MMPPNA_RIDF_XXXI_25_26_321 Construction of Road from Tengajuli to Baisnabpur road (Ch. 200.00m to Ch. 2800.00m) under Mukhya Mantrir Paki Path Nirman Achani (MMPPNA) under RIDF-XXXI of NABARD for the year 2025-26.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness. (I) By Manual means

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5m , transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause 301.5 . I) From private land

Construction of subgrade and earthen shoulder with approved materials obtained from borrow pits with all lifts and leads transporting to site, spreading grading to required slope and compected to meet requirement of table 300.2 with lead upto 1000m as per technical specifications clause 303.1 . I) From private land

Construction of granular sub base by providing well gaded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achive the desired density,complete as per technical specifications clause 401. (A)By Mixed in Placed Method: (ii) For grading II material

Water bound macadam. Providing, laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing,rolling with three wheel 80-100 KN static roller in stages to proper grade and cember, aplying and brooming stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required dansity as per technical specifications clause 405 . Hand broken mental from river boulder. Using stone screening A. By manual means. Grading No -III

Providing and laying interlocking concrete block pavement having thickness 80 mm as per technical specification clause 1504 Including Edge Restrain

Kilometre Stone.Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.ii)Ordinary Kilometer Stone (Precast)

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over alluminium sheeting 2 mm thick fixed on an angle iron of 25x25x4 mm supproted on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx60cm, 60 cm below ground level as per approved drawing and design. (All the steel work must be Tata/Sail/or any other approve brand (i) 60 cm equilaterial Triangle