Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 BIDDER | |
| 2 | L2₹51.6 L+₹2.0 L (4.14%)Rejected-Finance | L2 | Rejected-Finance REJECTED DUE TO L2 BIDDER | |
| 3 | L3₹52.2 L+₹2.6 L (5.33%)Rejected-Finance | L3 | Rejected-Finance REJECTED DUE TO L3 BIDDER | |
| 4 | L4₹52.4 L+₹2.9 L (5.80%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L4 | Rejected-Finance REJECTED DUE TO L4 BIDDER | |
| 5 | L5₹52.8 L+₹3.2 L (6.53%)Rejected-Finance | L5 | Rejected-Finance REJECTED DUE TO L5 BIDDER |
| Sl No | Description | Qty | Unit | M/S R N ENTERPRISES L4 | M/S SM ANSARI L2 | M/S N D ENTERPRISES L5 | M/S PREM THILLEY L1 | M/S ASHOK CONSTRUCTION L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting and dismantling carefully the existing inlet,outlet,wash out and over flow pipes, MS sheet, PS plate of any size and thickness, MS structural steel of any section from the existing PS Tank of capacity 20000 to 30000 Gln including unbolting nuts bolts and washer where ever required from existing PS tanks and making by pass arrangement to continue existing water supply by using GI tubing ,valves and fittings etc, of required sizes and taking out the said arrangement after completing the work all as directed. (Note : cost of by pass arrangement shall deemed to be included in quoted rate)
Locations :- Rupa water point -02 Nos , 405 FD Hospital -02 Nos , Gachham water Point - 01 Nos ) | 5 | Each Job | 80,400 ₹4,02,000 | 80,000 ₹4,00,000 Lowest | 81,000 ₹4,05,000 | 80,000 ₹4,00,000 Lowest | 81,000 ₹4,05,000 |
| 2.00 | M/L for cleaning of PS storage tank of capacity 10000 to 15000 Gln upto 10 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed.:
(Locations:- Rupa water Point - 01 , Gachham wate point - 01 Nos, 2 Dogara - 02 Nos , 405 FD Hospital -02 Nos ) | 6 | Each Job | 7,200 ₹43,200 | 7,000 ₹42,000 Lowest | 7,300 ₹43,800 | 7,000 ₹42,000 Lowest | 7,700 ₹46,200 |
| 3.00 | M/L for cleaning of PS storage tank of capacity 20000 to 30000 Gln upto 10 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed.:
( Locations:- Rupa water Point - 02 , Gachham wate point - 04 Nos, 2 Dogara - 01 Nos , 1 st Mahar - 03 Nos ) | 10 | Each Job | 8,100 ₹81,000 | 8,000 ₹80,000 | 8,200 ₹82,000 | 7,250 ₹72,500 Lowest | 8,600 ₹86,000 |
| 4.00 | M/L for cleaning of PS storage tank of capacity 40000 to 50000 Gln upto 10 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed.:
(Locations:- Rupa water Point - 01 Nos ) | 1 | Each Job | 10,400 ₹10,400 | 10,000 ₹10,000 | 11,000 ₹11,000 | 9,000 ₹9,000 Lowest | 11,000 ₹11,000 |
| 5.00 | Dismantling carefully the existing MS sheet of any size and thickness, MS structural steel of any section from the existing PS Tank of capacity 20000 to 30000 Gln including unbolting nuts bolts and washer where ever required from existing PS tanks
(Locations, 405 FD Hospital - 02 Nos , Gachham water Point - 02 Nos , 1 st Mahar water point - 01 Nos) | 5 | Each Sheet | 1,200 ₹6,000 Lowest | 1,200 ₹6,000 Lowest | 1,300 ₹6,500 | 1,200 ₹6,000 Lowest | 1,300 ₹6,500 |
| 6.00 | Fixing only old serviceable PS plate of any size and any thickness for side or bottom plate of PS tank, fixing with new or old serviceable nuts, bolts and all new jointing materials such as lead wool gasket, black non toxic putty etc complete all as specified and directed. (All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only). | 250 | Each | 1,800 ₹4,50,000 Lowest | 1,800 ₹4,50,000 Lowest | 1,800 ₹4,50,000 Lowest | 1,800 ₹4,50,000 Lowest | 1,840 ₹4,60,000 |
| 7.00 | Supply and fix MS plate 6 mm thick as per existing size for bottom and side of the PS tank upto 10 mtr height from the ground pre fabricated, factory made including drilling holes, welding cutting etc fixing with new nuts, bolts and washers and all new jointing materials such as lead wool gasket black non toxic putty etc complete all as per specified and direted by Engr In Charge. (Rupa Water Point PS Tank - 65 Nos Plate @ 74 Kg/Each, size 1.25x1.25x6mm) | 4,875 | Kg | 288 ₹14,04,000 | 280 ₹13,65,000 | 300 ₹14,62,500 | 278 ₹13,55,250 | 230 ₹11,21,250 Lowest |
| 8.00 | Fixing only old serviceable MS sheet joint as in cover of PS tank up to 10 Mtr Height including cutting, drilling hole etc fixing with new or old serviceable nuts, bolts and washers etc complete all as specified and directed, (All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only).
Rupa water point -02 x 9 Nos , 405 FD Hospital -02 x 7 Nos , Gachham water Point - 01 x 8 Nos ) | 42 | Each Sheet | 2,100 ₹88,200 | 2,000 ₹84,000 | 2,000 ₹84,000 | 1,950 ₹81,900 Lowest | 2,300 ₹96,600 |
| 9.00 | Supply and fix 3.15 mm thick MS sheet joint as in cover of PS tank as per existing size for roof of the PS Tank including cutting, drilling hole etc fixing with new or old serviceable nuts, bolts and washers etc complete all as specified and directed, (All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only).
(Locations, 405 FD Hospital - 02 Nos , Gachham water Point - 02 Nos , 1 st Mahar water point - 01 Nos Total -05 Nos Sheet @ 70 Kg/Each, size 2.44 Mtr x1.22 Mtr x 3.15 mm ) | 355 | Kg | 270 ₹95,850 Lowest | 270 ₹95,850 Lowest | 290 ₹1,02,950 | 270 ₹95,850 Lowest | 300 ₹1,06,500 |
| 10.00 | Fixing only old serviceable structural steel including cutting, drilling hole etc fixing with new or old serviceable nuts, bolts and washers complete all as specified and directed. (Note :All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only).
(Locations :- Rupa water point -02 Nos , 405 FD Hospital -02 Nos , Gachham water Point - 01 Nos) | 580 | Kg | 45 ₹26,100 | 45 ₹26,100 | 55 ₹31,900 | 42 ₹24,360 Lowest | 60 ₹34,800 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
22 Nov 2025, 9:00 amClosed
GE TENGA
GE TENGA PIN-790116 C/O 99 APO
REPAIR/REPLACEMENT OF WATER FILTRATION PLANT, CONTROL VALVES, PS TANK AND STAGING, FILTER MEDIA AND CONNECTED ITEMS AT PH-I (RUPA, GACHHAM, BIRPUR, DP, BOMDILA) OF E/M UNDER GE TENGA
2025_MES_727755_3
8043/E8
Open Tender
Civil Works
Item Rate
270 days
GE TENGA
PLS REF NIT
7 documents required · 7 mandatory
₹500
GE TENGA
₹96,000
Yes
7 Jan 2026
1 Nov 2025
24 Nov 2025
1 Nov 2025
22 Nov 2025
15 Nov 2025
Amount
Disconnecting and dismantling carefully the existing inlet,outlet,wash out and over flow pipes, MS sheet, PS plate of any size and thickness, MS structural steel of any section from the existing PS Tank of capacity 20000 to 30000 Gln including unbolting nuts bolts and washer where ever required from existing PS tanks and making by pass arrangement to continue existing water supply by using GI tubing ,valves and fittings etc, of required sizes and taking out the said arrangement after completing the work all as directed. (Note : cost of by pass arrangement shall deemed to be included in quoted rate) Locations :- Rupa water point -02 Nos , 405 FD Hospital -02 Nos , Gachham water Point - 01 Nos )
M/L for cleaning of PS storage tank of capacity 10000 to 15000 Gln upto 10 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed.: (Locations:- Rupa water Point - 01 , Gachham wate point - 01 Nos, 2 Dogara - 02 Nos , 405 FD Hospital -02 Nos )
M/L for cleaning of PS storage tank of capacity 20000 to 30000 Gln upto 10 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed.: ( Locations:- Rupa water Point - 02 , Gachham wate point - 04 Nos, 2 Dogara - 01 Nos , 1 st Mahar - 03 Nos )
M/L for cleaning of PS storage tank of capacity 40000 to 50000 Gln upto 10 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed.: (Locations:- Rupa water Point - 01 Nos )
Dismantling carefully the existing MS sheet of any size and thickness, MS structural steel of any section from the existing PS Tank of capacity 20000 to 30000 Gln including unbolting nuts bolts and washer where ever required from existing PS tanks (Locations, 405 FD Hospital - 02 Nos , Gachham water Point - 02 Nos , 1 st Mahar water point - 01 Nos)
Fixing only old serviceable PS plate of any size and any thickness for side or bottom plate of PS tank, fixing with new or old serviceable nuts, bolts and all new jointing materials such as lead wool gasket, black non toxic putty etc complete all as specified and directed. (All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only).
Supply and fix MS plate 6 mm thick as per existing size for bottom and side of the PS tank upto 10 mtr height from the ground pre fabricated, factory made including drilling holes, welding cutting etc fixing with new nuts, bolts and washers and all new jointing materials such as lead wool gasket black non toxic putty etc complete all as per specified and direted by Engr In Charge. (Rupa Water Point PS Tank - 65 Nos Plate @ 74 Kg/Each, size 1.25x1.25x6mm)
Fixing only old serviceable MS sheet joint as in cover of PS tank up to 10 Mtr Height including cutting, drilling hole etc fixing with new or old serviceable nuts, bolts and washers etc complete all as specified and directed, (All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only). Rupa water point -02 x 9 Nos , 405 FD Hospital -02 x 7 Nos , Gachham water Point - 01 x 8 Nos )
Supply and fix 3.15 mm thick MS sheet joint as in cover of PS tank as per existing size for roof of the PS Tank including cutting, drilling hole etc fixing with new or old serviceable nuts, bolts and washers etc complete all as specified and directed, (All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only). (Locations, 405 FD Hospital - 02 Nos , Gachham water Point - 02 Nos , 1 st Mahar water point - 01 Nos Total -05 Nos Sheet @ 70 Kg/Each, size 2.44 Mtr x1.22 Mtr x 3.15 mm )
Fixing only old serviceable structural steel including cutting, drilling hole etc fixing with new or old serviceable nuts, bolts and washers complete all as specified and directed. (Note :All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only). (Locations :- Rupa water point -02 Nos , 405 FD Hospital -02 Nos , Gachham water Point - 01 Nos)
Supply and fix MS angle, MS flat or MS tee section of grade Fe-410-W cut to required size and shape for bracing, supports and clamps including welding drilling holes, fixing with new or old serviceable nuts, bolts and washers complete all as specified and directed. (Note :All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only). (Locations :- Rupa water point -02 Nos , 405 FD Hospital -02 Nos, Gachham water Point - 01 Nos ) Total Rm 150 wt of 65x65x6mm @ 5.8 Kg per Rm
S&F 16 mm to 20 mm Hexagonal head and 30 to 75 mm long MS screw bolt (Machine made) with two number of washers one hexagonal nuts for required size of bolts (n.exc 5 cm long) incl two nos washers each bolts complete all as specified and directed.
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for rendering 10 mm thick cement plaster in cement mortar (1:4) on old face of brick work or concrete surface on walls complete all as specified and directed.
Material and labour for preperation of new or old steel surface exceeding 10cm width or girth, including cleaning, washing and applying coats of black bituminous paint anticorossive (suitable for drinking purpose) over a coat of red oxide primer on internal sufaces of PS tank complete all as specified and directed.
Material and labour for preperation of new or old steel surfaces externally exceeding 10cm width or girth, OG green synthetic enamel paint over a coat of red oxide primer on external sufaces of PS tank complete all as specified and directed.
Material and labour for writing letter or figures such as capacity of tank , Date of clening (Block, Roman, Italic or Indian) of size not exceeding 30 cm height with synthetic enamel paint all as specified and directed.
M&L for cleaning of sedimentation tank with Gravity feed filter bed of of size 15x12x3.5 m after draining out complete, clean the surface, bottom, wall, chamber etc by the help of brushes chemical/Acid and taking out all silt, dirt, etc complete all as per specified and direted by Engr In Charge.
S & F in replacement incl leakage testing of galvanised steel water tubing medium grade 150 mm dia bore with all fittings such as bends, flange,elbow, reducer etc,laying/connecting pipe to PS tank through connectors as required at site, laid under floor / trenches complete all as per specified and direted by Engr In Charge.
Description all as per item No 19 of above but of size 100 mm dia all as specified & directed
Description all as per item No 19 of above but of size 80 mm dia all as specified & directed
Description all as per item No 19 of above but of size 50 mm dia all as specified & directed
Taking out old unserviceable Gun metal gate valve in different sizes 20mm, 25mm, 40mm and 50 mm with iron wheel head complete all as specified and directed.
Supply, installation, commissioning and testing of 25 mm bore gun metal gate valve ISI marked class I with iron wheel head screwed both ends for iron pipe at directed at site complete all as specified and directed.
Supply, installation, commissioning and testing of 40 mm bore gun metal gate valve ISI marked class I with iron wheel head screwed both ends for iron pipe at directed at site complete all as specified and directed.
Supply, installation, commissioning and testing of 50 mm bore gun metal gate valve ISI marked class I with iron wheel head screwed both ends for iron pipe at directed at site complete all as specified and directed.
Taking out old unserviceable Cast iron Sluice valve in different sizes 150mm, 100mm and 80mm with iron wheel head complete all as specified and directed.
Supply and Fixing for cast iron sluice valve in repair, class PN 1.6 long body type, 150 mm bore with brass spindle, both ends flanged with holes, ISI Marked (IS-14846-2000) provision of carbon steel nuts, bolts & washers, rubber gasket etc, with CI wheel, fixed to CI/GI water mains complete all as per specified and direted by Engr In Charge.
Supply and Fixing for cast iron sluice valve in repair, class PN 1.6 long body type, 100 mm bore with brass spindle, both ends flanged with holes, ISI Marked (IS-14846-2000) provision of carbon steel nuts, bolts & washers, rubber gasket etc, with CI wheel, fixed to CI/GI water mains complete all as per specified and direted by Engr In Charge.
Supply and Fixing for cast iron sluice valve in repair, class PN 1.6 long body type, 80 mm bore with brass spindle, both ends flanged with holes, ISI Marked (IS-14846-2000) provision of carbon steel nuts, bolts & washers, rubber gasket etc, with CI wheel, fixed to CI/GI water mains complete all as per specified and direted by Engr In Charge.
M&L for structural MS frame work half round or other stock section including securing posts and stuts in fencing, frame work for pump house/gates of installations, base frame for equipments including securing bolts, posts and sturts in fencing including cutting and makeing shapes as desired, drilling holes, notching for wire cut to size and made to the exisitng shape suitable for fixing MS chequred duct covers / door panels, including nuts, bolts and washers, welding / bracing works, bending cold or hot drilling holes for bolts in any shapeetc flat iron fillets (for securing wire mesh etc) all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 including one coat of primer and two coats of synthetic enamel paint to the entire steel surfaces complete all as per specified and direted by Engr In Charge.
Dismentling carefully the existing valve pit, removing ruined material from site where directed complete all as specified and directed.
Material and labour for construction of Solid PCC Block masonary valve pit of size (900mm x 900mm x 1000mm) (internal dimensions) 200 mm thick precast cement concrete solid block masonary wall in cement mortar (1:4) over 100 MM thick PCC 1:4:8 type D2 (Using 40 mm graded crushed stone aggregate) as in foundation, 15 mm thick rendering an cement mortar (1:6) internally, externally upto 15 cm below ground level provision of valve pit cover made out of 3 mm thick MS sheet welded with ISA 40mm x 40mm x 5 mm thick angle iron frame all round including provision of hinges, lifting handles, and locking arrangement fixed on top of valve pit by means of hold fast 150 mm long, embedded in PCC 1:2:4 type B1 (Block size 230 mm x 200 mm x 100 mm) including applying two coats of synthetic enemel paint over a coat of red oxide zinc chrome primer and necessary earth work in hard/dense soil complete all as per specified and direted by Engr In Charge.
Material and labour for construction of Solid PCC Block masonary valve pit of size (1500mm x1500mm x 1000mm) (internal dimensions) 200 mm thick precast cement concrete solid block masonary wall in cement mortar (1:4) over 100 MM thick PCC 1:4:8 type D2 (Using 40 mm graded crushed stone aggregate) as in foundation, 15 mm thick rendering an cement mortar (1:6) internally, externally upto 15 cm below ground level provision of valve pit cover made out of 3 mm thick MS sheet welded with ISA 40mm x 40mm x 5 mm thick angle iron frame all round including provision of hinges, lifting handles, and locking arrangement fixed on top of valve pit by means of hold fast 150 mm long, embedded in PCC 1:2:4 type B1 (Block size 230 mm x 200 mm x 100 mm) including applying two coats of synthetic enemel paint over a coat of red oxide zinc chrome primer and necessary earth work in hard/dense soil complete all as specified and as directed.
Taking down carefully existing filter media (sand/gravel) from the filtration plany vaeesl type at Rupa, Gachham, water point and removing the same not exceeding 50 mtr and and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.
Supply and laying filtration plant gravel round shape of size 6.5 to 12.5 mm as per the sample all as specified and directed.
Supply and laying Barakar river sand in filtration plant of effective size of 0.5 mm to 1.0 mm as per the sample complete all as specifed and directed.
M&L for 100 mm thick PCC 1:2:4 type B-2 using 40 mm graded aggregate as in floor, finished the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 80 mm thickness, with minimum compressive strength of 40 N / Sqmm (M-40 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid over and including 20 mm thick (compacted thickness) sand screed bed complete
M & L for 75 mm thick plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, all complete all as directed by Engineer -in-charge.
M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, over 20 mm thick screed bed of CM 1:4 , jointed and pointed in neat cement slurry in floors complete all as per specified and direted by Engr In Charge.
Supply only chlorine test kit with coloured ample complete with all testing fitments and 100 ml OT solution in rexine finish wooden box all as per sample complete all as specified.
Supply only OT solution in 200 ml bottle complete all as specified.
Supply only Calcium Hypochlorite 65% to 70% chlorine content in packed with 45 Kg each drum (calcium based granular disinfectant for water treatment much more stable than chlorine gas and stronger than bleaching powder & sodium hypochlorite complete all as per specified and direted by Engr In Charge. Make : Aquafit or equivalent as approved by NMPT committee of E-in-C's Branch. Note :-1.The calcium hypochoride will be issued in sealed containers of capacity 30/45/50 KG, cost of same shall be included in quoted rate.
Supply only Alum crystal type for agitation and water treatment as approved by GE. Note :- Consumable in water supply installation having batch No with manuacturing date should not exceed more than 90 days. complete all as per specified and direted by Engr In Charge.
M/S SM ANSARI (BID ID -3475937)
M/S ASHOK CONSTRUCTION (BID ID -3476819)
M/S R N ENTERPRISES (BID ID -3476331)
M/S N D ENTERPRISES (BID ID -3476735)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.86 MB
Tender.pdf
Tender Documents • 6.42 MB
BOQ_826384.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .