Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹49.4 L+₹7.4 L (17.7%)Rejected-Finance R O RAWALPORA WANBAL YAIYAL TEH DISTT SRINAGAR J K PIN 190005 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | L2 | Rejected-Finance Other than L1. | |
| 3 | L3₹50.0 L+₹8.1 L (19.3%)Rejected-Finance 1 AL SHEIKH COMPLEX 1ST FLOOR PEERBAGH CHOWK SRINAGAR PEERBAGH SRINAGAR BUDGAM JAMMU KASHMIR 190014 | BUDGAM | JAMMU AND KASHMIR | 190014 | L3 | Rejected-Finance Other than L1. | |
| 4 | L4₹58.7 L+₹16.8 L (39.9%)Rejected-Finance | L4 | Rejected-Finance Other than L1. | |
| 5 | L5₹59.6 L+₹17.7 L (42.1%)Rejected-Finance | L5 | Rejected-Finance Other than L1. |
Tender Value
₹69 L
EMD Value
₹1.3 L
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CDR HQ 134 WKS ENGR
HQ 134 WORKS ENGINEER PIN 914134 CO 56 APO
REPAIR MAINT AND ALLIED WORKS AT CERTAIN LOCATIONS OF TECH AREA OF ARMY AVN SQN AT SHARIFABAD MIL STN UNDER AGE I CIF K
2023_MES_602389_1
134WE-09(T)/2023-24
Open Tender
Civil Works
Item Rate
180 days
SHARIFABAD
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
AGE (I) CIF (K)
₹1.3 L
Yes
17 Aug 2023
9 Jun 2023
17 Jul 2023
10 Jun 2023
15 Jul 2023
1 Jul 2023
16 Jun 2023 - 23 Jun 2023
Amount
Demolition of brick work or stone masonry, built in cement mortar, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 Mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and and directed.
All as per Srl item No. 3.00 here-in-before but except stone.
Taking down cement plaster on stone wall / brick wall etc including racking out of joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed.
M&L for cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in copings, roof kerbs or mud stops, benching, haunching including necessary formwork, weathering/ slightly rounded or camfered angles, complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings with ends of bars shouldered and or riveted or forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work, conforming to Fe-290, Gde-E-165, complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
M&L for preparation of old steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern, complete all as specified and directed.
Demolition and breaking up drain pipes 300mm bore (SGSW, AC or reinforced), set in cement mortar, complete all as specified and directed.
M&L for 300mm bore reinforced concrete pipes, Class NP3, laid in trenches and jointed in CM 1:1 and tested, complete all as specified and directed.
M&L for concrete bed for 300mm bore drain pipe in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.
Demolition of reinforced cement concrete and paving exc 15cm thick below or above ground level, complete all as specified and directed.
Demolition of cement concrete in ground floor and paving not exc 15cm thick below or above ground level, complete all as specified and directed.
M&L for RCC (Nominal mix) 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc, complete all as specified and directed.
Form work for rough finished surface to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floors, hardstanding, manholes, drains etc, finished the surface even and fair without using extra cement, complete all as specified and directed.
M&L for machine pressed precast coloured concrete interlocking paver blocks of any shape and size, confirming of IS-15658 : 2006 of 60mm thick M-35 Grade, laid and jointed with grey cement and pigment, complete all as specified and directed.
M&L for 25mm thick sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
M&L for 150mm thick PCC 1:2:4, type B-2 (using 40mm graded crushed stone aggregates) as in flooring, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for forming 12mm thick expansion joints 150mm deep filled with preformed bituminious filler and top 30mm primed and sealed with sealing compound Grade 'A', complete all as specified and directed.
M&L for forming contraction joints (Dummy joints) 65mm deep x 10mm wide and filled with sealing compound Grade 'B', complete all as specified and directed.
M&L for forming construction joints 30mm deep x 10mm wide and filled with sealing compound Grade 'B', complete all as specified and directed.
Dismantiling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises, complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in levelling coarse of flooring, complete all as specified and directed.
M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick each, as in path, floors etc, set and jointed with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.
Dismantling posts or struts (wood, steel or RCC) of any section including taking out embedded portion in natural ground and making good disturbed surface, complete all as specified and directed.
Excavation in post holes not exc 0.50 Cum each and getting out in hard / dense soil, returning, filling in and ramming earth or broken rubble mixed with earth in layers not exc 25cm thick, complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling in and mass concrete, complete all as specified and directed.
M&L for mild steel angle iron, flat iron work as in post or struts, drilling holes, notching for wire etc, cutting and twisting necessary drilling, bolting and riveting or welding, confirming to Fe-290- Gde E-165, complete all as specified and directed.
Supply only chain link mild steel galvanised fencing made out of 4mm dia GI wire of mesh 50x50mm in size, weight not exc 4 Kg / Sqm, complete all as specified.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire, complete all as specified and directed. Note :- MS flat and round bars to be measured and paid separately under relevant relevant items of this BOQ.
S&F galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at cross with and provision of galvanized mild steel wire, staples or steel pins etc, complete all as specified and directed.
S&F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washer and one hexagonal or square nut length of bolt exc 5cm but not exc 10cm, dia of neck 5-10mm, complete all as specified and directed.
M&L for mild steel round bars 8mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof coverings, complete all as specified and directed.
S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc with grade of zinc coating 275, fixed upto 8 mtr height, complete all as specified and directed.
All as per Srl item No. 42.00 here-in-before but except sheeting.
S&F 0.80mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws / self tapping screws and washers, complete all as specified and directed.
All as per Srl item No. 44.00 here-in-before but except sheeting.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in ridges, hips, valley etc, fixed with self tapping screws, complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent sheet with two corrugations side lap, fixed with coach screws /self tapping screwes and washers, complete all as specified and directed.
M&L for MS plate, ISMC, MS angle Gde Fe- 410-W, E-250, Quality 'A' as in purline, square cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (including rivet or nut and bolts) providing and fitting angle cleats, gussete plates etc also for wedging plumbing, truing up and fixing, complete all as specified and directed.
Dismantling expanded metal, any thickness or mesh, fixed with steel or wooden fillets if any, not exc 4 Kg / Sqm, complete all as specified and directed.
S&F expanded metal not exc 4 Kg / Sqm, cut to length, bent to shap required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples, complete to wood or steel members, complete all as specified and directed.
All as per Srl item No. 51.00 here-in-before but using material retrived from dismantiling.
M&L for preparing bituminous surface of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the line not exceeding 10cm wide on roads, pavement with hot applied thermoplastic road marking paint of approved white or golden yellow colour confirming to BS-3262-1989 with special applicator machine all as per manufacturer's instructions, complete all as specified and directed.
S&F road sign boards comprising of 1 plate of size 1200mm x 900mm, fixed one above the another, made of 2mm thick aluminium sheet duly framed in 40x40mm square MS pipe of 16 gauge & provided with 25x25mm hold fasts. The plates fixed with aluminium rivets and written on both sides indicating the direction with single arrow on each plate with computer cut letters and signs (Reflective type) as directed by Engineer-in-Charge of appropriate size and white in colour and 12mm reflective border all round the plates over retro reflective sheeting of Avery Dennison HIP base blue. The board (plates) supported with bolts over a pair of legs made of MS square tubes 75x75mm of 16 gauge sheet of length (height) 11' (feet) each above ground including embedding in PCC 1:2:4, type B-1, blocks of size 60cm x 60cm x 75cm making post holes & earth work. The pipes to be painted with black & white Ist quality synthetic enamel paint two coats over a coat of red oxide primer (Pegged sign boards fully reflective), including dismantling and removing of old sign board, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, 1st quality (square/rectangular), area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, 1st quality (square/rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 350x250x7mm thick or 450x350x7mm thick as on verticle surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, fixed over and including 10mm thick plaster in CM 1:4, complete all as specified and directed.
M&L for 10mm thick vitrified ceramic tiles (Dark shade/ double charged / ultracharged), Square/rectangular, polished, area of each tiles exc 0.42 Sqm but not exc 1.0 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.
M&L for 10mm thick vitrified ceramic tiles (Dark shade/ double charged / ultracharged), Square/rectangular, polished, area of each tiles exc 0.42 Sqm but not exc 1.0 Sqm as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, fixed over and including 10mm thick plaster in CM 1:4, complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / path, finished the surface even and smooth without using extra cement and joints shall be filled with mixture of bitumen and sand (1:3) by wight, complete all as specified and directed.
Taking up or down 15mm bore steel water tubing and connection including cleaning for re-fixing or removal to store, complete all as specified and directed.
M&L for 25mm outer dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16), UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded poly propylene random fittings, fixed complete to walls, ceiling or in floors etc, complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves, for water tubing etc and making good, cutting exc 10cm but not exc 20cm in girth in brick walls, complete all as specified and directed.
S&F in replacement vitreous china wash hand basin of size 550mm X 400mm, white, flat back excluding taps but including mild steel brackets of suitable size and 32mm dia CP waste coupling, complete all as specified and directed.
S&F in replacement vitreous china wash down water closet pan (pedestal pattern) with plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe), complete all as specified and directed.
S&F in replacement 10 Litres capacity PVC valveless syphonic action flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia, complete all as specified and directed.
S&F in replacement 15mm dia bib tap, CP, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, scewed for iron pipes or for brass ferrule, complete all as specified and directed.
S&F in replacement 15mm dia, chromium plated, fancy type, pillar tap, cast copper alloy with capstan head, scewed down, high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F in replacement 15mm dia stop valve /angle valve, chromium plated, fancy type with long shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, complete all as specified and directed.
S&F in replacement 15mm dia PVC connection 450mm long with PTMT nuts of superior quality, complete all as specified and directed.
S&F in replacement health faucet (ABS body) mild steel chromium plated, suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and directed.
Dismantling of boarding, any descripton, fixed in any position, complete all as specified and directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.90mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mtr length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed.
M&L for 4mm thick non asbestos fibre cement building board, fixed or laid or inserted to timber/ GI/ Aluminium framework with screws on ceiling, complete all as specified and directed.
Dismantling timber scantling /framed work 40 Sqcm and over in section, framed in any position, complete all as specified and directed.
M&L for 2nd class soft wood as in scantling, timber, fixed clean swan, complete all as specified and directed.
M&L for 2nd class soft wood, plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 6.0 Sqcm but not exc 13.0 Sqcm, complete all as specified and directed.
S&F in repair 12mm thick perforated particle board / tiles as in wall paneling for insulation and accoustic purposes, 60cm x 60cm in size, fixed with nails to timber frame work or with staples on snap grid for wall paneling, complete all as specified and directed.
S&F in repair 12mm thick perforated particle board / tiles as in ceiling for insulation and accoustic purposes, 60cm x 60cm in size, fixed with nails to timber frame work or with staples on snap grid for ceiling, complete all as specified and directed.
S&F 25mm thick bonded mineral wool blanket slab made from glass density 24 Kg/Cum and fixed as per manufacturer’s instructions, complete all as specified and directed.
M&L for filler coat with grey filler or liquid wood filler, transparent and bringing forward surfaces to smooth even finish, complete all as specified and directed.
M&L for picking the existing epoxy floor and grinding mechanically to make floor level and cleaning with solvent based cleanser of Pidilite or equivalent as approved by AGE (I) and applying with mop or brush, cleaning the surface with water after drying etc and applying epoxy resin on floor of overall thickness 5mm including 1mm thick top coat (Top coat color shall be decided by AGE(I)). The material will be handeled, stored and applied strictly by authorised applicator as per manufacturer's instructions, complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking of shutter from the frame) of any description alongwith fittings not exc 1.5 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking of shutter from the frame) of any description alongwith fittings exc 1.5 Sqm but not exc 4.0 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.
S&F anodised aluminium frame (powder coated minimum thickness of powder coating 50 micron) for doors, window, partition wall with one or more rebates including joining cleat for fixing, rubber packing, anodised aluminum snap on beading for fixing glass panes in frame etc, complete all as specified and directed.
S&F anodised aluminium (powder coated minimum thickness of powder coating 50 micron) door shutter, aluminum section weighting 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc, complete all as specified and directed.
S&F anodised aluminium (powder coated minimum thickness of powder coating 50 micron) sliding window, ventilator shutters without sash bar, aluminium sction weighting 0.55 Kg per Sqm including necessary jointing cleats, glazing, clips, rubber packing, anodised aluminum snap, beading, screws etc, complete all as specified and directed.
S&F brass mortile lock vertical type, 100mm size 4 levers, complete all as specified and directed.
S&F 12mm thick prelaminated particle board, interior grade, prelaminated on both side with decorative choice lamination and fixed with screws to aluminum frame work, complete all as specified and directed.
S&F door closer hydraulically regulated of cast iron body, designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer and including 3mm thick wall care putty, complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of walls and applying two or more coats of 100% Premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS : 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over surface, complete all as specified and directed.
Notes :- An amount of Rs. 2,66,881.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.
M/S LATIF AHMAD BABA CONSTRUCTION
M/S Sofi Brothers
M/S Rather and Sons
M/S B A Traders
LUXMI ELECTRONIC WORKS
M/S RATHER CONSTRUCTION CO
VISHWA MITTAR PACHYALA
M/s Sekinder Paul Sharma
ASIA ENTERPRISES
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .