Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹33.8 L+₹1.7 L (5.29%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹34.6 L+₹2.5 L (7.81%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹35.2 L+₹3.1 L (9.73%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹36.9 L+₹4.9 L (15.2%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹40.6 L
EMD Value
₹81,200
Closing Date
26 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
SPL REP TO GOVT MD ACCN BLOCK NO P 122 08 QTRS 06 SRW AT BAIRAGARH UNDER GE BHOPAL
2022_MES_548884_1
8926/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹81,200
Yes
9 Jan 2023
31 Aug 2022
28 Sept 2022
31 Aug 2022
26 Sept 2022
14 Sept 2022
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
S&F in Window ECO 4000, of double rebate openable/fixed window made of galvanised steel colour coated/powder coated (base steel as per IS 513 Of 'D' quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and S. S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in the Concrete/Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) etc complete all as specified and directed. Make : NCL Alltek and seccolor LTD or equivalent as approved by GE.
Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws.
S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.
S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.
S & F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F for 40mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides
S&F 35mm thick second class hard wood glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed.
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.18 mm and fixed with tinned tacks, or galvanised wire staples fixed complete all as specified and directed..
S&F for IInd class hard wood plain, solid, straight chowkats and frames, wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and directed.
M&L in repairs 18/19mm thick block board, grade 2 quality, interior grade, commercial type, fixed with screws/nails to timber frame work including taking down old board complete all as specified and directed.
S&F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
M&L 6mm thick lipping for external teak wood on veneered particle board or block board fixed with nails complete all as specified and directed.
S&F100mm hasp and staple, safety type, anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed
S&F 40mm dia cupboard knobes fixed with nuts, screw and washer of MS, bright finshed, complete all as specified and directed
S&F 100 mm mild steel butt hinges medium weight, cold rolled complete all as specified and directed
S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed
S&F 150 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed
S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed
M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L preparation of old wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
S&F in repairs 25mm dia curtain rails, stainless steel with fixing brackets, stops rollers etc complete all as specified and directed..
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for granite (any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.
M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landing, beams, chajjas and similar work not exceeding 200 mm thick (Horizontal/Sloping) receive for fair finished surfaces complete all as specified and directed.
M&L for Mild steel TMT Bar 6 to 8mmm dia cut to length, bent to shape to required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild seel wire (anneled) not less than 0.9mm dia or securing with clips quality confirming all as specifed and directed.
M&L for reinforced cement concrete (nominal mix) using 20mm graded aggregate Type B1 1:2:4 on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.
Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick(below or above GL) incl tiling if any complete all as specified and directed
M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4, type B-1 (20 mm graded aggregate) for sub base of floor, complete all as specified and directed
M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in pointed in white or coloured cement to match tile to match the colour of tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.
M&L for joint free coloured designer flooring tiles 10 mm thick (Square/rectangular) polished, heavy duty, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. .
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.
Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 all as specified and directed.
Taking down cement plaster on brick or concrete surfaces, including racking out joint, hacking for key, scrubbing down with water complete all as specified and directed.
M&L15 mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed
M&L 15 mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed.
M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Putty shall be measured and paid for seperately under respective item.
M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Putty shall be measured and paid for seperately under respective item.
M&L for applying one coat of 3mm thick white wall care putty on walls complete all as specified and directed. Make- Birla / JK putty
Preparing new plastered or un-plastered surfaces of wall and M&L for applying two coats of exterior acrylic emulsion weather coat paint, white or tinted complete all as specified and directed. [Make:- Apex Ultima Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- (a) 3mm thick wall care cement putty where ever required shall be measured & paid separately. (b) The work of applying exterior acrylic emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (c) A Guarantee of 5 yrs from the certified date of completion for the effectiveness of exterior acrylic emulsion weather coat paint shall be submitted by the manufacturer and contractor. (d) A Security deposit @2.5% of the amount of treatment shall be deposited by the contractor for the entire guarantee period i.e. 5 yrs in the form of FDR in favour of GE. (e) During the guarantee period if exterior acrylic emulsion weather coat paint gets removed or becomes layered contractor shall rectify or replace (at his option) defective materials at his own expenses, when called upon in writing to do so by the GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work.
Complete removal of existing treatment on walls (any number of layers) by scrapping including filling holes, cracks, depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of exterior water base emulsion paint, white or tinted complete all as specified and directed. [Make:- Apex Ultima Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- .(a) The work of applying exterior emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (b) A Guarantee of 5 yrs from the certified date of completion for the effectiveness of exterior acrylic emulsion weather coat paint shall be submitted by the manufacturer and contractor. (c) A Security deposit @2.5% of the amount of treatment shall be deposited by the contractor for the entire guarantee period i.e. 5 yrs in the form of FDR in favour of GE. (d) During the guarantee period if exterior acrylic emulsion weather coat paint gets removed or becomes layered contractor shall rectify or replace (at his option) defective materials at his own expenses, when called upon in writing to do so by the GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work..
M&L for preparation of newly plastered or unplastered surface of ceiling and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed.
M&L for complete removal of existing treatment from ceiling and applying two coats of oil bound distemper over a coat of cement based putty (where required) complete all as specified and as directed.
S&F in repairs sink made of stainless steel 1 mm thick kitchen or laborary with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm including 40mm CP waste coupling and waste pipe complete all as specified and directed.
S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and directed.
S&F in repairs 15 mm bore stop cock (angle valve), cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.
S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (concealed type), screwed down, screwed for iron pipe or union complete as specified and directed.
S/F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.
S&F in repairs vitreous china wash basin, white flat back size 550X400mm including CP waste coupling, PVC waste pipe and brackets fixing in position complete all as specified and directed
S&F in repairs 15 mm pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified & directed
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.
Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F in repairs 32mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm for WHB/ kitchen sink complete all as specified and directed.
S&F in repairs vitreous china squatting pan "Orissa Pattern" size 580mm x 440mm white with integral foot rests, including prov of cement concrete bedding and 'P' or 'S' trap as required complete all as specified and directed.
S&F in repair Grating round 140 mm size of PTMT. (Minimum weight 50gms) all as specified and directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in with excavated soil of any type including spreading, leveling, watering and well ramming in layers n exc 25 cm thick.
Removing excavated material exc 250 m and not exc 500 mtr and depositing where directed complete all as specified and directed by Engr-In-Charge.
M&L for precast cement concrete Type B1 1:2:4 (20mm graded aggregate) as in landings, cover slabs, precast man hole covers, set in CM 1:6 complete all as specified and directed.
Demolition and breaking up of 150 mm dia of drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
S&F Salt glazed stoneware drain pipes 150 mm bore, grade ‘A’, laid in trenches and jointed as specified complete all as specified and directed.
M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/floors complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 110 mm dia all as specified and directed.
S&F in repair PVC (SWR) bends any radius 75 mm dia all as specified and directed.
S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.
M&L framed work such as grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
S&F Steel work in tubular/structural trusses, purlins, etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed
S&F 75 mm mild steel butt hinges medium weight, cold rolled complete all as specified and directed
M&L APP base polymeric membrane (plain/gravel finish as per site requirement and as directed) minimum weighing 3kg/sqm and 3mm thick reinforced with polyester non-wove fabric (wt not less than 150gms/sqm) laid on bitumen 85/25 grade at the rate of 1.2 kg/sqm primer surface by forced application, including taking down of existing roof treatment any type, complete all as specified and directed
M&L for 10 mm thick plaster in CM 1:4 mixed with using integral water proofing compound @3% by weight of cement applied over roof slab, complete all as specified and directed. (Water proofing compound shall be measured and paid seperately)
Supply only liquid water profing compound complete all as specified and directed.
M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortor 1:3 all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L Providing Cement concrete Type B1, 1:2:4 (20mm graded aggregate) as in roof padding, kerbs or mud stops, copings and levelling concrete slightly rounded or chamfered angles and throating all as directed.
Dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed
S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed.
S&F in repairs 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
M&L for concealed point wiring for light point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade,ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories(PVC Casing and caping to be done wherever wiring to be run on ceilings and concrete surfaces including one run of 1.5 sqmm FRLS muti stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be conclead in wall, duly painted with two coates of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylum sheet cover, ISI marked of Make" Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per arroved colour code in IE rule. Rate includes chase cutting for concealed wiring
All as per item No. 101.00 here-in-before but for one fan Point controlled by one way switches, with cables 1.5 sqmm, complete all as specified and directed.
All as per item No. 101.00 here-in-before but for one bell Point controlled by one bell switches, with cables 1.5 sqmm, complete all as specified and directed.
All as per item No. 101.00 here-in-before, but for exhaust fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm, complete all as specified and directed.
All as per item No. 101.00 here-in-before but for one light point controlled by two 2 way switches, with cables 1.5 sqmm, complete all as specified and directed.
All as per item No. 101.00 here-in-before but for 3 pin socket outlet, 5 Amp on the same board with other switches, complete all as specified and directed.
All as per item No. 101.00 here-in-before, but for 3 pin 5 amp switch socket combination on independent board with other switch, complete all as specified and directed.
All as per item No. 101.00 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly, complete all as specified and directed. .
All as per item No. 101.00 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly, complete all as specified and directed. .
M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly, complete all as specified and directed.
M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly, complete all as specified and directed.
S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F Polycarbonate switch piano, flush button, single pole, one way 5 Amp, 240 volts ISI marked, complete all as specified and directed.
S&F Polycarbonate switch piano, flush button, single pole, two way 5 Amp , 240 volts ISI marked, complete all as specified and directed.
S&F Polycarbonate ceiling rose, surface type, 3 terminal, 240V , ISI marked, complete all as specified and directed.
S&F Polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type, complete all as specified and directed.
S&F with socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts, complete all as specified and directed.
S&F Polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked, complete all as specified and directed.
S&F Lamp holder, insulated body with back plate suitable for batten/angular fittings fixed, complete all as specified and directed.
S&F, Buzzer, Ding Dong AC. 230 volts, single pole, complete all as specified and directed.
S&F Polycarbonate bell push flush type, SP, 5 amp, 240V, complete all as specified and directed.
Taking down main switches/MCB DBs of any capacity/type including MCBs, complete all as specified and directed.
S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, double door with MCCB as incomer (Vertical type double door) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.
S&F MCCB 3 Pole, 415 V, fixed type,125 Amps with breaking capacity 36 KA, complete all as specified and directed.
S&F flush to wall, double door MCB DB, SPN 8 way, 240 volts grade, with 200 amps rated bus bar. of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete fitted on wooden board first class of suitable size complete all as specified and directed.
S&F MCB SPN 32 amps 10 KA, c-series including connection with suitable size aluminium / copper lugs complete all as specified and directed.
S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' curve including connection with suitable size aluminium / copper lugs complete all as specified and directed.
S&F ceiling fan 1200 mm sweep single phase AC 220 Volts 50 HZ, 3 blades double ball bearing and connecting including provision of 3 core flexible PVC insulated multi stranded copper conductor cable of size 0.5 Sq mm from ceiling rose/connector to fan, etc including GI down rod of appropriate length as per site requirement including taking down of old fan and depositing in AGE E/M store yard complete all as specified & directed.
Taking down old unserviceable sub main wiring of any size and any discription, complete all as specified and directed.
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.3 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed. Note: Unit rate of earthing deemed to be included with GI wire 4 mm, GI pipe light grade protection pipe 15 mm up to 7.5 RM.
Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.
S&F Electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH, complete all as specified and directed.
S&F Integral LED Street light luminaire of 45 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses LED street light luminaires with IP 65 protection and with all fixing arangement , nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole , testing and completion, complete all as specified and directed.
S&F exhaust fan with louvers made of iron body and MS sheet baldes AC Single phase 230/240 volts, 300 mm sweep, 900 RPM including cutting for making opening in wall and making good disturbed surfaces after fixing of exhaust fan and louvers including connection with 23/.0076 three core copper wire from ceilling rose to exhaust fan upto 1 mtr length complete all as specified and directed.
S&F and testing of electric water heater (Geyser) stationary storage type, closed / vented type, vertical, including inner container of copper, capacity 25 Ltrs, 240 volts, 2000 Watts with two PVC pipe Nylon braided (suitable for hot water), 15mm dfia CP fancy type stop cocks, for inlet and out let purpose, anchor fastner, nuts, bolts and washer etc, with power cable 6 Sqmm copper conductors complete all as specified and directed.
Supply and fixing of temperature resistent PVC connection pipe with brass hexagonal adaptor both sides suitable for HOT/COLD water, 15mm dia, not less than 60 cm long, suitable for incoming and outgoing water connections of Geyser with washers etc. complete all as specified and as directed.
S&F single pole and neutral enclosure with two pin and earth, plug and socket, suitable for single phase 240 V, complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed.
M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed.
Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed
Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 25 sqmm, 3.5 core, 1100 volts grade, laid in trenches, fixed to pole, passing through pipes/ducts, etc complete all as specified and directed.
S&F 40mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed.
Cutting of bituminous road/PCC hard standing/road/floor for laying of GI pipe upto 80mm dia (trench not more than 0.3m x 0.3m) for passing of cable including making good the disturbed surfaces all as per existing complete all as specified and directed.Note:-GI pipe shall be measured & paid separately under relevant items of this schedule.
Taking up or down 25 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 25 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Refixing old steel tubing 25 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.
Refixing old steel tubing 20 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.
S&F 25mm bore, Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe for the following bores including taking out old unserviceable valve complete all as specified and directed
S&F 20mm bore, Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe for the following bores including taking out old unserviceable valve complete all as specified and directed
M&L for Machine cut Kota stone slab flooring 18-20mm thick with and including 15mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 46,965.00
PADAMSHRI CONSTRUCTION CO
Samaksh Enterprises
M/S Shanti Traders
M/s VIKAS TRADERS
Adamya Group Of Company
Nakoda Constrcution Company
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .