Loading…
Loading…
Tender Value
₹5.3 Cr
EMD Value
₹10.5 L
Closing Date
4 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ENGG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Civil Engineering Work excluding zonal works.
21 conditions · 7 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus ten percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
A. SC-MUE sectio:- Construction of boundary wall at Nizamabad Station and approaches under the jurisdiction of ADEN/NZB. B. HYB Div: Provision of Merchant room at DHP C. HYB Div :- Proposed substation building HT/LT Strengthening at Kamareddi as part of Amrit Bharat Scheme. (Civil works)
43_DRM_W_HYB_26
43_DRM_W_HYB_26
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹10.5 L
4 May 2026
10 Apr 2026
20 Apr 2026
258 items across 6 schedules · ₹6,19,96,729.21 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in- charge at site- Up to a depth of 100 meters. | RM | 100.00 | 321.9 | 32,190 |
| 2 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in- charge at site- For a depth of 101 - 150 meters. | RM | 50.00 | 548.69 | 27,434.5 |
| 3 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in- charge at site- For a depth of 151 - 200 meters. | RM | 50.00 | 834.02 | 41,701 |
| 4 | Providing and fixing on wall face unplasticized Rigid PVC Soil Waste pipes conforming to IS:13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer-in-charge at site. - 75 mm dia | RM | 8.00 | 538.22 | 4,305.76 |
| 5 | Providing and fixing on wall face unplasticized Rigid PVC Soil Waste pipes conforming to IS:13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer-in-charge at site. - 110 mm dia | RM | 8.00 | 762.96 | 6,103.68 |
| 6 | Supplying, erecting and fixing precast concrete reinforced bench with back rest. Bench shall consist of 2 nos. L shaped base support in natural cement colour of thickness 100 mm, back height 1000 mm, front height 450 mm, base width 620 mm and 5 nos. reinforced concrete planks in red colour and size of 1500 x 100 x 50 mm and 1 no. reinforced concrete plank of 1500 x 200 x 50 mm; manufactured by using M 30 grade concrete & reinforced suitably, all parts to be joined with galvanized nuts and bolts of suitable size. All bolts to be seated after assembly. Complete job to be done as per directions of Engineer-in-charge. | Each | 3.00 | 8,279.32 | 24,837.96 |
| Schedule total | ₹1,36,572.9 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Spl.conditionsofthework_boundarywall.pdf
ATTACHMENT
Sketchboundarywall_NZB.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
GCC2022_compressed.pdf
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf Approved brand
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
SPECIALCONDITIONSOFWorkDHP-KMC.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .