Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC B 72 RAJUL TOWNSHIP TILHARI MANDLA ROAD JABALPUR MP PIN 482021 | JABALPUR | MADHYA PRADESH | 482021 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹32.9 L+₹2.0 L (6.40%)Rejected-Finance 114 BARH CHONDI BARH PATNA BIHAR 803213 | PATNA | PATNA | BIHAR | 803213 | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹33.0 L+₹2.0 L (6.55%)Rejected-Finance | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹34.0 L+₹3.1 L (9.86%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L4 | Rejected-Finance Fourth lowest amount quoted | |
| 5 | L5₹34.3 L+₹3.4 L (11.0%)Rejected-Finance 316 A VIJAY NAGAR EXTENSION RANJHI MAIN ROAD JABALPUR MP PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L5 | Rejected-Finance Fifth lowest amount quoted |
| Sl No | Description | Qty | Unit | MAA SHARDA CONSTRUCTION L2 | M/S BHARTI ENTERPRISES L3 | GHANI CONSTRUCTION L1 | SR ASSOCIATES L9 | Shri Balaji Associates L7 | R R VISHWAKARMA CONSTRUCTION CO L8 | RAM ASSOCIATES L6 | M/S A.P.M. CONSTRUCTION CO. L5 | a k builders L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. | 50 | RM | 9 ₹450 | 30 ₹1,500 | 5 ₹250 Lowest | 9 ₹450 | 15 ₹750 | 10 ₹500 | 10 ₹500 | 9 ₹450 | 10 ₹500 |
| 2.00 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. | 23 | Qtl | 99 ₹2,277 | 350 ₹8,050 | 100 ₹2,300 | 350 ₹8,050 | 200 ₹4,600 | 50 ₹1,150 Lowest | 200 ₹4,600 | 99 ₹2,277 | 100 ₹2,300 |
| 3.00 | M&L framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of MS 'C' channel, angle iron, MS plate, Nut & Bolt etc for water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed | 500 | Kg | 90 ₹45,000 | 90 ₹45,000 | 85 ₹42,500 Lowest | 112 ₹56,000 | 95 ₹47,500 | 90 ₹45,000 | 95 ₹47,500 | 90 ₹45,000 | 90 ₹45,000 |
| 4.00 | S&F Mild Steel framed work as in doors or gates (Ornamental/ Design type ) of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; incl errection and fabrication also fastening and fixing complete all as specified and directed | 600 | Kg | 90 ₹54,000 | 115 ₹69,000 | 85 ₹51,000 Lowest | 120 ₹72,000 | 120 ₹72,000 | 90 ₹54,000 | 95 ₹57,000 | 100 ₹60,000 | 110 ₹66,000 |
| 5.00 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting/welding, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. | 1,200 | Kg | 87 ₹1,04,400 | 90 ₹1,08,000 | 80 ₹96,000 Lowest | 108 ₹1,29,600 | 88 ₹1,05,600 | 90 ₹1,08,000 | 85 ₹1,02,000 | 95 ₹1,14,000 | 90 ₹1,08,000 |
| 6.00 | Dismantling fencing wire mesh/chain link any typeand any size complete all as sepcified and directed. | 100 | Sqm | 9 ₹900 | 30 ₹3,000 | 5 ₹500 | 30 ₹3,000 | 2 ₹200 Lowest | 10 ₹1,000 | 20 ₹2,000 | 10 ₹1,000 | 10 ₹1,000 |
| 7.00 | Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed
Note : Weight of chain link shall be assessed by BOO conveyed by GE. | 400 | Kg | 105 ₹42,000 | 115 ₹46,000 | 100 ₹40,000 | 138 ₹55,200 | 95 ₹38,000 | 100 ₹40,000 | 90 ₹36,000 Lowest | 105 ₹42,000 | 100 ₹40,000 |
| 8.00 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. | 100 | Sqm | 72 ₹7,200 | 40 ₹4,000 | 20 ₹2,000 Lowest | 40 ₹4,000 | 50 ₹5,000 | 20 ₹2,000 Lowest | 40 ₹4,000 | 29 ₹2,900 | 30 ₹3,000 |
| 9.00 | Excavating in post holes or single holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface of any type of soil complete all as specified and directed. | 50 | Each | 72 ₹3,600 | 70 ₹3,500 | 50 ₹2,500 Lowest | 50 ₹2,500 Lowest | 50 ₹2,500 Lowest | 50 ₹2,500 Lowest | 75 ₹3,750 | 65 ₹3,250 | 50 ₹2,500 Lowest |
| 10.00 | M&L cement concrete 1:3:6, type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. | 2 | Cum | 3,500 ₹7,000 | 2,200 ₹4,400 Lowest | 2,800 ₹5,600 | 2,800 ₹5,600 | 3,500 ₹7,000 | 3,000 ₹6,000 | 3,500 ₹7,000 | 3,200 ₹6,400 | 3,200 ₹6,400 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 Jul 2025, 6:00 pmClosed
Lt Col P Aditya Deepak, GE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
REPAIR TO DRAIN, PATH, CULVERT, COMPOUND WALL, FENCING, GATE AT VARIOUS LOCATIONS OF MCMM UNDER AGE B/R-I OF GE (EAST) JABALPUR
2025_MES_718914_1
8778/E8
Open Tender
Civil Works
Item Rate
210 days
Garrison Engineer (East) Jabalpur
Class D Cat a (i)
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer (East) Jabalpur
₹90,000
Yes
27 Aug 2025
7 Jul 2025
30 Jul 2025
7 Jul 2025
28 Jul 2025
21 Jul 2025
7 Jul 2025 - 14 Jul 2025
Amount
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of MS 'C' channel, angle iron, MS plate, Nut & Bolt etc for water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed
S&F Mild Steel framed work as in doors or gates (Ornamental/ Design type ) of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; incl errection and fabrication also fastening and fixing complete all as specified and directed
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting/welding, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
Dismantling fencing wire mesh/chain link any typeand any size complete all as sepcified and directed.
Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed Note : Weight of chain link shall be assessed by BOO conveyed by GE.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.
Excavating in post holes or single holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface of any type of soil complete all as specified and directed.
M&L cement concrete 1:3:6, type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M&L cement concrete 1:2:4, type B2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
Demolition of brick work built in CM or cement lime mortar including all quoins, arches etc complete all as specified and directed
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as sepecified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil complete all as specified and directed.
M&L cement concrete 1:4:8, type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter rough finished surfaces of concrete complete all as specified and directed.
M&L RCC nominal mix 1:2:4 type B-1, (20 mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams bases for column etc basement slabs under reamed piles and mass concrete complete all as specified and directed.
Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchians to rough finished surfaces of concrete complete all as specified and directed.
M&L RCC nominal mix 1:2:4, type B-1 (20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete completed all as specified and directed.
M&L RCC 1:2:4 nominal mix type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with and including mild steel (annealed) wire not less than 0.90 mm dia complete all as specified and directed.
All as per above item No 22 here-in-before but 8 mm dia and above upto 10 mm dia as in stirrups, spacers and binders complete all as specified and directed.
M&L old size bricks with fly ash bricks straight or curved on plan exc. 6m mean radius and setting in cement mortar 1:6 etc complete all as specified and directed
M&L except brick work with old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius obtianed from the demolition and built in CM 1:6 complete all as specified and directed.
M&L rendering 10mm thick in CM 1:6 on concrete surfaces finished even and fair without using extra cement complete all as specified and directed.
M&L providing precast RCC jallies type B-0 (1:2:4) (12.5mm graded stone aggregate) as in louvers and jallies, 50mm thick (measured solid) set CM 1:4, including all mouldings but excluding frame complete all as specified and directed. Note : Steel TMT bars shall be measured and paid seperately
M&L PCC (1:2:4) type B-1 (20mm graded stone aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed
M&L cement concrete 1:3:6 type C-2 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
Extra for forming fair finished drain or channel n.exc 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
M&L 300mm dia reinforced cement concrete pipe CL NP-2 laid and joionted complete with collars complete all as specified and directed.
M&L PCC 1:4:8 type D2, 40mm graded stone aggregate as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 300 mm bore complete all as specified and directed.
S&F repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed each line wire to be measured) complete all as specified and directed
M&L mild steel bolt machine made with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and one hexagone or square but length of bolt exc 5 cms but n.exc 10cm long dia shall be of 5 to 10mm dia complete all as specified and directed
M&L preparing new steel surfaces and applying two coat of synthetic enameled paint over a red oxide primer exc 10 cm width or girth complete all as specified and directed.
M&L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Returning filling in including, spreading, levelling watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed.
Removing excavated material exc. 250 m but n.exc 500 m and depositing where directed complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L PCC 1:4:8 type D2, 75mm thick using 40mm graded stone aggregate as in sub base complete all as specified and directed.
M&L PCC 1:2:4 type B1, 100mm thick using 20mm graded stone aggregate and finish the surface even and smooth without using extra cement complete all as specified and directed.
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L 80 mm thick factory made rubber made glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-40 grade complete all as specified and directed
M&L 60 mm thick factory made rubber moulded glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed.
S&F factory made rubber moulded glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Schedule of credit amount of Rs 156825.00 to be deducted during AOC.
MAA SHARDA CONSTRUCTION (BID ID -3369985)
M/S BHARTI ENTERPRISES (BID ID -3372392)
a k builders (BID ID -3374050)
M/S A.P.M. CONSTRUCTION CO. (BID ID -3367980)
RAM ASSOCIATES (BID ID -3374466)
Shri Balaji Associates (BID ID -3374183)
R R VISHWAKARMA CONSTRUCTION CO (BID ID -3374351)
SR ASSOCIATES (BID ID -3373887)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .