Face lifting Landscaping Beautification of surrounding of Govt LD Hospital Srinagar

Engagement of labours for Clearance of site incl.removal of humps, rubbish and its disposal as directed by Engineer-in-charge at site complete.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish all complete as per the directions of Engineer-in-charge.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)

P/L stone soling (Hand packed) in trenches incl. ramming, dressing, watering etc. incl. all leads, lifts and carriage upto site of work complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) using crushed aggregate.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Ordinary cement without any pigment.

Supply and filling of good Earth by lorry laying in 15/22 cm layers incl. dressing watering and consolidating with hand rammers incl. cost & carriage of all materials, leads, lifts and carriages from approved source upto site of work complete.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats

French spirit polishing, one or more coats on old work

Lime surkhi Pointing on brickwork with lime surkhi mortar 1:3 (1 lime putty :3 Surkhi) including raking of joints in brick masonry minimum 10mm deep complete ornamental type with straight & vertical upright horizontal and vertical ruled lines and polishing of brick surface with sand stone to give a fair & finished look incl. scaffolding all complete

Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.

Structural steel welded work in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required in grating frames, guard bars, railing, brackets as per approved design incld. all carriage all complete.

Engagement of welder for the repair of already existing grills as per the directions of EIC at site complete.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm

Providing and fixing plained eaves boarding.300x40 mm (nominal size)2nd class kailwood.

P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and put-up in position in budloo wood (Frame work). of required size at required intervals including cost of necessary adhesive & cost of nails /screws incld. scaffolding to be approved by Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Preparing wooden based surface by kniffing grey paste filler of approved brand and manufacture

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.(of any size)

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 75x47x1.80 mm

Carriage of material by mechanical Transport including loading, unloading etc. complete.

Sand for an average lead of 15 Kms from approved source.

Stone aggregate for an average lead of 15 Kms from approved source.