8267 ADDITION ALTERATION OF WORKERS TOILETS BATH SHOWERS CLOOR TILING OF BUILDING NO P 51 OF C 65 YU DEPT ADDITIONAL ALTERATION OF PUBLIC TOILETS NEAR TORPEDO DOCK ADDITIONAL ALTERATION TO TWO WHEELER PARKING SHED NEAR PATENT SLIP WAY AT NAVAL DOCKYA

Amount

Taking down chowkats or frame with shutter ( without taking off shutter from frame), n exc 1.5 sqm each complete all as specified and directed.

All as per item 1 above but exc 1.5 sqm but not exc 4 sqm each.

Demolition of plain cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing) and rubbish off the premises out of MD Land complete all as specified and directed.

Taking down cement plaster on brick/ surfaces built in cement mortor including raking out joints, bading for key scrubbing down with water etc complete all as specified and directed.

Taking down CI Pipe 75/100mm bore dia of any description and size fixed to wall etc complete all as specified and directed.

S&F vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing blts, flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

S&F in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

S&F brass CP towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

S & F in repairs for toilet paper holder of viterous china box type white coloured fixed to walls withchromium plated brass screws CP brass fixed to walls etc, fixed in repairs complete all as specified and directed.

S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as directed.

S&F in repairs of vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and directed.

S & F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified.

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

M&L for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.

S&F fixed in repairs Oval type Wash hand basin vitreous china (flat back) size 620 x 726 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

Dismantling of 75mm or 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenhes if required complete all as specified and directed.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

M & L for granite stone (of any type) slab 20mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

M&L for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof complete all as specified and directed

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed.

S&F in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Demolition of brick work or stone /boulder masonry (in portion), built in cement mortar, including all quoins, arches, pillars, etc. complete all as specified and directed.

M & L for brick work with old size sub class 'B' bricks straight or curved on plan and built in CM (1:6), all as specified and directed.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

M & L Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring,cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 5 km complete all as specified and directed.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors including taking down old 15mm bore, GI tubing all as specified and directed complete all as specified and as directed.

As per item No 32 above but 20mm dia medium GI Pipe

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and directed.

S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and directed.

S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and directed.

S&F 110mm dia PVC ( SWR) grade double T with access doors including fixing clips complete all as specified and directed.

All as per item No 37 above but 75mm dia

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with silvent cement

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M&L for cement concret type B2 (1:2:4) 40mm graded aggregate in foundation filling and filling of post holes complete all as specified and directed.

S&F for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quqlity-A, as in post, runners, rafters, purlins, trusses, steps etc fixed with connecting plates including bending, welding etc complete all as specified and directed.

S&F for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding etc complete all as specified and directed.

S&F Steel work in tubular trusses 50mm dia and posts incl special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

M&L 100mm thickness PCC 1:4: 8 type D2 using 40mm graded stone aggregate as sub base/sub floor all as specified and directed.

M&L for Providing 100mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor.and surface shall be finished with broom including necessary form work as required, all as specified and directed.

Glass dividing strip 3mm thick 38mm wide inserted in position conform to design all as specified and directed.

M&L 15mm thick cement plaster in 1:4 on brick walls (on fair faces) finishing the surface even and smooth w/o using extra cement rough finished surfaces complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

S&F 0.80mm thickness of in mm plain galvanised mild steel sheeting in ridges, hips, valley gutter, drips ;and straight flashings (length and girth as fixed) with grade of zinc coating 275mm complete all as specified and directed.

Preparation of black bituminous road surface and applying thermo plastic road marking paint (including dashes, arrows, letters etc) minimum 2mm thick, with an applicator machine and heated mixer, with stirring mechanism at temperature 160°C, laid uniformly with width as directed, paint conforming to BS-3262 part I & II of 1989 etc, complete as per manufacturers instructions all as directed.

S&F powder coated aluminium frame / shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, screws, handles, hinges, tower bolts etc. complete all as specified and as directed. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) Glazing and wire mesh shall be measured and paid separetely for supply only as the labour element included in this item. (ii) Item shall be paid as per weight of aluminium section. (iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

S&F 5mm thick toughened glass for partition with and including drilling holes, edges polishing, fixing arrangement etc. complete all as specified and as directed.

S&F 12 mm thick Medium density fibre board, exterior grade, fixed to timber/ Aluminium frame work with screws complete all as specified and directed.

S&F white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc. complete all as specified and as directed.

S&F fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs 15 mm bore of pipe complete all as specified and directed.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Stainless Steel but hinges 100mm size complete all as specified and directed.

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and directed.

S&F Extrude aluminium anodised alloy handles, fabricated type 150mm size complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even all as specified and directed.

M&L for Providing 100mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor.and surface shall be finishead with broom including form work as required all as specified and directed.

M & L for Coloured glazed ceramic tiles in vertical surface 350X250X7mm/ 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting/dado, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and directed.

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors/ wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs all as specified and directed.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equivalent as approved by GE)

S&F PVC Connections 15mm size with PTMT nuts of length 600mm all as specified and directed.

Removal of debries, old concrete, spoils etc exc. 5 Km complete all as specified and as directed outside MD land

Taking down carefully old U/S point wiring copper / Aluminum (light / fan / Sockets / power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material form site and making good to disturbed surfaces complete all as specified and as directed.

Taking down old U/S MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces all as directed all as specified

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, (Make: Havells/ Finolex/ Plaza) drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC moulded box with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One 5A flush type switch socket point on same board board

One 5A flush type switch socket point on independent board

One light point controlled by two way 5A switch

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza (c) Switch socket measured & paid separately.

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC moulded box/hylem sheet for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza (c) Switch socket measured & paid separately.

S & F modular switch 1 way 6A, 1 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular switch 2 way 6A, 1 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular switch socket combination 6/16A, 2/3 pin, combined 2 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed. Make: Anchor/Roma plus/Legrand

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed.

S & F modular box suitable for 12 modules complete all as specified and as directed.

S & F modular white cover plate suitable for 12 modules with frame complete all as specified and as directed.

S & F modular box suitable for 8 modules complete all as specified and as directed.

S & F modular white cover plate suitable for 8 modules with frame complete all as specified and as directed.

S & F modular box suitable for 6 modules complete all as specified and as directed.

S & F modular white cover plate suitable for 6 modules with frame complete all as specified and as directed.

S & F modular box suitable for 4 modules complete all as specified and as directed.

S & F modular white cover plate suitable for 4 modules with frame complete all as specified and as directed.

S & F MCB SPN 63 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F MCB SPN 40 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make: Legrand cat No 4086 18 or equivalent Cat part in Seimens/GE.

S & F MCB SP 6-32 Amps,10KA, 'C' series 240V complete all as specified and directed. Make : Legrand/Seimens/GE

Supply and fixing in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT 2X2 or equivalent Cat part in Surya / Philips

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 10 or equivalent Cat part in Siemens/GE

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 11 or equivalent Cat part in Siemens/GE

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 12 or equivalent Cat part in Siemens/GE

S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed. Make :Legrand cat No 50789 11or equivalent cat No. in GE/Seimens/C&S

S&F in repairs of MCB sheet metal four pole enclosure for holding MCB of 63Amp, 3 Pole, 10KA capacity including fixing accessories etc. complete all as specified and directed. Make :Legrand cat No 5077 93 or equivalent cat No. in GE/Seimens/C&S

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F wall mounted fan oscilating type working as single phase AC, 230 volts of sweep 300mm including necessary fixing bracket/grouting bolts on walls etc complete including connecting up Make:- Crompton / Bajaj / Philips

S & F Ceiling fan 5 Star Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by completed all as specified and directed. Make: Havells/CG/ khaitan

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) , or equivalent cat part in Crompton/Wipro /Philips

S & F in repirs 9W, 230 V, LED bulk head in engineering plastic housing with clear prismatic diffuser. etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-01 No. including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. CG80IB6WLED/W (e-TARTA SERIES) , or equivalent cat part in Crompton/Wipro /Philips

Supply and fixing walll/surface mounted 10W LED, 2 feet batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed. Make : C&S cat part No. LTTB2F10WLED/W or equivalent in CG/Wipro/Bajaj / Philips

S&F 150 Watt, LED flood light with PDC aluminium housing with aim & adjustable bracket, Matt finished reflector for glare elimination, SMD LED with secondary lens complete with all acessoriesnd complete all as specified and directed. Make: C & S cat part No. LTEF150WHPLED (Orion 3.0 series), or equivalent cat part in Crompton / Wipro / Philips

M&L for sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

M&L for sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in andincluding non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

M&L for sub-main wiring with 2 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in andincluding non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

Supply and lay PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 6 sq. mm 2 core with suitable accessories laid in trench/ duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of thimbles/lugs & cable gland etc is incl in quoted rate and no extra payment will be made for it. Make- Polycab/ Havells/ Finolex

Supply and lay PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 10 sq. mm 2 core with suitable accessories laid in trench/ duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of thimbles/lugs & cable gland etc is incl in quoted rate and no extra payment will be made for it. Make- Polycab/ Havells/ Finolex

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected and incl galvanised earth lead wire of 4mm dia by means of nuts & bolts, check nuts and wassher of galvinsed incl PCC (1:2:4) type B-1 cover reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25mm x 25mm x 3mm excavation and earth work in any type of soil, charcoal dust, salt light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distrubution board complete all to as shown in electrical plate No 3 of MES sch 2009 (part-I) connected main switch board all as specified and testing on completion .

S & F galvanised iron strip 25 x 4 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe of fixed to poles or any other indicated for loop earthing etc. as requied all as specified and directed

Material & labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire all as specified and directed.

Fabrication and fixing of ceiling fan hook and clamp with nuts, bolts and washers and complete works requied at site for fixting of hook aal as specified and directed.

S & F Data & voice, telephone socket with transparant shutter 1 module (R) 11 scoket Jack) complete all as specified and directed. Make: Legrand cat No 6731 52 or equivalent Cat part in Seimens/GE.

S & F USB charger 1 module 1000mA (IS I3252( part-1) / IEC 60950-1) complete all as specified and directed. Make: Legrand cat No 6730 80 or equivalent Cat part in Seimens/GE.

Removing the existing window Air conditioner 1.5/2TR complete including all accessories and closing opening of wall with brick work in cement mortor 1:4 plastering, white washing/ destempering to match with surroundings and shifting of window type Air conditioner including accessorise, making suitable size opening in existing wall suitable fixing air conditiioner, fixting of wooden frane made out of not leethan 50 x 75 mm hard wood runners painting , funinshing in cement mortor in 1:4 white washing distempering to match with surroundings at suitable location all as specified & directed by ELC.

shifting of Split AC unit from exising position & refixing the new postion / location including additinoal sccerssories as required, testing & commissioning all as specifed and directed.

Supply and fixing copper tubings of appropriate dia for suction line and for liquid discharge line duly insulated with suitable insulation material including making hole in wall for passing though pipe and making good distrubed surface complete all as specified and as directed.

ROHIT CONSTRUCTION

ialandhara construction

Rohit Enterprises

Sri Tirupati Enterprises

RAJU ENTERPRISES

georson constructions