8125/SAR-T-02/2025-26 ADDN/ ALTN TO BLDG NO T-8 AND PROVN OF UPS AND CONNECTED ITEMS AT MAFI PS-II AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Surface dressing not exc 15cm deep in soft/loose soil complete all as specified and directed by Engr-in-Charge. Note : Removing of vegetation / shrubs / brushwood / undergrowth and carrying away rubbish to a distance of 50 m deemed to included in quoted rate.

Excavating in trenches, not exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. Note :- Soil obtained from excavation under item 2.00 here-in-before shall be used for filling.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified & directed by Engr-in-Charge.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otheriwse specially provided for if cement concrete is reinforced (reinforcement cut as required to facilites demotion) complete all as specified & directed.

Dismantaling wrought iron or mild steel work of any descrpition not otherise provided for complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n. exc 1.5 Sqm including removing to store complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n. exc 4 Sqm each including refixing in other opening or removing to store complete all as specified and directed.

M & L for cutting opening through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings etc or cutting out defective brick work for under pinning, incl providing fixing and removing shorintg, cleaning and stacking bricks, removing surplus servicable bricks hard core etc to store and rubbish not exc 50 m complete all as specified and directed.

S&F steel rolling shutters, without ball bearings , thickness of laths 1.25 mm as specified incl top cover, anchoring rod, hapse and staple and one coat of primer erected in position as indicated push pull or manual type complete all as specified and directed.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above or below the starting point complete all as specified& directed by Engr-in-Charge.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for form work to sides of Pillars, posts, struts piers, columns etc in squarre, rectangular or polygonal, rough finished surfaces of concrete complete all as specified and directed.

M&L for Reinforced cement concrete Design mix (M-25 ) (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge. Note :- Reinforcement shall be measured and paid for separately.

M&L for Reinforced cement concrete Design mix (M-25 ) (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge. Note :- Reinforcement shall be measured and paid for separately.

M&L for Reinforced cement concrete Design mix (M-25) (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge. Note :- Reinforcement shall be measured and paid for separately.

M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brick work of walls including finishing the surface fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified & directed by Engr-in-Charge.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked) as per manufacturer’s instructions, finished even and smooth without using extra cement complete all as specified and directed. Note : - Supply only water proofing admixture shall be measured and paid for separately.

M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate), as in sub base complete all as specified and directed.

M&L Vetrified Ceramic tiles 10mm thick double charged (square/rectangular) polished, area of each tiles exceeding 0.36 sqm, but not 0.42 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick cement screeding in CM (1:6) complete all as specified and directed.

M&L Vetrified Ceramic tiles 10mm thick double charged (square/rectangular) polished, area of each tiles exceeding 0.36 sqm, but not 0.42 sqm, in vertical surfaces as skirting and dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM (1:6) complete all as specified and directed.

S&F anodized aluminium frame with power coating (minimum thickness 50 micron) and other sections for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified and directed.

S&F door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width aand weight between 36 to 60 Kg and fixed complete all as specified and directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified and directed.

S&F 10mm thick toughned glass as in hinged doors, partitions ,automatic doors and similar work including cutting to shape, drilling, holes required complete all as specified and directed.

S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling, holes required complete all as specified and directed.

S&F 25mm dia and 16 gauge thickness Stainless steel Chrome finish toughened glass door handles 305mm long complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F brass mortice lock, vertical type/horizontal type , size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even complete all as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L Steel work in tubular trusses including, plates , nut/bolts, fastners, special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

M & L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for false ceiling made out of E-board classic of size 600 x 600 x 4 mm thick, GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 5mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c and applying two coats of Oil Bound distemper to the ceiling board complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully copper / aluminium point wiring inclucluding sunken box of piano/modular type, light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, pendants, bell push bell buzzer lamp holder bracket etc. removing from site for taking credit and making good disturbed surface of wall, floor etc complete all as specified and directed.

M & L for replacement of concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes (normal and modular type as required) including earth dolly with plastic laminated sheet top cover (cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :- (a) One light / fan point controlled by one way switch

(b) All as per Item No 52.00 here-in-above but for 6A socket outlet modular type on the same board complete all as specified and directed.

(c) All as per Item No 52.00 here-in-above but for 6A socket outlet modular type on independent board for 15Amps socket outlet combined to modular type complete all as specified and directed.

All as per Item No 52.00 here-in-above but using 2.5 Sqmm single core multi standard copper conductor PVC insulated sand unsheathed FRLS cable for 15A socket outlet on independent board including 4.0 sqmm multi standard copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed.

S&F in replacement socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed.

S&F in replacement socket outlet 6A 2/3 pin combined to modular type complete all as specified and directed.

S&F in replacement switch 6 amps modular type one one way complete all as specified and directed.

S&F in replacement switch 6/16 amps modular type one one way complete all as specified and directed.

S & F environment friendly recess/ pendent mounting 35 W LED flat panle 2' x 2' fabricated CRCA sheet steel duly powder coated housing cool white with high efficient LEDs and glare free opal diffuser PF> .95, lumen effcacy > 100Im/W, THD< 10% opearting range 220 V to 240 V, CRI> 80, colour temperature 6500/3500 K (as required) including connections with existing wire complete with all accessories complete all as specified and directed

S&F single pole & neutral incloser with a too pine and earth plug and socket complete with one single pole MCB 20A, 240V complete all as specified and directed.

S&F witing for circuit/submain wiring along with earth wire with 2 x 4.0 sqmm + 1 x 4.00 sqmm earth wire sizes of FRLS PVC insulated copper conductor unsheated in PVC conduit, single core cable in surface / recessed as required complete all as specified and directed.

Supply, laying and testing of XLPE cable insulated screened, PVC bedded, galvanised steel strip or wire armoured electic power cable (heavy duty) 1100 Volts grade with standard aluminum conductor of size 70 Sqmm 3.5 core complete all as specified and directed.

S&F double door distribution board 8 way TPN when MCB to be used as incommer powder coated with bus bar 200 Amps, 415V, earth stud, din rail complete all as specifed and directed. Note:- (a) MCBs are to be meausred and paid seperatly. (b) Make of MCBs and DBs should be same.

Supply and fixing in repair of Earthing to DBs with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 4.0 mm galvanised iron wire by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule Part-I 2009, GI earth lead shall be protected by GI pipe 15 mm dia medium grade and connected to distribution board including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and as directed.

S&F MCB TPN, 415V, 125 Amps breaking capacity of 16 KA complete all as specified and directed.

S&F MCB SP 5 to 32 Amps, 240V curve 'B' breaking capacity of 10 KA complete all as specified and directed.

S& F SMF VRLA battery 12 V, 150 AH with suitable copper wire single core of size 10 Sqmm with copper lugs connector complete all as specified and directed by Engr-in-Charge.

S& F online UPS of capacity 10 KVA, 1 Phase input and 1 phase output complete all as specified and directed by Engr-in-Charge.

S&F wall mounted air circulated 600 mm sweep including copper wound motor, metalic metalic body, 50 Hz, 240 V, 1440 RPM including all fixing/welding accessories complete all as specified and directed.

S&F exhaust fan, steel body AC single phase 230V of size 450 mm sweep double bearing with 1400 RPM blades and frame and louver complete all as specified and directed by Engr-in-Charge.

M&L frame work as in battery stand of angle FE-410 gde E-250 complete drilled or welded complete all as specified and directed.

M/S GURENDER SINGH (BID ID -3308685)

RAJAN TRADERS (BID ID -3308968)

NAQLI LAL SHARMA AND ARUN SHARMA (BID ID -3309061)

RADHA ENTERPRISES (BID ID -3306735)

SUBHASH CHAND CONTRACTOR (BID ID -3308931)

PANWAR CONSTRUCTIONS (BID ID -3309464)