GF 2025-26

Supplying of 32mm dia PVC 6 KSc pipe with ISI marked including transporting the same to the site directed by the departmental officers etc complete as standard specifications

Supply and Fixing of 20W 4 Feet LED Fitting with LED (PWD SOR-M1273-P.No:121)

Supply and Fixing of 1.5 Hp Motor for Water Supply Work As per Bill

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supplying and fixing of M.S. sheet window consists of frame and shutters the frame will be of 40 mm x 40 mm x 6 mm M.S. angle around the intermediate of frame will be of T section using 40 mm x 6 mm and 25 mm x 6 mm M.S. flat the shutters will be of 18 gauge of M.S. sheet with 'L' angle of size 35 mm x 35 mm x 6 mm alround in each leaf and cross bracing of M.S. flats 25 mm x 6 mm including cost of tower bolf of 19 mm dia M.S. bars with necessary hook and arrangements including cost of materials clamps for giving of windows in the wall cutting, bending, welding and fixing charges etc.,

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.