Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAdmitted-Finance | ₹5.0 L | L1 | Admitted-Finance |
| 2 | L2₹5.0 L+₹5,900 (1.18%)Admitted-Finance | ₹5.0 L+₹5,900 (1.18%) | L2 | Admitted-Finance |
| 3 | L3₹5.1 L+₹8,400 (1.69%)Admitted-Finance | ₹5.1 L+₹8,400 (1.69%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S BIDUR CHINGAKHAM ENTERPRISES L1 | M/s Manojchandra Ahongsangbam L2 | M/S LAISHRAM SANATOMBA SINGH L3 |
|---|---|---|---|---|---|---|
| 1.00SCHEDULE ‘A’ PART - I (REPAIR OF BLDG) | ||||||
| 1.01 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet | 380 | Sqm | 19,000 ₹19,000 | 17,100 ₹17,100 Lowest | 22,800 ₹22,800 |
| 1.02 | Labour only for fixing only precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 376 | Sqm | 75,200 ₹75,200 | 75,200 ₹75,200 | 56,400 ₹56,400 Lowest |
| 1.03 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | 60 | RM | 27,000 ₹27,000 Lowest | 31,380 ₹31,380 | 31,380 ₹31,380 |
| 1.04 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) | 75 | Sqm | 2,62,500 ₹2,62,500 Lowest | 2,64,000 ₹2,64,000 | 2,70,000 ₹2,70,000 |
| 1.05 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes (weights not less than 10 kg/ sqm) | 5.72 | Sqm | 5,720 ₹5,720 Lowest | 5,720 ₹5,720 Lowest | 5,720 ₹5,720 Lowest |
| 1.06 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | 480 | Sqm | 1,08,480 ₹1,08,480 Lowest | 1,10,400 ₹1,10,400 | 1,20,000 ₹1,20,000 |
| 2.00Note : 1. Totalwise evaluation will be carried out to obtain L1. 2. Total Amt is inclusive of all applicable taxes. | ||||||
Tender Value
₹5.0 L
EMD Value
₹10,000
Closing Date
13 Jun 2026, 12:30 pmClosed
SO1 (Wks), HQ 26 Sect AR
HQ 26 Sect AR, Pallel, Manipur.
Repair/maint and changing of CGI roof and painting of old CGI sheet roof at COBs of 21 AR Modi.
2026_ARMHA_911090_1
SPR/ENGR/MW/2026-27/18
Open Tender
Civil Works
Works
90 days
Modi
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
DIGAR, HQ 26 Sect AR
₹10,000
Yes
29 Jun 2026
2 Jun 2026
15 Jun 2026
2 Jun 2026
13 Jun 2026
2 Jun 2026
2 Jun 2026 - 13 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SCHEDULE ‘A’ PART - I (REPAIR OF BLDG) | |||||
| 1.01 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet | 380 | Sqm | - | - |
| 1.02 | Labour only for fixing only precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 376 | Sqm | - | - |
| 1.03 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | 60 | RM | - | - |
| 1.04 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) | 75 | Sqm | - | - |
| 1.05 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes (weights not less than 10 kg/ sqm) | 5.72 | Sqm | - | - |
| 1.06 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | 480 | Sqm | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
BOQ_957521.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .