Supply and Laying of 1X240Sqmm, 1X150Sqmm, 1X70Sqmm and 1X16Sqmm Flexible Copper Cable and 4X35 Sqmm armored Copper Cable, AC MCBDB and DC MCBDB for installation of DC PPs and battery bank for IMS at Regional Network centre RNC at Teli Bagh, Lucknow

Supplying, Laying and fixing of following size single core PVC insulated industrial multistrend cable with FRLSH properties with flexible bright annealed copper conductor for voltage grade upto 1100 Volt confirming to IS 694:2010/IS 17048 i/c laying of cable on surface / wall/ cable tray/ duct with suitable size shaddle / tie for laying of cable etc as required. (a) 240sqmm Cu cable (Red colour)

(b) 240sqmm Cu cable (Blue colour)

© 150sqmm Cu cond cable (Green Colour)

(d) 70sqmm Cu cond cable (Red colour)

(e) 70sqmm Cu cond cable(Blue colour)

(f) 70sqmm Cu cond cable (Green Colour)

(g) 16sqmm Cu cond cable (Green Colour)

Supplying, Laying and fixing of 4X35 sqmm PVC insulated and PVC sheathed / XLPE armored copper cable of 1.1 kV grade of following size i/c laying of cable on surface / wall/ cable tray/ duct with suitable size shaddle / tie for laying of cable etc as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.). (a) 12 way (4 + 36), Double door

Supplying and fixing 100 Amp four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 32 A triple pole, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with onnections, testing and commissioning etc. as required.

Supply, installation, testing and commissioning of suitable size DC distribution board of sheet steel, dust protected, duly powder painted having suitable space to accomodate 8 No DC MCB of 125A capacity anc 800A din type fuse with mounting arrangement, tinned copper bus bar of suitable rating and capable of catering four terminations of 240sqmm single core copper cable, , suitable size tinned copper bus bar for positive and negative i/c 8 No DC MCB of 125A & 800A din type fuse with mounting arrangement and MS base frame for mounting the DCDB, DC din bar for mounting the MCB etc complete as per site requirement.

Supplying and installing following size perforated Hot Dipped Galvanised Iron cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. (a) 150 mm width X 50 mm depth X 1.6 mm thickness

(b) 200 mm width X 50 mm depth X 1.6 mm thickness

Providing and fixing earth bus of 50mmX5mm copper strip on surface for connection etc complete with insulators, making required number holes etc as required

Supply and making end termination with the copper lugs as per requiremnt etc complete as required. (a) 240sqmm Cu Lug

(b) 150sqmm Cu Lug

© 70sqmm Cu Lug

(d) 16sqmm Cu Lug

(e) 4x35Sqmm cu lug with suitable gland.

Raj electrials