GE/PKT-67/2019-20

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling of floor hearth and wall tiling incl cement morter bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete, complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, path & hardstanding finished even and fair complete all as specified and as directed.

M & L for plain Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), 75mm thick as in sub base complete all as specified and as directed.

M & L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M & L for coloured Glazed ceramic tiles in vertical surfaces, skirting, dado etc 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M & L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M & L vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as in skirting/dado including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Dismantling stone slabs and tiles laid dry or laid dry and pointed any description or thickness in floors, aprons etc complete all as specified and as directed.

M & L for 25mm thick Granite (of any type) (table rubbed and polished) including edge moulding, cutting hole/opening for tap and wash basin work in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M & L for chequred cement concrete tiles rubber moulded glossy finish 30 cm x 30 cm x 25mm thick , set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20mm thick secreed bed or bedding layer in CM 1:6 complete all as secified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed or bedding layer 20 mm thick in cement mortar 1:6 complete all as specified and as directed.

M & L for machine kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including rendering 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M & L for grinding and polishing to old kota stone flooring to obtain mirror finish complete all as specified and as directed.

M & L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete all as specified and as directed.

Demolition of stone/brick masonry in cement/ lime mortar complete all as specified and as directed.

M & L for brickwork with sub-class `B’ bricks, old size ,straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

M & L for brick work with sub class ‘B’ old size brick, straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 in one brick thick wall complete all as specified and as directed.

M & L for brick work with fly ash modular bricks,straight or curved on plan exc 6m mean radius built in CM 1:6 in one brick thick wall complrte all as specified and as directed.

M & L for brickwork with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as in ceiling complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs( for manholes etc.)chulla hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:6) complete all as specified and as directed. (Note:- Reinforcement shall be measured and paid separately).

M & L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs landing, balconies, canopies, deck slabs and in shelves etc complete all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Taking down chowkat or frames with shutter (W/O taking of shutter from the frame) area exc 1.5 Sqm but n. exc 4.0 sqm each complete all as specified and as directed.

Taking down chowkat or frames with shutter (W/O taking of shutter from the frame) area n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each and refixing in other/same opening incuding easing and adjusting complete all as specified and as directed.

Taking down shutters of any description n.exc 1.0 sqm each and refixing in other/same opening incuding easing and adjusting complete all as specified and as directed.

S & F pressed steel frame of size 165 x 60mm for doors with one or more rebates incl necessary lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

S & F pressed steel frame of size 105 x 60mm for doors with one or more rebates incl necessary lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

S & F 35 mm thick factory made second class hardwood rail and style plain framed panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 35 mm thick factory made second class hardwood glazed /gauzed and skelton door shutters, open rebated & prepared to recive glass/ gauged etc as in mosquito proof door shutter etc with out sash bars, edges of framing plain, chamfered or rounded,fitted with cut & mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part I section 8, clasue 8.20(a) and fixed to chowkats complete all as specified and as directed.

S & F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing , guaging and two coat synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 complete all as specified and as directed.

S & F MS butt hinges 100 mm size heavy weight cold rolled complete all as specified and as directed.

S & F MS barrel tower bolt 200mm long stove enameled black with bright bolt complete all as specified and as directed.

S&F MS pressed handle oval type, stove enamelled black 150mm size complete all as specified and as directed.

S & F MS Sliding door bolts 300mm long plate type stove enameled black with bright bolt not less than 12mm dia with and incl a min 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and as directed.

S & F 2nd class hardwood, plain fillets, square, rectangular or triangular in sectional area exc 13 sqcm and n.exc 25 sqcm, complete all as specified and as directed.

S & F glavanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S & F second class HW small fittings such as brackets of any type, latch and hinge blocks, brackets of any type, latch & hinge blocks, shaped door and window stops ad the like including al necessary labours articles n.exc 200 cucm each complete all as specified and as directed.

S & F MS butt hinges 65 mm size medium weight cold rolled complete all as specified and as directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (mimimum thickness of powder coating 50 micron) complete all as specified and as directed.

S & F powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges(3 Nos each side) type B-21, 100 mm long, anodised aluminum snap beading, screws etc. complete all as specified and as directed.

S & F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1No) complete all as specified and as directed.

S & F sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and as directed.

M & L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F 4 lever brass mortice lock, vertical type, size 100 mm complete all as specified and as directed.

M & L for 2nd class hard wood fillets square, rectangular or triangular in section, clean swan, secured with nails or brads of size 3 sqcm but n exc 6 sqcm complete all as specified and as directed.

S & F in repairs mild steel powder coated curtain rod 20 mm dia, 1mm thick complete as approver by GE complete all as specified and as directed.

S & F in repairs mild steel powder coated curtain rod brackets three in one fancy type suitable for 20mm dia rod with funnel complete as approver by GE complete all as specified and as directed.

Taking down eves gutter and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan necks etc., incl removal to store (mesured overall as fixed along the centre line over fittings the accessories) complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete all as specified and as directed.

S & F PVC (SWR) bend, ISI marked, any radius of 110mm bore complete all as specified and directed.

S & F PVC (SWR) bends, ISI marked any radius, 75 mm bore complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends with access door, ISI marked complete all as specified and as directed.

S & F PVC (SWR) 110mm bore vent cowl, ISI marked, complete all as specified and as directed.

S & F PVC (SWR) 110mm bore 'T' equal or unequal with access door ISI marked complete all as specified and directed.

S & F PVC (SWR) 110mm bore 'T' equal or unequal ISI marked complete all as specified and as directed.

S & F PVC (SWR) 75mm bore 'T' equal or unequal, ISI marked, complete all as specified and as directed.

S & F PVC (SWR) 75mm bore 'T' equal or unequal with access door, ISI marked, complete all as specified and as directed.

S & F in repairs 75mm PVC floor trap, ISI marked with grating incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.

S & F in repairs 125/110mm PVC(SWR) gully trap setting and jointing with waste pipe fixed in solvent cement complete all as specified and as directed.

Taking up or down steel tubing and connections 15mm bore incluidng removal complete all as specified and as directed.

All as per srl item No. 71.00 above but 20mm bore.

S & F GI tubes 15mm bore medium grade with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F GI tubes 20mm bore medium grade with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal Pattern ) white including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete and including making good to floor to match with adjoining surfaces complete all as specified and as directed

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding, making good to floor and all fittings (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repairs Wash basins, Vitreous China (flat back type) 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand , waste pipe etc complete all as specified and as directed.

Supply & fixing vitreous china urinal, half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling and 32mm dia waste pipe and pointing around urinal back in cement mortar complete all as specified & directed by Engineer-in-charge.

S & F urinal spreader cast copper alloy chromium plated suitable for 15 mm dia pipe complete all as specified and as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fixed in repairs Pillar taps fancy type cast copper alloy chromium plated with capstan head without letter Hot or Cold water screwed for 15 mm dia iron pipe complete all as specified and as directed.

S & F in repairs 15mm bore dia of pipe bib taps cast copper alloy, fancy type chromium plated, with capstan head screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F in repairs CP Grating with hole /with out hole of dia 125 mm complete all as specified and as directed.

S & F in repair stop valve/angle cock fancy type cast copper alloy, chromium plated with capstan head serewed for 15 mm dia iron pipe complete all as specified and as directed.

S & F in repairs PVC 10 ltrs capacity valveless symphonic action type low level flushing cistern including flush pipe, cantilever brackets etc. complete all as specified and as directed.

S & F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed.

S & F stainless steel jet with 1.0m long flexible PVC tube suitable to fix in the pedestal pan closet complete all as specified and as directed.

S & F in repairs sinks made of stainless steel 1 mm thick for kitchen with plugs washers and wastes, including bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs stainless steel kitchen plate rack of size not less than 31" x 36" x 10" complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and apply three coat of white wash complete all as specified and as directed.

M & L for complete removal of existing treatment of ceiling and apply three coat of white wash after preparation of surfaces, complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coat of distemper oil emulsion over two coat of smooth wall care putty finish complete all as specified and as directed.

M & L for complete removal of existing treatment of wall, preparation of surface and applying two coat of distemper oil emulsion over and including two coat of smooth wall care putty finish complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and apply two coat of cement base paint over a coat of alkali restistant primer complete all as specified and as directed.

M & L for complete removal of existing treatment of wall, preparation of surface and applying two coat of cement base paint over and including a coat of alkali restistant primer complete all as specified and as directed.

M & L for applying two coats of synthetic enamelled paint over a coat of pink primer over wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

M & L for preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M & L for preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M & L for applying two coats of synthetic enamelled paint over steel and iron surfaces of any description , not other wise described over 10 cm width or girth including preparation of new surfaces, complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500 & n exc1000 litres setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and including cleaning and removing all scale and dirt etc complete all as specified and as directed.

Dismantling water tanks PVC/RCC and removing from site (exc 250 and not exc 500 ltr cap) complete all as specified and as directed.

Dismantling water tanks PVC/RCC and removing from site (exc500 and not exc 1000 ltr cap) complete all as specified and as directed.

S & F rotational moulded polythene water storage tank (cylindrical vertical with closed top) three layered, ISI marked, hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and as directed.

S & F rotational moulded polythene water storage tank (cylindrical vertical with closed top) three layered, ISI marked, hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs complete all as specified and as directed.

S & F 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms) complete all as specified and as directed.

S & F in repair gun metal globe or gate valve for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in floors, aprons complete all as specified and as directed.

Excavation of mud phuska on roof n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft soil complete all as specified and as directed.

Removal of excavated soil/rocks to a distance exe 250 m but nexc 500m and depositing where directed at a level nexc 1.5m above the starting point complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for PCC (1:2:4) Type B1 (using 20 mm graded stone aggregate) as in roofs kerbs, bands etc complete all as specified and as directed.

M & L for cement concrete 1:2:4, type B1( using 20 mm graded stone aggregate), 40mm thick as in padding course on roof to maintain proper slope complete all as specified and as directed.

M & L for rendering 10mm thick on concrete surface (parapet/ facia/chajjas and the like) in CM 1:4 and finishing even and smooth without using extra cement with using WPC complete all as specified and as directed (Note:- WPC will be measured and paid separately).

Supply only liquid water proofing compound complete all as specified and as directed.

M & L for providing water proofing treatment with APP based polymeric membrane minimum weight 3.5 Kg/sqm and minimum thickness 3mm, reinforced with polyester non woven fabric (weight not less than 150gm/sqm) applied over and including one coat of oil based bitumen emulsion primer @ 0.3 liter/sqm(or as per the manufacturer instructions) including cleaning of surface throughly from dust, dirt and dismantling of old membrane any type and providing 15mm thick rendering in CM 1:4 with WPC (as per manufacturer instructions) followed by new membrane with torch application with 10 cm overlaps on sides and end joints. A coat of blown bitumen 85/25 @ 1.2 kg/sqm to be applied on top of memberane, finally painting the surface with bituminous aluminium paint @ 100gm/sqm. (Note:- WPC will be measured and paid separately) complete all as directed by Engr-in-Charge.

Demolition and breaking up drain pipes 150mm dia (salt glazed ware, AC or reinforced concrete) complete all as specified and as directed.

M & L for Salt-glazed stoneware pipes 150 mm dia fixed to roof with cement concrete 1:2:4 type B0 (12.5 mm graded stone aggregate) or cement mortar 1:4, complete all as specified and as directed.

M & L for cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate), 25mm thick as in levelling course on floor below tiles complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and re-plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm area on plan and n exc 1.5m in depth and getting out in any type of soil (sooft/hard) complete all as specified and as directed.

M & L for Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L for Cement Concrete 1:2:4 type B1 (using 20mm grded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L for 100mm thick concrete bed to drain pipes incl packing under and haunching against the sides of pipe after they are laid and tested in Cement concrete 1:3:6 Type C-2 for bore of pipe 150mm complete all as specified and as directed.

M & L reinforced cement concrete pipes 150mm bore, class NP3, laid and jointed complete with collars complete, complete all as specified and as directed.

M & L for Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching of of manholes, drain and similar work including form work and finishing all exposed surfaces complete all as specified and as directed

M & L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 20 mm thick other than fair faces of brick surfaces/stone masonry in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and as directed.

Returning filling including spreading levelling, watering and well ramming in layers n. exc 25cm complete all as specified and as directed.

Removal of excavated soil/rocks to a distance nexc 50m and depositing where directed at a level nexc 1.5m above the starting point complete all as specified and as directed.

M & L for cutting holes into existing manhole or through brick walls superficial area exc. 150 sqcm but n. exc. 400 sqcm built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B1(using 20 mm graded stone aggregate) as required, complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) 300mm internal dia complete all as specified and as directed.

M & L for 150 mm thick concrete bed to drain pipe of dia 300 mm in cement concrete 1: 3:6 type C-2(using 40mm graded stone aggregate) including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed.

M & L for reinforced concrete pipes, 300 mm bore class NP3, laid and jointed complete with collars, complete all as specified and as directed.

M & L for formwork to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, complete all as specified and as directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as spd and directed.

M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)(Make of 1.5 sqmm copper wire:

All as per srl item No 138.00 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per srl item No 138.00 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black,Earth- Green)(Make of 2.5 & 1.5 sqmm copper wire:

S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Supply and fixing ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F Storage type Electric water heater (Geyser) capacity 25 litrs BEE 5 Star rating PVC Body with complete accesoiries as specified and directed.

S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore dia of pipe complete all as specified and directed.

S& F Bib taps cost copper alloy, fancy type, screwed down high pressure with crutch or butter fly handle ,screwed for 15mm dia pipe or brass ferule complete all as specified and directed.

Supplying, laying and testing of GI pipe 15mm (1/2") dia "Medium Grade" including fittings and fixed to wall, ceiling or laid in floor, ISI marked complete all as specified and directed. .

S&F PVC connection for hot & cold water 15 mm dia 450 mm long superior quality with brass adopters complete all as specified and directed. .

S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.

Taking down ceiling fan by disconnecting the electric connection and dismantling the blades and removing from ceiling/roof of bldg by descrewing the nut, bolt etc complete all as specified and directed.(Note-Old u/s balance ceiling fans will be deposited in Store yard)

Rehanging only of ceiling fan and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm from ceiling rose or connector to fan including minor repairs such as replacement of locking pin, reel insulators, bolts, nuts etc and spraying one coat of synthetic enamel paint of required colourcomplete all as required and directed by Engr-in-charge.

S & F in replacement of CFLs with LED smart Lamp, B22 type, 14 watt, complete all as specified and directed.

S & F energy saving decorative LED box type with LED Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. (Note power factor should not be less than 0.95) complete all as spd and directed.

Supply and fixing, testing and connecting the star rated ceiling fan 230 volts,single phase of 1200mm sweep double bearing type with and including down rod,canopy cover etc and connecting with 3core flexible copper conductor of 0.50 sq mm and including writing of MES No with black enamelled paint 2 cm high complete as directed by engr-in-Charge.

S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases for fixing DB and making good the distrubed wall surfaces to match with existing specification complete all as specified and directed .

S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases for fixing DB and making good the distrubed wall surfaces to match with existing specification complete all as specified and directed .

M & L for MCB Single Pole 240 volts any rating from 20 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. .

M & L for MCB SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and PCC chamber with PCC 1:2:4 (Nominal mix ) and 3.15 mm thick MS sheet cover including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. (Note: Excavation and earth work is deemed to be included in the rates quoted).

Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of UG cable and getting out in soft/loose soil complete all as specified and directed.

Returning filling in and including spreading, watering and well ramming in layers not exceeding 25 cm thick in soft /loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Sand cushioning for under ground cable upto 8 cm before laying the cable and 15 cm after laying and stretching the cable and punned down upto 18 cm thick to form a bed.The punning shall be done by hand complete all as specified and directed.Note :- Punned thickness 18 cm shall be considered for payment purpose.

Material and labour for sub class 'B' bricks well burnt old size laid dry flat perpendicular to the length of cablefor protection of cable complete all as specified and directed.

Supply and fixing in replacement of GI tubing medium grade of 40 mm nominal bore of pipe in trenches/under roads/ under culverts/under paths/under floor/on walls /with pole in new position with screwed sockets joints, together with all tube fittings (such as bends, elbow, tees, short places connections back nuts, diminishing places, caps, plugs and union etc) complete all as specified and directed .

Supplying, laying and testing of XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 16 Sqmm 2 core and taking down of old unservicable /brunt electric cable complete all as specified and directed. Note:- Earth work including excavation, returning filling , removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule.

Supplying, laying and testing of XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 16 Sqmm 4 core and taking down of old unservicable /brunt electric cable complete all as specified and directed. Note:- Earth work including excavation, returning filling , removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the same for distrubed surfaces complete all as spd and supply and fixing propeller type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd.

S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i)The DB shall be VTPN series of Schenieder Cat Part No:- A9HVD04L or equivalent in any of the make mentioned in list of product . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi)MCCB's and MCB's should have a same make as of DB.

S&F in replacement sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit complete and making good the disturbed surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed by Engineer-in-charge including taking down of existing un serviceable sub main wiring complete.

S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 1,14,582.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder within 28 days from the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249

GANDOTRA CONSTRUCTION CO

OMKAR SHARMA AND CO

Raghbir chand

kay gee construction co

M/S SALARIA BUILDERS