KMC/WD7/APAS/01/166/18/0004

Outdoor Lighting Installation, Steel Tubular Pole, M.S. Pipe, G.I. Pipe, Pole CAP etc Supplying of Swaged Steel Tubular pole as per IS 2713, Pt. II, 1980 for following designation and of following dimensions.(Outside dia & thickness are given in Annexture -1)h) 410 SP - 24 ; 8.5 Mtr., 158.00 Kg.

SCHEDULE OF RATES FOR OH LINE INSTALLATION (LT DISTRIBUTION).Erection of Poles.Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyUpto 9.0 mtr. Size 0.6x0.6x1.70 mts

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Soil Excavation.Excavation of soil FOR installation of Earth Electrode and filling & ramming.FOR Morrum Soil.

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe.

SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION - REPAIR 13. Providing CC (6:3:1) muffing 450x450x600 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if any incl. fixing only loop box if necessary (a) Without Loop Box

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.(i)1st coat of aluminium paint over 1 coat of RO priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.ii2nd coat of aluminium paint over 1st coat

S/F SINTEX 2(BOTTOM SIDE) AND 2(TOP SIDE),FRP(FIBRE REINFORCED PLASTIC) WHITE WATERPROOF FR RECTANGLE SHAPE SINTEX LOOPING CABLE BOX (GSJB 3020), POLE MOUNTING, OF SIZE HEIGHT-300MM,WIDTH-200MM, DEPTH-125MM, MATERIAL SHEET THICKNESS 4MM, 500 GMS, 2 WAY(BOTTOM SIDE),2(TOP SIDE) INSULATION RESISTANCE GREATER THAN 200 MEGAOHMS, IP66(AS PER IS/IEC 60529:2001 LATEST), 4 NOS TERMINAL CONNECTOR,HAVING VOLTAGE GRADE OF TERMINAL BLOCK 1100V, 50 HZ, AC, FIRE RETARDANT CLASS-FV-0(AS PER IS:11731 PART-II), FLAME PROOF,IIA,T6 TEMP. CLASS(AS PER IS/IEC 60079-0 & 1:2007 LATEST), NO, WITH ONE NUMBER SP MCB MOUNTED INSIDE THE BOX, ONE COMPRESSION TYPE BRASS CABLE GLAND FOR UPTO 4 CORE 16 SQMM PVC/A CABLE, FRONT COVER WITH 4 NOS OF FASTNERS WITH RETAINERS (STAINELESS STEEL 304 GR.) AS PER RATE OBTAINED FROM GEM PORTAL

SUPPLY, INSTALLATION & COMMISSIONING OF FINDER MAKE 3(THREE) PHASE TWO PORT INDOOR SURGE PROTECTOR PANEL WITH THE FOLLOWING SPECIFICATIONS, AS PER IS 16463, PART 11, 2016 OR IEC 61643-11, 2011, RMS MAXIMUM CONTINUOUS OPERATING VOLTAGE 320 V, IP-20, UPTO 1.5 KV VOLTAGE PROTECTION LEVEL, CLASS I+CLASS II ACCURACY COMES WITH MINIMUM 2 YEARS WARRANTY PERIOD AS PER THE RATE OBTAINED FROM GEM PORTAL

Outdoor Lighting Installation, Steel Tubular Pole/ M.S Pipe/ G.I. Pipe, Pole CAP etc. Supplying & Fixing of G.I pole cap for suitable size

S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1. 5 m (5') length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work

S/F fabricating, welding, G.I. junction and 2.1 M long double arm projected bracket made of 2" dia G.I. pipe (ISI medium) with 2 nos. thro... bolts & nuts of 175 mm(7") long 15.6 mm (5/8") dia junction with set screw etc. complete as per per direction of Engineer-In-Charge.

SUPPLY AND DELIVERY OF 200 WATTS LED FLOOD LIGHT FITTINGS OF SUPERIOR MAKE AS PER KMC LAST STORE PURCHASE BASIS WITH 5 YEARS WARRANTY

Erection of Galv. (HOT Dip) Cross arms/ `D... Iron Clamp8).M Supplying & Erection of Galv. `D... iron complete with suitable pole clamp 100mmx114mm porcelain shackle insulator & 19 mm dia Galv. bolts & nuts. incl. painting

SUPPLY AND DELIVERY OF 200 WATTS LED STREET LIGHTS OF ANY SUPERIOR MAKE AS PER KMC LAST STORE PURCHASE 5 YEARS WARRANTY

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab).10sqmm x 4core

Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing

Drawing of unarmoured cable of suitable size (supply of cable is not included in the scope)on existing Galvanized stranded wire for centenary system with reel insulators and binding wires.

SUPPLY AND DELIVERY OF 40 WATTS LED STREET LIGHTS OF ANY SUPERIOR MAKE AS PER KMC LAST STORE PURCHASE RATE BASIS WITH 5 YEARS WARRANTY

Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab). 10sqmm x 2core

Laying on Wall / surface with Saddles / clamps.(a)Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (HOT Dip) Wire, making holes etc. as necy. mending good damages and painting

S/F projected lamp bracket made 50mm dia G.I. Pipe of 1.85 M (6') in length of which 0.9M (3') In projection having .an angle of 105 degree with clamps, bolts, nuts & clamps, etc. as required .

Supply and Fixing of fuse unit complete with base and bridge on existing Board and necessary connection, for the following range.60 Amp. / 63 Amp., 415 V

Painting steel tubular pole including projected arm bracket with one coat of red oxide primer and two coats with si lverlac AI. paint ete. (Scraping where necessary).Painting upto7 mtr Pole

Compression Glands.Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below : FOR 4 core.i)ii)upto 10 sqmm

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 16 7/1.70 4

Laying through Underground Trech.(a)Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 53. 32mm heavy gauge Polythene Pipe

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 124. 40mm GI pipe (ISI-Medium)

Sub Total