SPL REPAIR OF STEEL LADDER AND STAINLESS STEEL RAILING FOR OFFRS, JCO/OR MD ACCN AT RANJIT VIHAR UNDER AGE B/R-II AND PROVN OF 01 X INCINERATOR FOR WASTE PAPER BURNING AT 282 (I) FD WKSP COY EME AT BRICHGUNJ MIL STN, SRI VIJAYA PURAM

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm

M&L Plain Cement Concrete Type C1 1:3:6 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed

Dismantling of mild steel work of any description not otherwise specifically provided for complete all as specified and as directed .

S & F rolled mild steel structural steel work of angle, channel etc. confirming to Fe-410-W (grade E 250) quality 'A', fixed as in purlins, brackets etc,complete all as specified and as directed .

Demolition of cement concrete of any description and in any position incl floor tiles etc complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix Stainless Steel railing, (SS 316 grade) of safety railing consists of vertical and horizontal bars of thickness not less than 2.0mm, welded to base plate , MS plate, maintenance free, corrosion resistant, aesthetic looking stainless steel extruded sections complete all as specified and as directed by Engineer-in-charge.

M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc chrome primer incl preparation of new or previously untreated steel surfaces of any description over 10cm width or girth.

S&F Mild steel bolts exc 12mm n' exc 20mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long

Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of block masontry even and fair without using extra cement.(WPC shall be added in only 5mm thick top layer of plaster @ 3% by weight of cement content or as per manufacturers instructions.)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including prepartion and applying priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

Surface dressing n.exc 15cm deep in soft/loose soil etc complete all as directed.

Excavation over areas n. exc 1.5m deep and getting out in soft/loose soil etc complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc complete all as specified and as directed.

M&L for RCC M-30 Design Mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed

M&L for RCC M-30 design mix (using 20 mm graded stone aggretate) as in walls retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings incl attached pilasters and butteresses etc complete all as specified

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for curved rough finished surfaces of concrete

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for curved fair finished surfaces of concrete

M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping including necessary formwork and finishing of exposed surfacs of concrete etc complete all as directed.

S&F 50x50x8mm thick gauge bars mesh reinforcement of hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia etc complete all as specified and as directed.

M&L Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia.

M&L for hardcore of broken stone of gauge n exc 63mm deposited spread and levelled in layers n.exc 15 cm thick watered and well rammed to a true surface complete all as specified.

M&L for sand filling under floors or in foundations including watering and consolidation etc complete all as directed.

M&L for 75mm thick PCC 1:2:4 type B2 using 40mm graded aggregate as in flooring

M&L PCC 1:3:6 type C1 using 20mm graded aggregate of 75 mm thick as in Plinth Protection.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed.

S&F 1.25mm thick mild steel, plain, black sheet in cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S&F framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc confirming to Fe 410-W(Gde-E-250) quality-A all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated soil to a distance n.exc 50 m and depositing as directed

Please Enable Macros to View BoQ information