Repair and Maintenance of EI and Cables in OA Sagar and Vidisha .

Amount

Supplying of following capacity/Rating and Poles, Change Over Switch, with sheet Steel enclouser and Side operating handle,suitable for operation on 415V, 50Hz, Three Phase, AC supply, Installation on wall or existing frame , testing commissioning etc. as required at site .

4 Pole 100 amp Rating

4 Pole 32 Amp Rating

Extention/ making Interconnection of MPEB power supply and DG supply from existing MCCB's in LT panel to New External Change Over Switch and from COS to LT panel bus bar including Supplying and Drawing of 4 no 16 sqmm multistrand PVC insulated Copper Conductor round Flexible cable (FRLS) in PVC Flexible pipe of suitable size on surface , providing copper lugs at all ends etc as required at site .

Supplying of the following sizes XLPE insulated PVC inner sheathed Copper/Aluminium conductor Armoured /un-Armoured cable of 650/1100V grade conforming to IS: 7098(Part 1) 1988 with upto date amendments etc. as required.

4 x16 Sq.mm. Aluminium Conductor Armoured Cable.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface/in the air as required.

Upto 35 sq. mm.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply, Installation, Testing and Commissioning of following prewired LED fitting complete with all accessories and driver and lamps, suitable for operation on 230 Volts, 50 Hz Single Phase AC Supply ,Directly on wall/ceiling including connection with 1.5 sqmm FRLS PVC insulated ,copper conductor ,single core cable and earthing etc. as required.

b) 4 feet, 20 Watts (+/- 2 Watts) energy efficient linear box LED batten light having 6500K colour temp. and minimum 1900 Lumens.(M/s Philips ,Syska, Surya or Similar Superior make)

Supplying and fixing of following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch.

15/16 amp switch.

3 pin 5/6 amp socket outlet.

6 pin 15/16 amp socket outlet.

Supplying and fixing of following sizes of medium class PVC Casing Capping along with accessories in surface as required.

25 mm x 12 mm.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ PVC casing caping as required.

1 x 1.5 sq. mm.

2 x 1.5 sq. mm.

4 x 1.5 sq. mm.

3 x 4 sq. mm.

SH: II ITC of Split AC Units

Installation, Testing and commissioning of wall mounted Split AC unit upto 2.0 TR capacity complete with indoor and outdoor units , installation of outdoor Condenser unit on existing M.S. stand, indoor unit on existing wall, providing nut bolts, making adequate hole in the wall for entry of copper pipes/tray, closing of holes, air gaps etc. after installation making testing commissioning etc. complete as reqd i/c fixing of existing Copper refrigerant piping brazing, leakage test , testing complete etc. as reqd.

Providing and Wrapping of expanded polyethylene foam tube (heat lon) insulation on the existing refrigerant piping complete with clamping etc. as reqd.

For 1/2” Copper refrigeration pipe

For 1/4” Copper refrigeration pipe .

Supply & Fixing following size copper refrigerant pipes if required at site I/c cutting, bending, brazing etc. complete as reqd during installation.

1/2” Copper refrigeration pipe

1/4” Copper refrigeration pipe .

Supplying & Fixing PVC braded drain pipe of suitable size for condense water complete as required.

Supplying fixing/ Laying 3 x 2.5 Sq. mm Round, Flexible, Multistrand Unarmoured, Copper Conductor Cable along with Copper piping on surface of wall including supplying fixing saddling, clamping, copper lugs, crimping etc. complete as required.

Supplying of factory fabricated, powder coated M.S. stand set complete with suitable for mounting of Condenser/Outdoor Unit of 1.5 /2 TR split Air Conditioning unit including Fixing on wall with anchor fastener etc. complete as required.(1 set comprises of 2 no's brackets).

Supplying and fixing DP sheet steel enclouser on surface /recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole

Supplying and fixing 100 Amp rating, Four Pole 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

AGRAWAL ENGINEER AND CONTRACTORS