SR TO BLDG NO P 154 T 43 T 44 T 45 T 46 T 51 T 52 AND T 53 AND CERTAIN SR REPLACEMENT OF INTERNAL ELECTRICAL LT MCBs DBs AND CONNECTED ACCESSORIES AT BLDG NO P 222 AND P 224 UNDER AGE BR I AND AGE EM I OF GE 865 EWS

Amount

Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 but nexc .18 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:4) 15mm thick laying floor tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200/450 x 350 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed

M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and directed.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge.

All as per above item Ser No 8.00 but n'exc 1.0 sqm complete all as directed by Engr-in-charge

Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement

S&F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48kg/Cum (cylindrical vertical type/rectantular loft type closed top) hoisted and fixed in position all as specified and directed by Engr-in-Charge.

S&F in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap) complete all as specified and as directed

S & F in repair 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe

S&F in repairs Angle stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe fixed in repairs. complete all as directed by Engr-in-charge.

S&F in repairs swivel shower with arm of PTMT any colour for fixing witth 15mm pipe (Min wt 40 gms)

S&F in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed.

S&F Grating round 140mm size PTMT (Minimum weight 50 gms) complete all as specified and as directed

S&F in repairs Soap dish Cromum plated complete all as specified and as directed

S&F in repairsTowel rail 600mm long Cromum plated (Minimum weight 190 gms) complete all as specified and as directed

Taking down steel tubing 25 or 32 mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge.

S&F 3 layer PP-R Polypropylene random copolymer pipes 25mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc.

All as per above item no 23.00 but 32 mm bore pipe complete all as specified and as directed

S&F in repairs PP-R gate valves 25 mm dia (brass insert) as per requirement of the site complete all as specified and as directed

S&F in repairs Vitreous China squatting pan 'Orissa' pattern,size 580x440 mm white with ntegral foot rests (excluding flushng cistern and flush pipe) and all as directed by Engneer-n Charge.

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets

S&F in repairs for wash basin, vitreous china ,white , flat back, size 630X450 mm including bbrackets & including cutting for and pinning in ends of brackets or errecting stand but excusive of fixing of supply and waste pipe as spfd and directed

S&F in repairs Waste coupling for bore dia discharge pipe of PTMT (half or full threaded) minimum weight 32 -45 gms/40mm -60gms).

S &F in repairs Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins.

Dismantling CI/PVC pipes of up to 100mm bore with fittings.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber joints fixed to walls complete all as specified and directed by Engr-in-charge.

PVC (SWR) 'S or P', trap of 110 mm bore.

S/F 110 mm dia (SWR) bend any redius complete all as specified

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed

M&L for 15mm thick rendering using water proofing compound @ 3% of cement on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed : Note : WPC carried out shall be measured and paid seperately.

M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L for 5mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed by engr in charge.

M&L Intergral water proofing compound

Applying a thin film of cement slurry 2mm thick mixing with water proofing compound as per manufacturers instruction on floor surface

M&L for preperation of new concrete /plastered surface of any description and applaying two coat of exterior emulsion paint over a coat of primer complete all as specified and as directed complete all as specified and as directed.

M&L for preperation of new concrete /plastered surface of any description,applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed.

M&L for preperation of new concrete /plastered surface of any description,applying 3mm thick wall care putty and two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed.

M&L for preperation of new plastered on ceiling surface of any description and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated plastered/unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying two coat of white washing complete all as specified and as directed.

M&L for preperation of old decorated plastered/unplastered surface of any description and complete removal of existing treatment of two coat of white wash on old white washed surfaces of ceiling including preparation complete all as specified and as directed by Engr-in-charge.

M&L for preperation of old decorated plastered/unplastered surface of any description and complete removal of existing treatment, applying two coat of distemper oil emulsion complete all as specified and as directed complete all as specified and as directed.

M&L for preperation of old decorated plastered/unplastered surface of any description and complete removal of existing treatment and applying two coat of exterior emulsion paint complete all as specified and as directed complete all as specified and as directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

S&F Powder Coated Anodised aluminium frame of standerd section for doors, windows, ventilators , Partitions etc with double rebates including joining cleat for fixing etc. complete all as specified

S&F Powder Coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M&L sheet glass 5.5mm thick ordinalry quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed

S&F 2nd class hardwood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage

Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm complete all as specified.

S&F for 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with panels with lock rail and panelled of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F 2nd class hard wood (kail) glazed and Skelton shutters, 35mm thick, open rebated and prepared to receive glass/gauge etc (with stiles and rails) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing wire mess etc sizes of members of shutters as specified in SSR Part - I section 8, clause 8.24 (a), supplied and fitted to chowkats complete.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .

M&L sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

M&L figured glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F Galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned stacks, or galvanized wire staples.

S & F in repair Galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned stacks, or galvanized wire staples.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

S&F in repairs mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed

Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

All as per above item Ser No 81.00 but on ceiling complete all as specified and as directed

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

S&F 30 mm thick 2nd class hardwood Glazed and skelton shutter, open and prepared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and as directed by the Engr-in-Charge..

S & F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n ot exceeding 0.5 Sqm in each pane complete all as specified and as directed

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete.

Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed

S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275.

M&L for preparation of new steel surfaces and applying two coats of synthitic enamel paint on over a coat of redoxide primer all as specified and directed complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surface and applying two coat of cement based paint complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

One light/exhaust fan point controlled by one way switch

One switch socket outlet 6 Amps, 230 volts point on Same board

One switch socket outlet 6 Amps, 230 volts point on independent board

All as per above item Ser No 102.00 above, but using cables 4 Sq mm size

Supply and fixing in replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

Supply and fixing in replacement of switch Socket combination out let 5 pin 6 Amps flush type.230 volts complete all as directed.

Supply and fixing in replacement of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed.

Supply and fixing in replacement of Ceiling rose, surface Bakelite three terminals complete all as directed.

Supply and fix in replacement of sheet metal enclosure for TPN DBs double door when MCB's to be used Triple pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fixing Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning all as directed by Engr-in-Charge.

Supply and fixing Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning all as directed by Engr-in-Charge.

Supply and Fixing only in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix in replacement of Air circulator PVC body 250 mm sweep, 220V, 50 Hz including all connection complete all as sprecified and directed by Engr-in-Charge, Make usha or equivalent.

S&F LED bulk head light fitting 1x9watt 230 volt attractive wall/ceiling mounted any type with white reflactor complete with all accessories pre-wired and including connecting up with twin core twisted flaxible copper conductor cable complete all as directed.

S&F Sub main wiring with two run of 6 Sqmm (2x 6 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6 Sqmm (1x 6 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down old existing sub maind wiring complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x 6 Sqmm), one run of 6 Sqmm (1x6 Sqmm) cable and one metre of PVC casing caping will be measured as one unit.

S&F Modular Bell push 6A 1 module complete all as directed by EIC.

S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as directed by EIC.

S&F Ultra Slim 36 W Slim Panel 2 Ft x 2 Ft recess mounted light complete all as directed by EIC.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 of MES plate No. 6 and all as specified.

Supply and laying in replacement of XLPE insulated, armoured, haeavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 35 Sqmm 3.5 core core laid in trences or passing through pipes.ducts or fixed to walls/poles completer all as specified.

M&L for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying UG cavble in trenches on plan and n exc 1.5 m in depth in any type of soil and getting out all as specified and directed by Engr-in-Charge.

M&L for Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m, complete all as specified.

M&L for Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point, complete all as specified.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified. Note : Punned thickness of 18 CM will be measured and paid for.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flate size 250mm x 150mm x 40mm, complete all as specified and directed

Supply and laying of MCCB 3 Pole 415 V fixed type 100 Amp with breaking capacity 16KA complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of lamp holder insulated body with back plate complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of Socket out let 2 in 1, 5 pin 6 Amps flush type.230 volts complete all as specified and directed by Engr -in-charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of Air circulator PVC body 300 mm sweep complete all as specified and directed by Engr -in-charge. Make usha/Bajaj/Orian.

Supply & Fixing in Replacement of LED light fitting 1X9 W/ 1X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make-Havells/ Crompton/ Bajaj.

Supply& fixing, connecting and testing street light LED type suitable for working on 230 volts, 50 Hz, AC of 60 Watts complete including Bracket, fixing, clamp all as specified and directed by Engr- in-charge

S& F Street light brackets 1.5 mtr long, 40 mm bore, GI light grade with MS clamps

S & F PVC insulated, PVC sheathed copper conductor cable 1.5 sqmm 3 core

Supply and laying in replacement of XLPE insulated, armoured, haeavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 2.00 core core laid in trences or passing through pipes.ducts or fixed to walls/poles completer all as specified.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 ways all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300MM complete as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, NRV, connection piece etc.thermostate,

M/S Praveen Kumar and Sons

M/s Koul & Sons

N K BUILDERS

M/S NANCY ENTERPRISES