CA NO CWE BTD 23 of 2020-21 Special repairs to Bldg No T- 1021, T- 1023, T- 1028 , and T- 1030 of OR Living Accn of AD Regmt at Bathinda Mil Stn under GE (South) Bathinda

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each and removing from site including cutting holes for removal of hold fast complete.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and removing from site including cutting holes for removal of hold fast complete.

S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, complete, all as specified of frame size 125 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

M & L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate in filling in chowkats / door frame or bed block of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

S & F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003 (Part I).

S & F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete.

S & F butt hinges, medium weight, cold rolled mild steel , size of hinges 100mm.

S & F mild steel barrel tower bolts, stove enameled black, with bright bolt, length of bolt 200mm.

S & F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm.

S & F 150 mm mild steel pressed handles, oval type, stove enameled black.

S & F 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete.

S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with galvanized steel wire staples complete.

S & F MS framed work such as grills, gratings, guard bars etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165.

S & F MS framed brackets of angles or tees with web and flange cut to shape , drilled and countersunk for screw including bending and welding angles as necessary etc not exc 10 Kg each brackets as in door frame sink , WHB , cooler stand etc and similar work complete conforming to Fe 290 Gde E-165.

Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 or Cement concrete 1 : 2 : 4 , type B1 as required , depth exc half brick but not exc one brick complete all as directed.

S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat painting complete all as directed.

S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat painting complete all as directed.

S & F sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/spring clips wherever necessary.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as approved, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of any type / size of sheet in roof coverings complete all as specified of Make : M/s TATA blue scope , M/s CRIL , M/s JSW Steel Ltd

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour as approved, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of any type / size of sheet in roof coverings complete all as specified of Make : M/s TATA blue scope , M/s CRIL, M/s JSW Steel Ltd

M & L for painting to new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

M & L for 40 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified.

M & L for machine cut kota stone slab flooring minimum size 450 mm x 450 mm, 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over and including 15 mm thick Screed bed or bedding layer in CM (1:6) including roughening of old concrete surfaces and applying cement slurry @ 3.00 kg per sqm complete all as specified.

M & L for machine cut kota stone slab 18 to 20 mm thick as in riser of steps , skirting , dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over and including 10 mm thick Screed bed or bedding layer in CM (1:6) including taking down old plaster on brick work complete all as specified.

M & L for Glass dividing strip , 3mm thick and 38mm wide laid in position complete complete all as specified and as directed. Note: Glass dividing strip shall be round smooth with stone and shall be laid.

S & F aluminium anodised snap grid frame work 605mm x 605mm for false ceiling comprising of main / cross tee / wall angle weighing not less than 0.36 Kg/RM to be fixed to ceiling with 6mm dia GI wire supporting hanger upto 1200mm length adjusting level fixed to roof slab at 600 mm c/c by means of 'J' bolt with necessary bolt , nuts and washers or expansion hold fasteners 12.5mm dia and 40 mm long as per manufaturer's instruction including M & L for 12 mm tapered edge gypsum board of size 600 x 600mm (conforming to IS-2095-1982) shall be screw fixed to ceiling section with 25 mm dry wall screws at 230 mm centre to centre , screw fixing shall be done mechanically either with screw driver or drilling machine with suitable attachment and finally the boards shall be jointed and finished so as to have a flush look including dismantling of old false ceiling of any type / any size complete all as specified.

Demolition of PCC (unreinforced) in ground floor and paving not exceeding 15cm thick (below or above ground floor) and removing the debris upto a distance exceeding 1 km but not exceeding 2 km etc complete all as specified.

M & L for rendering 15 mm thick in cement mortar (1:6) on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified.

M & L for rendering 15 mm thick in cement mortar (1:4) on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement mixed with liquid water proofing material as per manufacturer's instruction complete all as specified and directed. (Note :- Liquid WP material shall be measured and paid for separately.)

M & L for Brick work using old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), including demolition of old brickwork or stone masonry of any type.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof kerb rounded or chamfered on edge etc. etc complete.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

Complete removal of existing treatment of wall (any number of layers) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces and M & L for preparation of old plastered surfaces of walls and applying the following:- (i) Two coats of cement base paint of approved tint over and including a coat of alkali resistant external primer.

M & L for preparation of newly plastered surfaces of external walls and apply Two coat Cement base paint over a coat of alkali resistant primer all as specified.

M & L for preparing newly plastered surfaces of wall and applying Two coats of 100% acrylic emulsion paint over a coat of acylic internal primer complete all as specified.

Complete removal of existing treatment of wall (any number of layers) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces and applying Two coats of 100% acrylic emulsion paint over a coat of acylic internal primer on old prepared surfaces all as directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Taking down old cement plaster including raking out joints hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc complete all as specified.

Supply only liquid water proofing material, ISI marked.

Internal Electrification

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc except concealed conduit and sunken boxes and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed.

M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including rigid PVC concealed conduit not less than 20mm dia ( medium duty ISI marked) and conduit fittings with junction box , MS sunken box of 1.6 mm thick and including 3 mm thick bakelite laminated sheet top cover for one fan / exhaust fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated & unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including cutting chases and making good disturbed surfaces complete all as specified and directed.

All as per item No 43 here in before but for socket outlet 5 pin, 6 Amp on independent board but not below the switch board complete all as specified.

All as per item No 43 here in before but for socket outlet 5 pin, 6 Amp on same board complete all as specified.

All as per item No 43 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc.

S & F Switch semi modular with frame cover, flush type, single pole, one way, 5/6 Amp .

S & F Switch socket semi modular with frame cover, flush type, single pole, one way, 15/16 Amp .

S & F Semi modular socket, multipurpose, 2 in 1, 5 Pin, 6 Amp, flush type, including decorative frame cover. (Note : Switch and socket shall be of same make.)

S & F, fan regulator electronic step type (1-5), flush socket type 230-240 Volt, AC supply, complete all as specified and directed.

S & F ceiling rose, 3 plate, surface bakelite type, Polycorbonate body, 6 Amps, 250 Volts AC, 65 x 50 mm, two to three terminal (ISI marked) complete all as specified.

S & F in replacement , jumbo batten holder of PVC/Polycarbonate type with jumbo skirt suitable for batten fitting including of 9/10 watt LED bulb 6000K complete all as specified.

S & F sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounting, acrylic door, IP-43 protection, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc including taking down old unserviceable DB.

S & F MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection including taking down old unserviceable MCB SP complete all as specified.

S & F MCB, DP 40 to 63 Amps, 'C' curve , 415 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection and including taking down old unserviceable MCB TPN complete all as specified.

M & L for sub main wiring with 2 single core cable PVC insulated unsheathed of copper multi strandard conductor FRLSH cable of size 6 sqmm, 1100 votls grade drawing through in and including PVC concealed conduit 20 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FRLSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface etc including taking down old unserviceable wiring 6 Sqmm complete all as specified. Note:- Two runs of cable, one run of earth wire and one run of PVC conduit shall be measured as one unit.

S & F 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS 16106/IS 16107, minimum 6000K batten decorative type 4 feet long polycarbonate body, white, in built LED driver, power factor > 0.95 , Make all as per Crompton Cat Part No. DMLN1LT8-16 (for batten) and Cat part No. LT8-20-865-2 (for tube light) including 18/20 watt tube rod or equivalent model of any make given in Appx 'B' connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size including taking down old existing light fitting all as directed.

S & F energy saving LED street light fitting of 45 Watt with PDC aluminium housing with individual LEDs with modular secondary optics and IP-66 degree of protection , better optics for uniform distribution street/roadway luminaire with high 45 watt LED Lamp complete fitting with driver , LED strip and all other accessories etc , PF > 0.95 with voltage range 140 to 270 Volt, suitable for direct mounting on pipe bracket , fixing on pole/along the wall complete with and including GI bracket made out of 40 mm dia light grade GI Pipe - 01 No, MS clamp - 02 Nos, bent to shape including two coat of aluminium paint over a coat of primer and making electrical connection with providing of 1.50 metre long twin core round copper conductor cable of suitable size and testing complete all as per SYSKA Cat part No SSK-SLF-CF-45W-WL or equivalent model of any make given in Appx 'B', Cat Part No. as approved by GE complete all as specified including taking down old unserviceable existing street light fitting of any type and capacity from pole/wall along with accessories including making good disturbed surfaces with cement mortar (1:4) all as directed.

M & L in replacement of earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. (b) 4mm dia GI wire and 15mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate.

RINKU BROTHERS

M/s Bhullar Constructions

M/s MITTAL CONSTRUCTIONS

M/s Abnash Kumar Bholla

M/S VERMA BUILDERS & DEVELOPERS