Repair to misc wooden furniture at old cantt/OD Fort under GE (East) Allahabad.

Amount

(a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP furniture items carefully without disturbing the adjoining parts and provision of new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the including making good the disturbed portion to match with the existing applicable, all as per drgs and as directed. (b) Work shall be executed where the furniture exists in different User Units/Md accns of GE (East) Allahabad including BSO's Furniture Yard. (c) Timber shall be of 1st class teak wood seasoned

FD-55/284/283 or simillar for Table 3'X2' with / without Drawer Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete, and rest shell be all as per drg.

Legs as per drg

Top long rail as per drg

Top Short rail as per drg

Center Stiffener as directed

Short stiffener as per drg

Drawer made of 18 mm thick pre laminated MDF board Exterior grade of shade as approved by GE with 2 mm thick teakwood beading in front, sides/back shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood (Make: Green Gold from Greenply/ Platinum Prime from Archidply/ Bond 710 from Century ply) complete and rest shell be as per drg.

Fancy Knob CP as per sample held in yard.

Wooden corners

PVC shoe as per sample.

FD-273, 30 or similar type/MAP Drg for Table Dining 6/8 Persons Provision of Top for 06 pers table 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine, complete all as specified and as per drg.

All as above but size for 08 Pers.

Wooden corners .

Top long rail as per drg

Top short rail as per drg

Legs as per drg

Stiffener between long rails

PVC shoe as per sample.

FD-33,275, DB-3982 or similar type for Table writing Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post formed with 0.6 mm thick laminate in colour/shade as approved by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine, complete all as specified and as per drg.

Legs as per drg

Foot rest as per drg

Stiffener side as per drg

Cabinet box with partition with 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive on one side and Deco paint to be applied two coats on other side all as directed and as per drg. Back ply shall be 12 mm BWP grade as per drg.

Cabinet door made out of 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed and specified in drg., with and including provn of Lock (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) in Cabinet.

Back ply 12 mm BWP grade as per drg.

Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by GE with suitable adhesive as approved in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete, that runs on and including provn of Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) in Drawers all as directed and specified in drg. Deco paint shall applied in two coats on all surfaces except front of drawers.

PVC shoe as per sample.

Drg No. FD-32,251, DB-3180 for Table Dressing Ladies Frame assembly along with Mirrorr 5mm thick (Make-Modiguard/Atul/Saintgobain) & 6 mm thick Back ply BWP grade (Make: Century Ply/ Greenply/ Archidply) as per drg.

Cabinet box with partition with 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed and as per drg. Back ply shall be 12 mm BWP grade as per drg.

Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by GE with suitable adhesive as approved in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete, that runs on and including provn of Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) in Drawers all as directed and specified in drg. Deco paint shall applied in two coats on all surfaces except front of drawers.

Plain glass with roller and slider as per drg.

12 mm thick back ply BWP grade of table dressing box as per drg.

Base frame of teak wood as per drg.

Drg No. FD/MAP-II/07 for Stool Dressing with Cushion Cushion complete with 40 density , removable type (Make:Sleepwell, Product-Primo Cool/ Godrej) with upholstery of tapestry cloth of range not less than Rs. 450/metre (as per sample kept in BSO ) colour and shade & quality approved by GE.

Legs as per drg.

Top rail as per drg.

Top short rail as per drg

Drg No. FD-277/ 384, DB-3973 for Peg Table Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete and rest shall be all as per drg.

Legs as per drg.

Top rail/Bottom Rail rail as per drg.

20x40 mm top short rail

20x40 mm stiffener between bottom rail

PVC shoe as per sample.

Drg No. FD-276/248 for Table Bed Side 6 mm thick back ply BWP grade of table bed side as per drg.

Top/bottom/Shelf made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed and as per drg.

Sides made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed by and as per drg.

PVC shoe as per sample.

Drg No. FD-274 / 235 for Table Centre Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete and rest all as per drg.

Legs as per drg.

Top rail/stiffener as per drg.

Bottom rail as per drg.

20x50 mm top short rail

20x50 mm stiffener between bottom rail

Wooden corners

PVC shoe as per sample.

Drg No. FD-26/241 for Side Board Cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/ Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm (Make: Greenply/ Archidply/ Century ply) of shade approved by GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed and all as per drg. Back ply shall be 12 mm BWP grade as per drg.

Cabinet door made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm ( Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed and as per drg. SS Piano hinges shall be used for fixing. Lock (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) shell be provided in Cabinet complete all as directed and as per drg.

Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by GE with suitable adhesive as approved by GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Slider on with and including provision of Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) shall be provided in Drawers complete all as directed and as per drg. Deco paint shall be applied in two coats on all surfaces except front of drawers.

Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg.

Drg No. FD-278, 34, 382 for Teapoy Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete and rest all as per drg.

Legs as per drg.

Top rail/stiffener as per drg.

Bottom rail as per drg.

20x50 mm top short rail

20x50 mm stiffener between bottom rail t

Wooden corners

PVC shoe as per sample.

Drg No. FD-246/247 for Bed Ply top Teak face ply 3.5/4 mm thick on head rest/foot rest (Make- Greenply/Century Ply/Archid Ply), with half round teak wood beading complete as per drg

Long rail as per drg

Ply top 12 mm thick BWP Grade ( Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) rest complete all as per drg.

Head rest complete as per drg

Foot rest complete as per drg

Stiffner as per drg

Wooden corners

Drg No. FD-281/373/MAP drg for Sofa set 4/5 seater Legs/side rails as drg

Arms as per drg

Front rails/back rail for Three Seater as per drg

Front rails/back rail for One Seater as per drg

Bearer/Batten as drg

Back frame top/bottom for Three Seater as per drg

Back frame top/bottom/sides for One Seater as per drg

Cushion complete with 40 dennsity PU foam of size 560 X 530 X 110mm (Make:Sleepwell, Product-Primo Cool/ Godrej) with upholstery of tapestry cloth of range not less than Rs. 450/metre (Sample kept in BSO Office) colour and shade & quality and providing a chain of best quality (on either of 21" side) of make YKK with two runners at both ends as approved by GE.

Cushion cover of tapestry cloth of range not less than Rs. 450/mtr quality and providing a chain best quality (at either of 21" side) of make YKK with two runners at both ends as approved by GE.

Drg No. FD-279/16/250 for Chairs Dining Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

Re-canning of Chair Dining in Godrej pattern with 2 mm wide new white plastic cane and 3mm wide at the edge of make as approved by GE including taking out old canning complete all as specified and directed.

Drg No. FD-285 for Chairs Wooden Bottom Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

Ply wood BWP grade as per drg.

Drg No. FD/MAP-II/04 or similar for Chairs Dining Officers Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

Replacement of unserviceable plywood for seat with new one 12mm thick including provision of PU foam cushion, 40 Density (Make: Sleepwell (Primo Cool)/ Godrej) with Tapestry cloth as approved by GE of rate not less than Rs 450/Metre complete as per Drg and as directed.

Drg No. FD-20,202,250,280 for Chair Writing Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Arm rest as per drg

Back strip as per drg

Re-canning of Chair writing in Godrej pattern with 2 mm wide new white plastic cane and 3mm wide at the edge of make as approved by GE including taking out old canning complete all as specified and directed.

Drg No. FD-229/ 201/17 for Chair Easy Rear legs as per drg.

Front Leg as per drg.

Seating/back Frame members front, back,side rail as per drg.

Arm rest as per drg.

Re-canning seat of Chair easy in Godrej pattern with 2 mm wide new white plastic cane and 3mm wide at the edge of make as approved by GE including taking out old canning complete all as specified and directed.

Re-canning back of Chair easy in Godrej pattern with 2 mm wide new white plastic cane and 3mm wide at the edge of make as approved by GE including taking out old canning complete all as specified and directed.

Drg No. FD/E6/MAP/09 for Bin Linen Multipurpose Cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/ Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm (Make: Greenply/ Archidply/ Century ply) of shade approved by GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed and as per drg. Back ply shall be 12 mm BWP grade as per drg.

Cabinet door made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 1.00mm ( Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed and as per drg. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba)shall be provided in Cabinet complete all as directed and as per drg.

Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 1.00mm of approved shade with suitable adhesive as approved by GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete rests on and including provision of Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) shall be provided in Drawers all as directed and as per drg. Deco paint shall be applied in two coats on all surfaces except front of drawers.

Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg.

Fancy Knob CP as per sample held in yard.

Drg No. FD-277/ 384, DB-3973 for Stool Dresing CB Re-canning of Stool dressing CB in Godrej pattern with of 2 mm wide new white plastic cane and 3mm wide at the edges make as approved by GE including taking out old canning complete all as specified and directed.

Legs as per drg.

Top rail/Bottom Rail rail as per drg.

Top short rail as per drg.

PVC shoe as per sample.

PVC shoe as per sample kept in BSO Yard Note: This item shall be executed for other wooden furniture items which are not catered here-in-before.

A) M&L for melamine polishing with spray machine after removing of existing polish and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (East) Allahabad including BSO's Furniture Yard as directed by Engineer-in-Charge.

Almirah Medium/large All Types Drg No. DB-3951/4042/ 4047

Bed Plywood Top Drg No. FD-246/247

Chair Dining Drg No. FD-279/16/250

Chair WB Drg No. FD-285

Chair Dining Officers Drg No. FD/MAP-II/04/FD/MAP-II/10

Chair Writing Drg No. FFD-20,202,250,280

Chair easy Drg No. FD-229/ 201/17

Peg table Drg No. FD-384/277

Side board Drg No. FD-226/241

Sofa Set 5 seater Drg No. FD-281 /373

Table dining 6/8 pers Drg No. FD-30/239 /273

Table 900x600mm with & without Drawer/ Table 900x900 Drg No. FD-42/ 55/ 41/ 223/ 224/ 231/ 284/ 283/ 291/ 293

Table centre Drg No. FD-235/274

Table dressing ladies Drg No. FD-251

Table wrtiting Drg No. FD-275/DB-3982

Teapoy Drg No. FD-232/278/34

Stool dressing with cushion Drg No. FD-251

Mohit Enterprises

Bharat Trading Company

R K GUPTA AND SONS

M/s Rajeev Kumar

Supreme Builders

SUNIL TRADERS