Repair and Maintenance of RO Plant in Ward No 03

Supply and Fixing of FRP 30*72 Media 800IDV

Supply and Fixing of FRP 30*72 cARBON 800IDV

Supply and Fixing of Vessel Multiport Valve make UKL

Supply and Fixing of Flowmeter fluid

Supply and Fixing of High Presure and Raw Water Pump make LUBI

Supply and Fixing of Membrane 8040 make FILTEK

Supply and Installation of RO Digital Panel make ASTER

Supply and Fixing of Dosing pump and Chemical make ETHOS

Supply and Fixing of Outlet Fitting make ASTREL

Supply and Fixing of Spun Cartridge Filter. make WSES

Supply and Fixing of FRP Vessel Distribution System make WSES

Supply and Fixing of Pressure Gauge make GURU

Supply and Fixing of Big Blue Filter make WSES

Supply and Fixing of UPVC Fitting and Valve make ASTREL

Supply and Fixing of SS Piping and Plant control valve

Maintainance cost of 5000 LPH RO Plant/c skilled opertor,monthly engineer visit charge, chemical cost(10L/month x 150), Spun Filter (4/month x 400) and other parts i/c membrane, motor pump and electric items

Supply and Installation of Water ATM Machine with QR Code and Card

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [Through Rate]

[11.71.1]Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work [Through Rate]

[11.82.1]Painting the wooden / metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work [Through Rate]

[13.28]Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [Through Rate]

[17.6]Construction of Embankment with Material obtained from Borrow pits NA Construction of Embankment CBR 8% (for new road/ raising/ berms/ etc.) with approved material obtained from borrow pits, including compensation of earth with all lead and lift transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2, as per technical clause 305 of MORT&H specifications. [Through Rate]

[6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.1.7]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 7. 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) [Through Rate]

[7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]

[9.22.2]Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 2. 0.80 mm thick with zinc coating not less than 275 gm/m² [Through Rate]