Renovation of Malikpur Rest House in Bazidpur Water Services Sub Division, Karnal

Amount

Works Details

Dismantling of tile tracing as per HSR 8.5 (a)

Distmantling lime concrete as per HSR 8.6 (a)

Scraping lime plaster as per HSR 8.32 (b)

CC 1:4:8 with stone aggreegate 40 mm nominal size in 1st storey upto 4 mtr. above plinth level HSR 10.57

Providing & fixing vitrified tile 600mmx600mm approved make like NITCO,KAJARIA, SOMANI, ORIENT, JOHNSON & RAK in flooring as per HSR 14.89

P/F ceramic tiles 400mmx400mm in flooring approved make like NITCO,KAJARIA, SOMANI, ORIENT, JOHNSON & RAK as per HSR item No. 14.91

Providing & fixing Skiriting 600mmx600mm approved make like NITCO,KAJARIA, SOMANI, ORIENT, JOHNSON & RAK as per HSR 14.90

Providing & fixing Ist quality ceramic glazed wall tiles confirming to I.S 15622 approved makein all color as per HSR 14.92 (a)

Terracing consisting of 19mm thick heat resistant tiles for roof insulation 300mmx300mm laid on 20mm thick 1:3 cement coarse sand mortar as per HSR 13.97

12mm thick cement plaster 1:4 as per HSR 15.5

Cement poiniting 1:2 deep variety on brick & tile work as per HSR 15.60

First class brick work laid in cement sand mortar 1:4 in F&P as per HSR 11.4

Providing top Khurra 0.60x0.6 m for rain water pipe in 25mm thick C:C 1:2:4 over 50 mm thick C:C 1:8:16 as HSR item 13.51

Providing Bottom Khurra on ground level 1.2mx0.6m consisting of brick on edge laid in cement mortar 1:3 as per HSR item 13.57

Cement conc. 1:2:4 gola 10cm x10cm quadrant along junction of roof with parapet as per HSR item 13.64

P/F PVC rain water pipe 100 mm 6 Kg. pressure as per HSR item No. 13.89 (a)

P/F PVC bend100 mm ISI mark as per HSR item No. 13.90 (a)

P/F PVC false ceiling without grooves with 12mm to 15mm thick 600mmx600mm best quality mineral fibre tiles as per HSR item No. 13.92

Providing & Laying average 6mm thick POP coating as per HSR item No. 13.94

Preparation of plastered surface for oil bound distemper i/c sand papering the surface as per HSR item No. 16.52

Distempering with washable oil bound distemper of approved manufatire 2 coat over one priming coat on new work as per HSR item No. 16.58

Providing two coats of exterior acrylic emulsion point 1st quality as per HSR item No. 16.79 (b)

Dismentalling concrete reinforced cement concrete with cleaning & straightening and cutting of bars as per HSR 8.6 (e)

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chhajjas, shelves etc. as per HSR 9.1

Cutting chase in brick wall in cement or in floor embendding as per HSR 30.95 (a) size 75mmx75mm

C:C 1:2:4 with stone aggregate 20 mm nominal size F&P HSR 10.41

Dressing bed and preparation of subgrade as per HSR 19.1

P/L 60mm thick interlocking paver blocks as per HSR item No. 10.158

RCC 1:2:4 with stone aggregare 20 mm nominal size for reinforced concrete work as per HSR 10.87

FE 500 EQR IMT steel bars for RCC works, where not included in the compete rate of RCC including bending, binding and placing in position complete as per HSR item No. 18.22

Wrought iron & mild steel ladder framed grills, grattings etc. as per HSR 18.10

Earth work excavation in all kind of soil with lead 60 mtr. including all other allowances if any HSR item 6.2 (b) (i)

Excavation for pipeline running under pressure in trenches & pits in open area where disposal of surplus earth done along with the alignment if any HSR item 6.8

Constg. B.M. inspection chamber of size 450mmx600mm as per HSR item No. 29.84 (b)

Providing and fixing M.S. round or square bar at required spacing in wodden frame of windows as per HSR 18.40(a)

Removing wooden doors & windows with chowkhats HSR item No. 8.18 (a)

Removing wooden doors & windows with chowkhats HSR item No. 8.18 (b)

Removing wooden doors & windows with chowkhats HSR item No. 8.18 ©

Chowkhat of commercial hard wood such as hollock,champ, chikrassy and chaplash etc.as per HSR 17.12

Deodar planking planed on bothside rebated and fixed in position including nails and screws as per HSR 17.14 ©

Providing & fixing of sunmica on the planking of door and cupboard with fevicol including labour NS item

Providing & fixing deodar wood beading to door & window chowkhats with iron screws as per HSR item No. 17.52 (b)

Supplying & fixing glass panes with deodar wood moulding as per HSR 17.24 (a)

Wire gauze kailwood window & door shutter without springs housed in chowkhat including chocks iron hinges screw etc. as per HSR 17.26 a

Supplying & fixing hydraulic door closer ISI mark with necessary screw etc.as per HSR 17.82 (b)

Providing & fixing 65 mm x35mm special quality brass cup board locks, six levers of reputed firm as per HSR 17.85

Curtain rod 25mm dia with bracket, fixed in position including nails and screw etc. as per HSR 17.89 (b)

Supplying MS bolt of required sizes with nuts and washers complete as per HSR 18.15 (a)

Centring and shuttering for faces of wall partition, retining walls as per HSR 9.6

Preparation of plywood surfaces for painting including sand papering the surface as per HSR 16.1

Applying pink primer on wood works as per HSR 16.2

Painting two coat excluding priming coat with syntetic enamel paint in all shade as per HSR 16.3

Earthing with G.I. pipe 4.5m long & 40mm dia with masonry encloser on the top etc. as required HSR item No. 31.22 (i)

Extra for using salt & charcoal/cobe for pipe earth electrode as reqd. HSR item 31.22 (ii)

Pdg. & laying earth connections from earth electrode with 400mm dia G.I. wire in 15mm dia G.I. pipe from earth electrode as reqd. HSR item 31.22 (XII)

Installation of submersible pump for water supply including all special and complete in all respect NS item

Supply of G.I. Pipe 15 mm i/d N.S. Item

Laying of G.I. Pipe, labour for jointing, Fixing & testing and special tees bends, sockets albous complete i/c cuting threading as per HSR 28.18 (a) (i) 15mm internal dia.

Providing & fixing G.I. Pipe 20 N.S. Item

Laying of G.I. Pipe, labour for jointing, Fixing & testing and special tees bends, sockets albous complete i/c cuting threading as per HSR 28.18 (a) (ii) 20mm internal dia

Providing & fixing G.I. Union 15 mm i.e. N.S. item

Providing & fixing G.I. Union 20 mm N.S. item

Supply and fixing of PVC 32 mm pipe N.S Item

Providing & fixing Gate value 15 mm N.S. item

Providing & fixing Ball Cock N.S. item

Providing & fixing HDPE water storage tank of Sintex, Diplast, OK, Supreme make as per HSR item No. 30.119 1000 Ltr.

Providing & fixing in position with best quality stainless sink built in draining board of size 600mmx450mm complete as per HSR 30.59 (a)

Providing & fixing of Split AC coppr pipe underground fitting including material & labour charges (as per quotation attached)

Providing & fixing in position best indian make shower as per HSR 30.66 ©

Providing & fixing in position best indian make paper holder fixed into wall with CP brass as per HSR 30.67 (a)

Providing & fixing in position best indian maketowel rails fixed in with rawl slughs emmebeded in wall with CP brass as per HSR 30.68 (a) (i)

Providing & fixing in position glass shelf fixed in with rawl plugs as per HSR 30.69 (a) (i)

Providing & fixing in position best indian make soap dish fixed into wall as per HSR 30.70 (a) (i)

Providing & fixing in position best indian make bevelled edge 5.5 mm thick mirroras per HSR 30.71 (a) (i)

Providing & fixing in position 15mm i/d CP brass bib cock best quality as per HSR 30.75 (a)

Providing & fixing in position CP brass stop cock best quality as per HSR 30.76 (a) (i)

Providing & fixing in position liquid soap container as per HSR 30.77

Providing & fixing in position CP brass laboratory cock swan neck best quality as per HSR 30.78 (a)

Providing & fixing in position CP brass tooth brush cum tooth paste holder as per HSR 30.79 (i)

Providing & fixing in position best indian make flexible tube connection as per HSR 30.82(a) (i)

Providing & fixing in position best indian make CP brass inlet connection 15mm with 375mm pipe and CP brass nutsas per HSR 30.83

Providing & fixing in position automatic brass ball valves in tanks as per HSR 30.110 (a)(iv) 32 mm dia

Supply and erection of hot water pipe medium class B GI as per HSR 30.120 (a)

Providing & fixing best indian make europeon type water closet suit complete in all respect white color as per HSR item 30.5 a (i)

Providing & fixing in position best Indian make flat back or angular lipped front urinal as per HSR item No. 30.19 (iv) (i)

Providing & Fixing best Indian make lavatory suit 630mm x 450mm HSR 30.42 (iv)

Supply & erection of PVC unsheathed copper conducter cable single core 1100 volts grade in pipe of suitable size excl. cost & erection of pipe HSR item No. 31.40 (iii) Size 4.0 Sqm (7/0.85)

Cost of brass fittings complete for doors and windows such as tower bolt, handles etc. and screw for these fittings as per HSR 17.70 (a)

Providing & fixing 150mm floor brass door stopper, with rubber cushion, screw etc. as per HSR 17.75

Providing & fixing in postion HCI50 mm internal diameter outlet plain nanahi trap ISI marked as per HSR 30.90 (a)

Providing & fixing in postion HCI specials for soil waste, vent or antisyphonage pipes to ISI marked including cutting & wastage etc.as per HSR 30.91 (a) 20)

Laying and fixing granite stone in all shade 17mm thick in skirting as per HSR item No. 14.96

Supply & erection of metal clad swiches/B.D.Bs with rag botton wall or on exisiting angle iron board/pedesrtal i/c bounding to earth & connection HSR item 31.12 (b) VII

Supply & erection of double door sheet steel enclosure distributions board suitable for MCBS & ELCB set i/c bounding to earth with all labour & material reqd. to complete the job HSR item 31.41 (vi)

Supply & erection of miniature circuit breaker/isolator 240/215 v in the esisiting distribution board i/c making necessary connection HSR item 31.17 (a) (ii)

Supply & erection of MS angle iron frame duly welded for housing M.S. sheet & main switches etc. on it fixed on wall by means of suitable size of rag bolt with cement conc. Duly painted with three HSR item 31.13 (a) (ii)

M.S. sheet as per HSR itemNo. 31.14 (i)

Supply & erection of sheet stell enclosure 2 pole/3pole with earth plug & socket sutibale for incorporation single pole/tripal pole MCB on wall HSR item 31.15 (ii)

Supply & erection of fittings & accessories HSR item 31.18 (Vii) Call bell 220/230 volt A.C. balelite with double coil HSR item 31.18 (Vii)

Bell push with 4 Mtr. 2-core 0.50 Sqm (16/0.20mm) PVC Flexible wireHSR item 31.18 (IX)

Swich 5 amp. On exisiting sheet HSR item 31.18 (Xii)

Wall socket 5 amp. On exisiting sheet HSR item No. 31.18 (XIII)

Erection only of 1x40 walts or 2x40 walts 1220mm long/1x20 watts or 2x20 watts 610mm long luarescent tube fitting directly on wall i/c necessary connection with 0.75mm PVC Copper flexible cable for connecting tube with the adjacent point HSR item 31.18 (XXiV)

Erection & carrige of fans HSR 31.20 Erection of celling fan complete with necessary earthing etc. HSR item 31.20 (i)

Laying pipe:- Supply & erection ofPVC pipe ISI marked for wiring purpose i/c bends inspection box etc. where necessary & pointing as required HSR item No. 31.58 (32mm dia pipe)

Supply & erection of PVC unsheathed copper conducter cable single core 1100 volts grade in pipe of suitable size excl. cost & erection of pipe HSR item No. 31.40(i) 1. Size 1.5 Sqm (3/0.81) HSR 31.40 (i)

2. Size 10 Sqm (7/1.35) HSR 31.40 (v)

3. Size 4.0 Sqm (7/0.85) HSR 31.40 (iii)

Wiring in 1.5 Sqmm PVC insulated copper conductor cable in 1.6mm th. Conduit pipe HSR item 31.36 1. Fan point (b) Medium Point

2. Light Point (a) Short

3. (b) Medium Point

4. ( c) Long point

Call bell point i/c MS box of size 180mm x100mm x60mm deep for call bell Medium Point

3Pin 15Amp. Plug point with 4 Sqm PVC insulated copper condutor cable i/c earthing the 3rd pin etc. (i) Medium Point

(ii) Long point

Supply & erection of socket size ratary step type electronic regulator for AC, ceiling fan. (HSR item No. 31.55)

Providing & fixing modular type accessories of approved make in existing box i/c fixing and making necessary connection complete in all respect (HSR iterm No. 31.56) (i) 10 Amp. 1 way switch

(ii) 20 Amp. Switch

(iii) 10 Amp. Socket

(iv) 16 Amp. Socket

(v) Bell push

(vi) Call Bell ding Dong

(vii) Fan regulator

Providing & fixing G.I. conealed sheet metal boxes with inner and outer face plate i/c concealing the box in wall & fixing in position with inner plate and face plate with all labour and material reg. (HSR item No. 31.57) (i) 4 Modules

(ii) 6 Modules

Dismantling old wiring points (not recessed) i/c necessary repair to wall etc. HSR item No. 31.35 (Xii) (i) Light, Fan or Call bell Point

(ii) Wall socket point

Supply & erection of fittings & accessories as per HSR item No. 31.18(xi) (i) Bakelite angle/straight holder large size

(ii) Ceiling rose flush/surface type 31.18(xvii)

Supply of lock with handles for door NS item

Steel leg 6" side for bottom of cupboard NS item

Credit of item No.1 Street Light

Supply & Erection of PVC copper insulated and sheathed 2-core circular flexible wire. As per HSR Item No.31.9 (i) Size 1.50 Sqmm (48/0.20mm)

Supply and errection of Godrej Almirah type M.S. pedestal made of 50mm x 50mm x 6mm angle iron frame with 3mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars etc. M.S. pedestal of size 600 mm wide, 750 mm high, 300mm deep and bottom totally open duly embeded in cement concrete block of size 750mm x 450mm x 250mm above ground level etc. As per HSR item No. 31.33 (i)

Supply and erection of miniature circuit breaker/isolater 240/415 V in the exisitng distribution board including making necessary conncections. Miniature circuit Breakers of 9 K.A. breaking capacity 40amp. To 63 amp As per HSR item No. 31.17 a (iii)

Supply and erection of under ground cable etc. As per HSR item No. 31.26 (xxxix) 10 sqmm 4 Core Cable

Supply and erection of under ground cable etc. As per HSR item No. 31.26 (xl) 16 sqmm 4 Core Cable

Supply & Erection of suitable compression type brass cable glands for underground Cable. 25sqmm to 50 sqmm Cable 2 to 4 Core. As per HSR item No. 31.28 (ii)

Supply & erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satoisfaction of the Engineer-in-charge of the work. As per HSR item No. 31.41 (i) 4-way, SP&N (Horizontal)

Supply & erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. As per HSR item No. 31.68 (i) 7 mtr long pole with top dia 70mm and bottom dia 130mm with base plate of size 220 x 220 x 12mm

S&E of single arms bracket made of 50mm dia GI pipe B class 0.75mm long with 25mm dia bottom pipe GI with collar pipe (GI) 100mm dia 60cm. Long withMS nipple as required for fixing of fitting duly welded at end of bracket top covered with ornamental cap duly welded painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and pelty material etc. complete in all respect upto the entire satisfaction of Engineer in charge. (N.S.)

Supply and erection of LED regular street light Luminiares minimum 45 W LED of makes Bajaj/Crompton/GE/Philips/Havell's/Surya with pressure die cast aluminium housing with lens and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-In-Charge of the work. (N.S.)

Supply and erection of moulded case circuit breaker on wall or on existing pedestal including bonding to earth and necessary connections etc. 15 amp to 60 amp. 415 V. 10K.S. 3 phase. As per HSR item No. 31.12 c (i)

S/E Mane double walled corrugated (DWC) HDPE pipe land 1 mtr. below ground level I/C digging and refilling of earth I/C cost of suitable size socket/copper for HDPE pipe I/C the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer Incharge HSR item No. 31.67 (i) HDPE pipe 63.50 mm outer dia/inner dia.

Credit of tile

The Quality Coop Society Ltd

The Jatin Coop. L and C Society Ltd.