WBPWD/EE/KNHED/109Q/2nd Call/21-22

Amount

SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. Make : OTIS / KONE/SCHINDLER Type: passenger Lift . Load : 10 Passenger / 680 Kg Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF) Machine:- Energy efficient machine, Geared/Gearless, with Machine Room Position of Machine Room: Directly above the lift shaft Speed: 1Mtrs./ Sec

Floor served: G+7 Landing: 08 (Eight), all on same side Total Rise 29.4 Mtr (Approx) [Bidder should Visit the Site] Operation: Microprocessor based simplex full collective with or without attendant. Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Buttons:all buttons on car & landing shall be luminous & encoded with braille Leveling accuracy:±5 mm(Micro levelling arrangement ) CAR Car inside :1300 mm ( W ) x 1350 mm ( D ) x 2200mm(H)

Car Entrance : Clear Opening 800 mm (W) x 2000 mm (H ) protected with car door Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan Car Ventilation: Pressure fan with anodised aluminium grill. Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order). Car Door: Stainless Steel centre opening (COPD) automatic door provided with V3F controlled door drive system.. Minimum 1 Hour fire retardant. Landing Door: Stainless steel side opening door operated synchronizing with car door

Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio & display indication Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room Emergency Alarm: Battery operated alarm bell system in lift car and control room

Fireman switch: Fireman switch at main landing terminal. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Main rope/Belt - As per manufacturer's standard conforming to IS

DIMENSION OF SHAFT & POWER SUPPLY Available Shaft Dimension : 2150mm (Wide) X 1900(Depth) mm Available Shaft Dimension : 2150mm (Wide) X 1900(Depth) mm Pit Depth : 1600 mm [Bidder should Visit the Site] Overhead : 4800 mm [Bidder should Visit the Site] Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS

SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. Make : OTIS / KONE/SCHINDLER Type: passenger Lift . Load : 13 Passenger / 884 Kg Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF) Machine:- Energy efficient machine, Gearless/Geared, with Machine Room Position of Machine Room: Directly above the lift shaft Speed: 1Mtrs./ Sec Floor served: G+7

Landing: 08(Four), all on same side Total Rise :29.4 Mtr (Approx) [Bidder should Visit the Site] Operation: Microprocessor based simplex full collective with or without attendant. Signals: Digital car position indicator, car travels direction indicator in car & at all landing with call registration indicator. Buttons:all buttons on car & landing shall be luminous & encoded with braille Leveling accuracy:±5 mm(Micro levelling arrangement )

CAR Car inside : 2000mm ( W ) x 1100 mm ( D ) x 2200mm(H) Car Entrance : Clear Opening 900 mm (W) x 2000 mm (H ) protected with car door Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan Car Ventilation: Pressure fan with anodised aluminium grill. Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel centre opening (COPD) automatic door provided with V3F controlled door drive system. Minimum 1 Hour fire retardant. Landing Door: Stainless steel centre opening door operated synchronizing with car door Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio & display indication Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room Emergency Alarm: Battery operated alarm bell system in lift car and control room

Fireman switch: Fireman switch at main landing terminal. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator Main rope/Belt - As per manufacturer's standard conforming to IS

DIMENSION OF SHAFT & POWER SUPPLY Available Shaft Dimension : 2600 mm (Wide) X 1900(Depth) mm Pit Depth : 1600 mm [Bidder should Visit the Site] Overhead : 4800 mm [Bidder should Visit the Site]

Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS N.B. Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish.

Special Terms and Conditions 1. It is stated that the above work place is existing COVID Hospital, In case of any mishap or accidental to any staff that deputed by the agency the whole responsibility is to be borne by the concern agency. 2. The Agency shall be responsible for provisioning of all COVID safety measures including regular sanitiziation of work places, vaccination of employees and compliance of stated directive and COVID appropriate norms. 3. All the issues related to the safety of the staffs should be taken care by the agency itself. (Defect Libilities period for 01 year from the date of completion of work) (Rate should be quotated including all taxes and duties) (Defect Libilities Period of 01(one) year from the date of completation of work.)

Otis Elevator Company(India)Limited