SPL REPAIR TO BUILDING NO T-134 DINING HALL, T-135 OR COOK HOUSE, T-148 OR LIVING, T-5, T-10 AND BATHROOM, TOILET AND SEWAGE LINE ETC IN AOR OF AGE B/R-III AT VARIOUS LOCATIONS UNDER GE 874 EWS

Amount

Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering, all as specified.

S & F for pre- painted galvaniume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

S & F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge/hip covering/cladding to wall, fixed with self tapping screws, all as specified.

Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm(w/o taking off shutters from chowkhat), all as specified.

Taking down chowkat with shutters n. exc.1.5Sqm (w/o taking off shutters from chowkhat), all as specified.

S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid rounded or chamferred put together with glue pinned at joints all as specified.

S & F plain, framed, panelled shutters second class soft wood 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial faceveneers: supplied and fitted to chowkats, all as specified.

S & F plain, framed, panelled shutters second class soft wood 30 mm thick (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial faceveneers: supplied and fitted to chowkats, all as specified.

Dismantling timber scantling 40 Sq cm and over in section in any position in unframed work, all as specified .

M & L second class soft wood in scantling clean swan complete all as specified

Dismantling of boarding of any description fitted in any position with nails, all as specified.

S & F 2nd class softwood weather boarding clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps, all as specified.

-Ditto- all as per item No 12 but except boarding

S & F 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed by Engr-in-Charge

M&L for Preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

Dismantling wall and ceiling board (fiber,pulp,insulation,etc.) or insulation board /slab/blankets, any thickness,including cover fillets, all as specified.

M&L for 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of surface, complete all as specified and directed. Note : Frame work shall be measured and paid separately.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work as in ceiling, all as specified.

M & L for plain fillets of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails.

M & L for MS barrel tower bolt, stove enamelled black, with bright bolt of 100mm long, all as specified.

-Ditto- all as per item No 20 above but 150mm long.

M & L for MS Sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum 6 No bolt and nuts of 250mm long, all as specified.

M & L for MS butt hinges med. Weight, cold rolled 100mm long, all as specified.

Ditto all as per item No 23 but 75mm long.

M & L for mild steel pressed handles, oval type, stove enamelled black of 100mm long, all as specified.

-Ditto- all as per item No 25 above but 125mm long.

Demolition of cement conc (Un - reinforced ) in ground floors and pavings n exc. 15cm thick.(Below or above ground level),all as specified.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedding and pointed in any mortar all as specified.

M & L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge.

M & L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slabe including rubbing and polishing complete cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) on and including 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes, all as specified.

-Ditto- all as per item No 31 but as in riser of steps, skirting, dado and pillar laid over backing coat of 10mm thick in CM 1:3, all as specified.

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified & directed.

M&L for multi coloured chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors,cement pigment of white & grey cement & in pigments, over and including 15mm thick screed bed in Cement Mortar 1:6 all as specified.

M & L for plinth protection 75 mm thick in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bituman 85/25 grade and three parts of sand by weight all as directed at site.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, all as specified.

M & L for brick work with subclass ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, any discription, including raking out joints, hacking for key, scrubbing down with water, etc., all as specified.

M & L for 15mm thick rendering plaster in cement mortar 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for two coats of cement base paint over a coat of on new plastered surfaces complete all as specified and directed.

S&F in repair Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on and including PVC frame made of 5mm thick and 35mm wide PVC sheet fillets fixed to wall as per specifications and drawing

M & L for Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on and inculding 15mm thick screed bed in Cement Mortar 1:6 all as specified

M&L sand filling under floors or in foundations including watering and consolidation, all as specified.

S & F glazed ceramic tiles in colour tiles vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting /dados over and including 15 mm rendering back coat in CM 1:4 all as specified & directed.

S&F stop valves cast copper alloy,fancy type ,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe,in repair, all as specified.

S&F bib taps cast copper alloy ,chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, in repair, all as specified.

S&F in repair 1000 Ltr capacity rotational moulded polyethylone water storage tank (cylinderical vertical with closed top ) noisted fixed in position all as specified in SSR Part -I, including dismantling of old tank, all as specified .

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors ceiling /wall etc. complete all as specified and as directed.

M&L Non-skid ceramic coloured tiles 7-8 mm thick,area exc 0.18 sqm but nexc 0.36 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and incudling 15mm thick screed bed in CM 1:6 over and including 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg), all as specified.

M&L chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over and including 15 mm thick screed bed of 1:6 cement mortar, all as specified.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in wall lining, all as specified.

-Ditto- all as per item No 53 above but except plywood

M&L for preparation of old painted surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

S&F 25mm thick 2nd class softwood boarding in floor, planed one side, with butt joints and fixed with nails, all as specified.

S & F glazed & skeleten shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats, all as specified.

S & F glazed & skeleten shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats, all as specified.

S & F in stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beads, all as specified.

S&F 4 mm sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5Sqm in each pane, all as specified.

S&F 100 mm long butt hinges extruded aluminium alloy alongiwith galvanised MS hinge type B-21 all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section, all as specified.

S&F 100 mm long aluminium anodised barrel tower bolt of exturded section, all as specified.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle, all as specified.

S&F 100 mm long aluminium handles cast type anodised, all as specified.

S&F 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete, all as specified.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, all as specified.

S & Fixed in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles, all as specified.

M&L for random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted built in CM 1:4 complete all as specified and directed

-Ditto- all as per item No 71 but except stone

M&L for PCC 1:2:4 type B-0 (12.50mm graded stone aggregate) as in coping,plinth band ,bed block including rounded or chamfered angle as directed including necessary formwork etc, all as specified.

M&L of rendering plaster 15mm thick on stone masonry surfaces or other than fair faces in cement motar 1:4 finished even and smooth (without using extra cement), all as specified.

M&L for preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed.

M&L hard core of guage n exc 63 mm of broken stone or boulders, deposited, spread in layer n. exc 15cm thick watered and rammed to a true surface, all as specified.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, all as specified.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing Note :- Door frame shall be water proof, termite proof, elegant and shall have excellent screws holding strength to fix hinges and hold doors properly for a long life)

M&L Non skid ceramic coloured tiles 7-8 mm thick,area exc 0.06sqm but nexc 0.11 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in CM 1:4 over and including 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg), all as specified.

M&L Glazed ceramic coloured tiles (300x200x7mm) thick, as in vertical surface such as in skriting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick rendering plaster in CM 1:4 all as specified.

M & L rendering plaster 15mm thick on other than fair faces of brick work or concrete surfaces in cement motar 1:6 finished even and smooth (without using extra cement), all as specified.

M&L rendering plaster 15mm thick on fair faces of brick work or concrete surfaces in cement motar 1:4 finished even and smooth (without using extra cement), all as specifid.

M&L for two coats of colour wash over one coat of white wash on newly plastered surfaces on wall including preparation of surface of wall, all as specified.

M&L for 10 ltrs capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets & PVC flush pipe 32mm bore ,in repairs, all as specified.

S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand, in repairs, all as specified .

S&F 15 mm Pillar taps ,cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank and flynuts screwed for iron pipes and fixed in repairs, all as specified.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.), all as specified.

M&L 15mm tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors, all as specified.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.), all as specified.

S&F Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe,in repair all as specified.

S&F Bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, in repair, all as specified.

S&F ball valves, high pressure,with polythene float and flynut complete,20mm bore ,in repair, all as specified.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends in repair, all as specified.

S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 alongwith chiken mesh wire netting 25 guage , 20 mm mesh fixed in repairs, all as specified.

-Ditto- all as per item No 95 but 20mm bore pipe

S&F 110mm PVC(SWR) P trap fixed in repairs, all as specified.

Dismantling 100mm dia PVC pipes in any position, all as specified.

M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as specified.

S&F 110mm PVC(SWR) bends, all as specified.

M&L for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as specified

S&F 75mm PVC(SWR) bends, all as specified.

S&F PVC (SWR) floor trap dia of outlet 75mm with grating incl jointing with solvent cement.fixed in repairs, all as specified.

M & L for plain cement concrete type 1:3:6 type C-2 (using 40mm grade stone aggregate), 150 mm thick as in floor all as specified.

S&F vitreous china squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe complete incluidng provision of lime concrete bedding fixed in repair, all as specified.

S & F for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. incl of fixing supply pipe to flushing cistern, trap and waste pipe

S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), all as specified.

S & F in repair liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms), all as specified.

S & F in repair towel Rail 450mm long of PTMT fixed with and including Chromium plated brass sand screws and wooden/plastic cleats (Minimum weight 170gms), all as specified.

S & F in repair toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws , all as specified.

S & F in repair PVC connections 15mm size with PTMT nuts of length 900 mm, all as specified.

S& F in repair for vitreous china premiums /EWC one piece /pattern including all necessary accessories all as specified

S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long tube, all as specified

S&F in repairs two way angular stop cock chromium plated 15mm dia complete all as specified and as directed by Engr-in-Charge.

S&F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified.

S&F PVC connection 15 mm length 450 mm fixed, in repairs, all as specified.

M&L PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement, in repair

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and makin good the disturbed surfaces complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v, 50HZ, RPM 1200, copper winding of sweep 300mm, all as specified.

S&F in renewal sub main wiring with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire single core of size 2 runs of 2.5 Sqmm and 1 run of 2.5 Sqmm (Nominal area) ISI marked drawn through in heavy duty ISI marked PVC casing capping or surface PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed on surface of wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed. Note: 3 runs of cable of 2.5 sqmm and one run of conduit/ casing capping shall be measured and paid as one unit.

S&F in renewal sub main wiring with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire single core of size 2 runs of 4 Sqmm and 1 run of 4 Sqmm (Nominal area) (ISI Marked) ISI marked drawn through in heavy duty ISI marked ISI marked surface PVC casing capping or PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed on surface of wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed. Note: 3 runs of cable of 4 sqmm and one run of conduit/ casing capping shall be measured and paid as one unit.

Supply and fix LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with dirver three core flexible coper conductor cases of suitable size complete, all as specified.

S&F in renewal of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sw.mm 2 core complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including surface cable 1100 volts grade including casing and capping/ including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from 1.6 mm thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc.covered with 3mm thick plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

-Ditto- all as per item No 127 herein before but wiring with 1.5 sqmm copper wire ( FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

-Ditto- all as per item No 127 herein before but wiring with 1.5 sqmm copper wire ( FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

-Ditto- all as per item No 127 herein before but wiring with 2.5 sqmm copper wire ( FRLSH) and 2.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5A ,flush type, all as specified

S & F switch socket combination 2 in 1,5A, flush type , all as specified.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type , all as specified.

S&F LED, 20 Watts, 4 ft, fittings complete with all accesories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body, all as specified.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body, all as specified.

M & L lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings , all as specified.

Supply and fix LED Bulb 9 Watt all as specified and directed by Engr-in-Charge.

S&F 09W/10W Bulk head liminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, all as specified.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground, (Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to and including galvanised iron earth wire 4 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 3 of MES SSR part-I (2009) including taking up/down old u/s earthing all as specified and directed . Note:- Unit rate is inclusive of following:- (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed. (d) 20 mm nominal bore medium grade GI protection pipe 7 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

-Ditto- all as per item No 141 but 4 way

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, all as specified and as directed by Engr -in-Charge.

S & F of MCB SPN, 240volt, 32 to 63 Amp capacity, 10 KA, 'C' curve .all as specified and as directed by Engr -in-Charge.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size16 Sqmm 2 core including service bracket complete all as spd and as directed.

patriotic builders (BID ID -3404656)

M/S SK ATLANTIC ENTERPRISES (BID ID -3412322)

M/S ALBURAQ INFRATECH PRIVATE LIMITED (BID ID -3415263)