134.0KHZ frequency

Raise-DR 33KV 3x400sqmm UG Cb on support

S-M+3 Tower GALV

Erect- M+3 Tower GALV

S-Mat. for Extn of M+3 Tower by 3M GALV

Erect-Extn of 3M for M+3 Tower GALV

Excvt Pit Hard wt Blst 1.2Mx1.2Mx3.3M

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

ERECTION OF LINES : Paving out conductor, providing temporary stays, tensioning, sagging correctly,fixing strain points, transferring to pin points binding, rectification of poles, guys and jumpering etc., including transport of material from road side

Formation of Vertical Cut point for 33 KV line excluding pole erection and stays

Formation of (Vertical/ Horizontal) Cut point for 11 KV line excluding pole erection and stays

Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables

TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,

UNLOADING of MS Channel,Angles,Flats&Rod

Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001

LOADING & UNLOADING Conductor drums

UNLOADING of Conductor drums

Detailed survey of line and cable including peg marking and necessary tree clearance

Cut-Tree Branch(LT/11/33)&Trnsprt Debris

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

AB Switch Coil Earthing GI No. 8 Wire

S-Earthing GI flat 25x3 mm incl material

LOADING of 33KV Metal parts-bag of 25no

UNLOADING of 33 KV Metal parts-bagof 25

LOADING & UNLOADING33 KV Pins -35Nos each Bag

UNLOADING of 33 KV Pins

Drill-Hole in HardRock 4Legs Per Tower

S-CI Pipe earthing 100mm dia 2.75m long

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

Fabricate-LT 3Ph 5Wire Side Arm

Fabricate-11KV Side Arm

Formation of (Vertical/ Horizontal) Cut point for 11 KV line excluding pole erection and stays

Formation of (Vertical / Horizontal) Cut point for LT line excluding pole erection and stays Single Circuit

Restring-LT 3-Ph 55Sqmm 5 Conduct

Restring-55 Sqmm SC-3 Conductors

Painting of RS Joist, Rail pole including cross arms, clamps with two coats of Al. paint including cost of paint and consumables."

Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc

(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .

Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.

Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium

S-MS Bolts & Nuts,Washers etc.,

Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).

S&Fix-3x300sqmm 11KV UG Cb StrgtThrJoint

PCC with 20mm Metal (1:2:4)

Superintending Engineer