Construction of a Community Hall for people of village Hutt, District-Kathua, J and K (CSR-405)

Amount

Earth work in excavation by manual means in trenches for foundations,drains,pipes,cables etc.(Not exceeding 1.5 mtr in width) & for shafts,wells,cesspits, & the like not exceeding 10 sqm on plan,depth upto 1.5 mtr. including disposal of excavated earth upto 1 mtr from cutting edge,disposed earth is to be levelled & neatly dressed in:All Kinds of soils.

Providing and laying in position cement concrete of specifed grade excluding the cost of centering and shuttering -All work upto plinth level 1:4:8(1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) Crushed

Random rubble masonry with hard stones from nallah in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 coarse sand)

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).Crushed

Stone soling 30 cm thick.

Supplying and filling in plinth with fine sand under floors including watering, ramming ,consolidating and dressing complete.

Brick work with F.P.S. bricks of class designation 75 in Super structurre in:Cement mortar 1:6(1 cement : 6 fine sand)

Centering and shuttering including strutting, propping etc. and removal of form for; Foundations, footings, bases of columns etc for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for; Columns,Pillar, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting, propping etc. and removal of form for; Lintels, Beams, plinth beams, girders, bressumers and centilevers.

Centering and shuttering including strutting, propping etc. and removal of form for; Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for; Edges of slabs and breaks in floors and walls

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C.work including straightening,cutting, bending, placing in position and binding all complete. THERMO-MECHANICALLY TREATED BARS(Make Kamdhenu,Tata,SailGrade Fe-500)

Cement concrete flooring 1:2:4 (1cement :2 coarse sand : 4graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. - 40mm thick with 20mm nominal size stone aggregate Crushed

6mm Cement plaster to ceiling In Cement mortar 1:3(1 Cement:3 Fine Sand)

12mm Cement plaster of mix 1:6 ( 1 cement : 6 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix 1:6 (1Cement:6 Fine Sand).

Finishing walls with acryclic smooth exterior paint of required shade on New work(two or more coats applied @ 1.67 litre/10sqm over & including base coat of water proofing cement paint applied @ 2.20Kg/10sqm)Make Asian,Berger,Nerolac)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Applying priming coat :With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two of more coats)Make Asian,Berger,Shalimar,Nerolac)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fasteners shall be paid for separately) Second class deodar wood

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains of cross bands and face veneers on both faces of shutters 35mm thick including ISI marked ms pressed bright finished butt hinges with necessary screws of required size

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings/wooden frames with rawl plugs screws etc.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick ) floated glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. SECOND CLASS DEODAR WOOD 30mm thick

Renewing glass panes, with wooden fillets wherever necessary Glass panes weighing 10kg/sqm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : .250x16mm

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm (Standard Make)

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 150x10 mm (Standard Make)

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125mm (Standard Make)

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100mm (Standard Make)

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stoper

Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer, best make of approved quality embossed on the body, door weight upto 35kg and door width upto 700mm with necessary accessories and screws etc complete.(Make Godrej/Samrat)