SPL REPAIR TO BLDG NO P-07 AT ARUN KHETRAPAL MARG UNDER GE (EAST) DELHI CANTT-10

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed.

S&F flush door shutter 30mm thick solid core construction with Block board and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Factory made single extruded WPC solid door/window ceosetry winodws and other single or double frames chowkhat of size 65x125MM cpmprisingn of virgin PVC polymer of K value 58-60 suspension grade calcium carbonate and natural fibre wood powder/ rice husk/ wheat husk and non toxic additives (maximun toxicity index of 12 for 100gms fabricated with miter joints aftr applying PVC colvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl steenght of 2200 N FACE and 1100 N Edge minimum compressive strength of 58 N/mm2 modules of elasticity 900 n/mm2 and resisitance to spread of flames of class A category with property of being termite/borer proof water/ moisture proof and fire retardant

Providing and fixing factory made single extruded Moulded WPC (Wood Polymer Composite) solid pre laminated flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. and fixing with 3 stainless steel butt hinges in each shutter of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded moulded WPC (Wood Polymer Composite) solid prelaminate type fly proof wire mess door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with 3 No stainless steel butt hinges in each shutter of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: wire mess shall be paid separately)

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.00 Sqm to 2.50 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Note: The unit rate quoted by contractor include all other connected accessories., including 5mm glass and wire mesh Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door up to 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality inclduing 8mm toughened glass complete all as specified and directed by Engineer-in-Charge. Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.