CA NO CWEK/TOKEN-107/969 EWS/2025-26

Amount

Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F 0.63 mm thick, galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 grams per square metre complete all as specified and directed.

All as per ser item No.2 here-in-before but except sheeting. Note: Serviceable sheets retrieved from item No 01 shall be reused.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof wall etc complete all as specified and directed.

S&F 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 grams per square metre complete all as specified and directed.

All as per ser item No.5 here-in-before but except sheeting. Note: Serviceable sheets retrieved from item No 01 shall be reused.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws as complete all specified and directed.

All as per ser item No.7 here-in-before but except sheeting. Note: Serviceable sheets retrieved from item No 01 shall be reused.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per ser item No.9 here-in-before but except sheeting. Note: Serviceable sheets retrieved from item No 01 shall be reused.

Levering up edges of old plain or corrugated sheets (end or side) fixed to wood or steel framing, inserting end or side edge of new (sheet supplied by the M.D. for fixing only) and nailing, screwing, bolting or riveting including making good the joint between old and new sheets. (Not to be allowed for work measured as in patches) complete all as specified and directed.

Closing bolt holes etc. in old corrugated steel sheets or aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed.

M&L raking cutting and waste to hips, valleys etc complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 1.25mm thick and 150mm dia mild steel sheet eaves gutters, galvanised class 3, half round with rounded edge complete all as specified and directed.

S&F 1.25mm thick and 150mm dia angles (internal or external) or nozzle pieces (outlets) complete all as specified and directed.

S&F 1.25mm thick and 150mm dia drop ends (for spigot or socked ends) or nozzle complete all as specified and directed.

S&F 1.25mm thick and 150mm dia stop ends (for spigot or socked ends) complete all as specified and directed.

M&L preparing new zinc (or galvanized) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer on steel surface complete all as specified and directed.

M&L preparation of old painted zinc or galvanised surface of any description and in any position and applying one coat of synthetic enamel paint complete all as specified. Note:-(a) The surface of corrugated steel sheeting shall be measured flat (not girth) without any extra allowance for laps and the area obtain shall be increased by 14%. (b) The surface of plain steel sheeting as in ridge, hips, valley gutters, flashings etc, shall be measured flat alongwith girth (length and firth as fixed) and the area obtained shall be added to the area of corrugated steel sheeting complete all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed.

M&L 2nd class soft wood (Kail) as in scantling, clean sawn timber framed and fixed, complete all as specified and as directed.

All as per ser item No 22 here-in-before but except timber. Note: Serviceable timber retrieved from item No 21 here-in-before shall be reused.

Dismantling timber scantling in fillets rails, posts purlins etc under 40 Sqcm in section in framed work complete all as specified and as directed.

S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed.

S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area exceeding 6 Sq.cm but not exceeding 13 Sq. cm complete all as specified and directed.

S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area exceeding 3 Sq. cm but not exceeding 6 Sq.cm complete all as specified and directed.

S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm complete all as specified and directed.

S&F in repair or refixed in same position second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm complete all as specified and directed.

S&F in repair or refixed in same position Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed.

M&L for 2nd class soft wood clean sawn Jaffri of 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed including dismantling or trellis work (Jaffri) including taking as under of battens in trellis (post and rail measured separately complete complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed.

M&L for in repairs 4 mm thick veneered decorative ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on wall etc. complete all as specified and directed.

M&L for in repairs 4mm thick veneered decorative ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, ceiling panelling etc.complete all as specified.

M&L for 6 mm thick veneered decorative ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc.complete all as specified and directed.

M&L for 6 mm thick veneered decorative ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, wall panelling etc. complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 2nd class soft wood 20 mm thick in facia boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

S&F 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified & directed

S&F 2nd class softwood weather boarding clean sawn in repairs to replace old or decayed boarding in patches, including cutting out old, piecing, heading joints etc and removing dismantled boarding to store, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified & directed

M&L of softwood 2nd class boarding, supplied & fixed with nails in any situation (except flooring and skirting) planed one side and edges tongued and grooved or rebated on wall of 10-15mm complete all as specified and directed.

M&L of 10-15mm thick softwood 2nd class boarding, supplied & fixed with nails in any situation (except flooring and skirting) planed one side and edges tongued and grooved or rebated on ceiling complete all as specified and directed.

M&L of 25mm softwood 2nd class boarding, supplied & fixed with nails in any situation ( flooring and skirting) planed one side and edges tongued and grooved or rebated on wall complete all as specified and directed.

Beads, staff beads, flutes, reeds, exc 3mm but n. exc 75mm girth on softwood complete all as specified and directed.

Drilling holes exc 30mm but not exc 50mm round, drilled or cut in soft wood complete all as specified and directed.

M&L preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new work with two or more coats complete all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old surface work with two or more coats complete all as specified and directed.

Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high complete all as specified and directed.

Stop, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick cement concrete of 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L PCC 1:3:6, type B-1 (using 12.5mm graded stone aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5 graded stone aggregate) as in floors finished even and fair complete all as specified and directed.

M&L for light shade vitrified tiles tiles 10 mm thick (square/rectangular) area of each tile exc 0.42 Sqm but not exc1.00 Sqm in floors set and jointed over and including cement screed bed 15mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm. in floors set and jointed over and including cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specified complete all as specified and directed by Engr-in-Charge.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc.15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 100 mm thick cement concrete of 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for dark shade vitrified tiles tiles 10 mm thick (square/rectangular) area of each tile exc 0.42 Sqm but not exc1.00 Sqm in floors set and jointed over and including cement screed bed 15mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for light shade non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm. in floors set and jointed over and including cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for mirror polish machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F glazed ceramic white tiles 7mm thick 450mmx300mm / 300mmx600mm /600mmx1200mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick plastering with CM 1:4 complete all as specified and directed.

S&F glazed ceramic coloured tiles 7mm thick 450x300/300 x600/ 600 x 1200mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick plastering with CM 1:4 complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over and including cement screed bed 15mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for marble Makrana white tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone including cutting and polishing types over and including cement screed bed 15mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

M&L for raking, cutting and waste on glazed tiles complete all as specified and directed.

M&L for circular cutting or notching and waste on glazed tiles complete all as specified and directed.

Boring holes through glazed tile lining for pipes etc n.exc 50mm dia and making good complete all as specified and directed.

Demolition of brick work or stone masonry of any type built in cement mortar in foul condition etc complete all as specified and directed.

M&L brick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified and directed.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Walling for random rubble masonry, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

M&L for rendering 20mm thick in CM 1:4 on fair faces of stone masonry or concrete surfaces finished even and smooth complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M&L rendering 10mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L preparation of old surface including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint on old plastered or un-plastered surface of walls complete all as specified and directed.

M&L for preparation of undecorated surfaces of walls and applying two coats of cement base paint of approved tint, complete all as specified and directed.

M&L for providing and applying plaster of Paris putty of 1mm thick over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of undecorated surfaces of walls and applying two coats of Oil bound distemper paint of approved tint over a chalk whitening on plastered surface, complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking of shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

S&F 2nd class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class 30 mm thick soft wood (Kail) glazed skeleton shutters open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkhats size of members of shutters as specified in SSR Part - I section 8 clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, complete all as specified and directed.

MS cold rolled butt hinges medium weight 75 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 150 mm long complete all as specified and directed.

S&F aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and directed by Engineer-in-Charge

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 2nd class soft wood 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood glazed skeleton shutters open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkhats complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F MS cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

S&F 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 300 mm long size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminium anodised handles, cast type anodised 150mm long complete all as specified and directed.

Hacking out old broken glass from wooden/metal frame of any thickness including punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and directed.

M&L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed.

All as per item No 104 here-in-before but pin head type, figured glass complete all as specified and directed.

M&L 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

M&L decorative laminates type 1 or surface glossy finish, colour and pattern as approved by GE complete all as specified and directed.

S&F brass drawer pulls handles, 4 screw plate of 80mm to 100mm long complete all as specified and directed.

S&F extruded brass shutter pulls handles 150mm, fabricated type polished bright in repair complete all as specified and directed.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc complete all as specified and directed.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc. complete all as specified and directed.

S&F 15mm bore medium grade GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified and directed.

S&F 20mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified and directed.

Lagging to 15mm pipes used in inter water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144kg/Cum conforming to IS 9842, provided with chicken wire mesh wire netting 25 gauge 20mm mesh and 0.01mm aluminium foil complete all as specified and directed.

Lagging to 20mm pipes used in inter water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144kg/Cum conforming to IS 9842 provided with chicken wire mesh wire netting 25 gauge 20mm mesh and 0.01mm aluminium foil complete all as specified and directed.

Cutting chases on brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Cutting holes into or through brick in superficial area of walls not exc 15 sqcm built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F in repairs 1000 ltrs capacity rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repairs 500 ltrs capacity rotational moulded polyethylene in white coloured triple layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) etc complete all as specified and directed.

S&F in renewal of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe etc complete all as specified and directed.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F vitreous china squatting pan "Orissa pattern" size 580mmx440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, etc and to flushing pipe 90 mm long, antisyphonage pipe, etc, complete making good to floor complete all as specified and directed.

S&F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F vitreous china wash hand basin with pedestal, white, flat back size 550mmx400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed.

S&F in repair 15 mm bore angular stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F central hole basin mixer brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water for 15mm dia bore pipe fixed in repair complete all as specified and directed.

S&F of bib tap chromium plated in repair of 15 mm dia bore, screwed for iron pipe, or for brass ferrule complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F 125mm dia CP grating doom with/without waste hole (minimum weight 40 gms) complete all as specified and directed.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft and loose soil complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm of loose and soft soil all as specified.

Removing excavated materials n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up 150mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement laid in trenches including all fittings & accessories complete all as specified and directed.

M&L reinforced concrete pipes 150mm dia, class NP3, laid and jointed with collars complete all as specified and directed.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc complete all as specified and directed.

S&F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete all as specified and directed.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified and directed.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified and directed.

M&L cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm complete all as specified and directed.

M&L cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 110mm complete all as specified and directed.

Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends necks etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Bends with access door etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Bends with access door etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal of unequal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal complete all as specified and directed.

M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement complete all as specified and directed.

M&L for providing, precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weathering, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed.

S&F aluminium (Die cast body) Door closer hydraulically regulated designated No 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80kg and fixed complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light. Fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. to match with existing surfaces complete all as specified and directed.

M&L for point wiring in PVC casing capping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqmm including clamps, screws gutter/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor One light point/fan point/Ex fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per ser item No 169 here-in-before but one 3 pin 5 Amp switch socket outlet on independent board

All as per ser item No 169 here-in-before but one 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing capping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws gutter/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor complete all as specified and directed.

S&F switch piano flush type, single pole, one way 6 Amps 240 Volts, complete all as specified and directed

S&F switch piano flush type, single pole, 15 Amps 240 Volts, complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and directed.

S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as specified and directed.

S&F in repairs distribution board, SPN 8 Way, double door complete all as specified and directed.

S&F in repairs MCB,DP 40 Amps 240 Volts B curve, complete all as specified and as directed.

S&F MCB single pole 6-32 Amps 240 Volts B curve complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed.

S&F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

S&F LED bulb 12 W, 220V suitable size from ceiling rose all as specified and directed

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F lamp holder, PVC/ polycarbonate type with back plate suitable for batten fitting complete all as specified and directed

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S&F in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan complete all as specified and directed by Engr-in-Charge.

S&F ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300m complete all as specified.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of 16 sqmm size complete all as specified.

M&L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as specified and directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm and 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I-2009 including necessary excavation and earth work in any type of soil PCC 1:3:6, type C1 chamber with RCC 1:2:4, type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and directed by Engr-in-Charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc

M/S RATHER CONSTRUCTION CO (BID ID -3462072)

m/s mohd saleem and co (BID ID -3464464)

M/S SUMJI BROTHERS (BID ID -3462469)