Interior Furnishing work for Fort Circuit House at Diu

Amount

Works

Chief Engineer Office Main TABLE MT : SIZE : 2100L X 900W X 750HT DESCRIPTION: Providing, supplying,Fixing, Testing and Commissioning Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support:End Legs: MS powder coated legs Modesty Panel: 18mm thk pre lam board with2mm PVC edge lipping of 450mm Ht Wire Management: 450mm Flip up with cable dump with vertical wire entry cover. Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Back Storage Providing, supplying,Fixing, Testing and Commissioning Size : 2800L x 450D x 750Ht back Storage Made up of 18mm thick Prelam particle board & Shutters Opreted on Auto Closing Hinges with Regular lock Make:- Featherlite/ Space Wood/ Approved by Architect and Engineer

Workstation with pedestal Providing, Supplying & Fixing Linear Workstation PERFORM size : 1050L X 600D X 1050HT Description:Providing, supplying,Fixing, Testing and Commissioning Table top: 25mm thick Pre-laminate particle board finished with 2mm PVC Edge Banding. Under Structure: Supported on MS Powder Coated PERFORM Legs and MS cross beams. Wire Management: 65 dia grommet hole. Main Screen : 12m Fabric On Stud Return Screen : 12mm FAbric On Stud. PLB Mobile Pedestal 2D+1F Sizes : 400L x 450 X 600Ht Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Providing, supplying,Fixing, Testing and Commissioning Workstation area Low Height Storage Providing, Supplying & Fixing Back storage Size : 1400L x 450D x 1200Ht back Storage Made up of 18mm thick Prelam particle board & Shutters Oprated on auto Closing Hinges with Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Providing, supplying,Fixing, Testing and Commissioning Workstation area Low Height Storage Providing, Supplying & Fixing Back storage Size : 1950L x 450D x 1200Ht back Storage Made up of 18mm thick Prelam particle board & Shutters Oprated on auto Closing Hinges with Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Reservation area Workstation with pedestal PERFORM size : 1800L X 600D X 1050HT Description:Providing, supplying,Fixing, Testing and Commissioning Table top: 25mm thick Pre-laminate particle board finished with 2mm PVC Edge Banding. Under Structure: Supported on MS Powder Coated PERFORM Legs and MS cross beams. Wire Management: 65 dia grommet hole. Main Screen : 12m Fabric On Stud Return Screen : 12mm FAbric On Stud. PLB Mobile Pedestal 2D+1F Sizes : 400L x 450 X 600Ht Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Reservation area Workstation with pedestal PERFORM size : 1350L X 600D X 1050HT Description:Providing, supplying,Fixing, Testing and Commissioning Table top: 25mm thick Pre-laminate particle board finished with 2mm PVC Edge Banding. Under Structure: Supported on MS Powder Coated PERFORM Legs and MS cross beams. Wire Management: 65 dia grommet hole. Main Screen : 12m Fabric On Stud Return Screen : 12mm FAbric On Stud. PLB Mobile Pedestal 2D+1F Sizes : 400L x 450 X 600Ht Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Reservation area Workstation with pedestal PERFORM size : 1200L X 600D X 1050HT Description:Providing, supplying,Fixing, Testing and Commissioning Table top: 25mm thick Pre-laminate particle board finished with 2mm PVC Edge Banding. Under Structure: Supported on MS Powder Coated PERFORM Legs and MS cross beams. Wire Management: 65 dia grommet hole. Main Screen : 12m Fabric On Stud Return Screen : 12mm FAbric On Stud. PLB Mobile Pedestal 2D+1F Sizes : 400L x 450 X 600Ht Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

CCTV Room area Workstation with pedestal PERFORM size : 1850L X 600D X 1050HT Description:Providing, supplying,Fixing, Testing and Commissioning Table top: 25mm thick Pre-laminate particle board finished with 2mm PVC Edge Banding. Under Structure: Supported on MS Powder Coated PERFORM Legs and MS cross beams. Wire Management: 65 dia grommet hole. Main Screen : 12m Fabric On Stud Return Screen : 12mm FAbric On Stud. PLB Mobile Pedestal 2D+1F Sizes : 400L x 450 X 600Ht Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

CCTV Room area Workstation with pedestal PERFORM size : 1450L X 600D X 1050HT Description:Providing, supplying,Fixing, Testing and Commissioning Table top: 25mm thick Pre-laminate particle board finished with 2mm PVC Edge Banding. Under Structure: Supported on MS Powder Coated PERFORM Legs and MS cross beams. Wire Management: 65 dia grommet hole. Main Screen : 12m Fabric On Stud Return Screen : 12mm FAbric On Stud. PLB Mobile Pedestal 2D+1F Sizes : 400L x 450 X 600Ht Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Providing, supplying,Fixing, Testing and Commissioning CCTV Room area Low Height Storage Providing, Supplying & Fixing Back storage Size : 900L x 450D x 1200Ht back Storage Made up of 18mm thick Prelam particle board & Shutters Oprated on auto Closing Hinges with Regular lock Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Reception table 2100x750 x1050 Providing, supplying,Fixing, Testing and Commissioning of Reception table unit consist main table with pedestal unit with all necessary accessories keyboard, CPU stand , cable manager, etc with all required necessary accessories. 1.Front panel top: Neolith/Veneer with Melamine polish/marble with ply structure finish. 2.Working Desk Top: 36 mm thk (18+18 ply )top made from 303 BWR ply with Veneer Melamine polish, Marble or Courian finish. 3. Table front: As per detail drawing and reference image made from ply with coloured glass/MDF/ Neolith with backlit and logo engarving work complete as per detail drawing 4. Verticle support: As per detail drawing and reference image made from 25 mm thick IS 710 BWR ply with Veneer Melamine polish, Marble or courian finish. 5.Wiremanagement : Rate inclusive of Providing, Fixing, Testing and Commissing As per approved and requirement of schocket and quantity Popup table top electrical WIRE MANAGEMENT BOX ss finish. The work shall be done as per the drawing ,specifications, sample approved and as directed by the Architect/ Client. The rate shall be for complete item inclusive of all material, labour, wastages , necessary tools & tackles, adhesives consumable hardware & required SS 304 grade hardware/accessories led light fixture/ strip light of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. The unit shall be manufactured in parts and these parts shall be assembled at site. Work complete as per specification, drawing approval and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Providing and fixing storage units of full/ low height of Size 3650 x 450 x 750 as per drwng. They shall consist of 18mm thk. 303 MR ply top, sides, bottom, shelves and shutters & 8mm thk 303 MR ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with box type higes of approved make & teak lipping finished with melamine polish with approved Veneer on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages. All the external surfaces including back shall be finished with Veneer with Melamine polish of approved make. 18mm thk. 303 MR Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with laminate including the shelves. Rate shall be inclusive of all necessary approved fittings like hinges, locks, 150mm long SS brushed finish handles,tower bolts, and any necessary ardware items.all complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Console at Waiting area size : 2400 x 450 x 750 Providing, Fixing, Testing and Commissing of as per detail drawing made from 19 mm IS 710 BWP ply structure and ineer side 1.0 mm thick laminate and outer side 4 mm thk veneer with melamine polsh finish shall be of approved make & shade and as per the detail drawing. All the edges of ply shall be covered with veneer and melamine polsh finish Rate shall also inclusive of all necessary brass satin finish nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm tower bolts, ball catches/Magnet, The rate shall be in sqm of elevation area for all floors and at all heights including all costs and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Helping Desk near reception area MT : SIZE : 1200L X 600W X 750HT DESCRIPTION: Providing, supplying,Fixing, Testing and Commissioning Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support:End Legs: MS powder coated legs Modesty Panel: 18mm thk pre lam board with2mm PVC edge lipping of 450mm Ht Wire Management: 450mm Flip up with cable dump with vertical wire entry cover. Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Cabin High Back Chair Providing, supplying,Fixing, Testing and Commissioning * High Back Mesh Chair * With Headrest * AC 60 Mesh * Fabric Upholstered Cushion Seat * Multilock Mechanism * Adjustable Lumbar Support * One Way Adjustable Arms (Height) * Nylon Base Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Visitor Chair and Staff Chair Providing, supplying,Fixing, Testing and Commissioning * Medium Back Mesh Chair * AC 60 Mesh * Fabric Upholstered Cushion Seat * Single Lock Synchro Mechanism * Adjustable Lumbar Support * One Way Adjustable Arms (Height) Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Manager Cabin 2 Seater Sofa 2100 x 800 x 750 Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Round Corner table 500 dia x 450ht Providing, supplying,Fixing, Testing and Commissioning of center table 36 mm thick (18+18 mm ply)comprising from 303 BWR ply & 4mm th veneer with Melamine polish finish and vertical support from teak wood with Melamine polish , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Reception waiting area 2 seater sofa 2400 x 1000 x 750 Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Reception waiting area Single seater sofa 900 x 900 x 750 Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Waiting area center table 1200 x 1000 x 450 Providing, supplying,Fixing, Testing and Commissioning of center table 36 mm thick (18+18 mm ply)comprising from 303 BWR ply & 4mm th veneer with Melamine polish finish and vertical support from teak wood with Melamine polish , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Round Corner table Waiting area 500 dia x 450ht Providing, supplying,Fixing, Testing and Commissioning of corner table 36 mm thick (18+18 mm ply)comprising from 303 BWR ply & 4mm th veneer with Melamine polish finish and vertical support from teak wood with Melamine polish , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Resturant Dining Square table 1000 x 1000 x 750 ht Providing, Fixing, Testing and Commissing of Square Dining table of 36 mm thick (18+18 mm ply )top made from 710 BWR ply with veneer finish and Melamine polish finish and vertical support made from teakwood with Melamine polish. including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and as directed and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Resturant Dining Rectangle table 1500 x 900 x 750 ht Providing, Fixing, Testing and Commissing of Rectangle Dining table of 36 mm thick (18+18 mm ply ) top made from 710 BWR ply with veneer finish and Melamine polish finish and vertical support made from teakwood with Melamine polish. including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and as directed and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Dining Two Seater Sofa 1500 x 600 x 750 Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Dining Three Seater Sofa Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Dining Chair for Resturant Area Providing, Fixing, Testing and Commissing of chair as per refrance image /approved by architect Padding material shall be high resiliency polyurethane foam, The back shall be 3/4” thick. The seat shall be 1‐1/2” thick.Seating fabric shall be approved by architect All upholstery shall be first quality without creases, stretch lines, or wrinkles. The frame shall be teaksolid wood. All wood shall be finished withMelamine finish The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, sample, loading, unloading, transportation, placing at all floors and all accessories etc. and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Conference Table - 5700 x 1500 x 750ht Specifications Providing, supplying,Fixing, Testing and Commissioning of Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated Perform legs Intermediate Legs: MS podwer coated legs and supporting MS cross beams Wire Management : Vertical wire entry cover for wire uptake from floor to cable tray and 450mm Aluminium Flip Up for swicth access. Make:- Featherlite/ Space Wood/ Monarch / Approved by Architect and Engineer

Conference Room Console size : 3600 x 450 x 750 Providing, Fixing, Testing and Commissing of as per detail drawing made from 19 mm IS 710 BWP ply structure and ineer side 1.0 mm thick laminate and outer side 4 mm thk veneer with melamine polsh finish shall be of approved make & shade and as per the detail drawing. All the edges of ply shall be covered with veneer and melamine polsh finish Rate shall also inclusive of all necessary brass satin finish nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm tower bolts, ball catches/Magnet, The rate shall be in sqm of elevation area for all floors and at all heights including all costs and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Café Lounge Table 1000 x 1000 x 750 ht Providing, Fixing, Testing and Commissing of Square Dining table of 36 mm thick (18+18 mm ply )top made from 710 BWR ply with veneer finish and Melamine polish finish and vertical support made from teakwood with Melamine polish. including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and as directed and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Café Lounge Round Table 1000 dia x 750 ht Providing, Fixing, Testing and Commissing of Round Dining table of 36 mm thick (18+18 mm ply ) top made from 710 BWR ply with veneer finish and Melamine polish finish and vertical support made from teakwood with Melamine polish. including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and as directed and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Café Lounge Chair Providing, Fixing, Testing and Commissing of chair as per refrance image /approved by architect Padding material shall be high resiliency polyurethane foam, The back shall be 3/4” thick. The seat shall be 1‐1/2” thick.Seating fabric shall be approved by architect All upholstery shall be first quality without creases, stretch lines, or wrinkles. The frame shall be teaksolid wood. All wood shall be finished withMelamine finish The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, sample, loading, unloading, transportation, placing at all floors and all accessories etc. and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Bar Stool at Café area Providing, Fixing, Testing and Commissing of Bar Stool at bar area. Vertical pole is S.S 316 with epoxy or polyester powder coating. Bar stool chair will in hydraullic pump operation of Std quality. Seat finish in Reinforced Polypropylene plastic or with soft foam and approved leatherite finish.Foot rest as per Std height with Polypropylene plastic cover.Base in SS 316, complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std ROOM - Bed with Headboard size :- 2055 x 2030 x 450 Providing, Fixing, Testing and Commissing of bed with under storage unit with necessary wooden frame work structure with 19 mm thick ply, top & vertical supports: 19 to 25 mm th. ply finish with veneer melamine polish and bottom finish with laminate. etc. work completed as per drawing & intraction of EIC. Finish : 4 mm thick Veneer finish with Melamine Polish. including all necessary tools, tackles, fittings, ,fixtures, etc work .complete as per the detailed drawing and instruction of Architect/EIC. The rates shall be inclusive of all wastages, material, labor, transportation, loading, unloading, fixing in position, etc. complete to the satisfaction of the Architect/EIC. The work shall be done as per the drawing , specifications, mockup sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std ROOM - Side Table size :- 600 x 400 x 500 Providing, Fixing, Testing and Commissing of bed side drawer unit with MR grade 12/19 ply with veneer melamine polish/corian finish and necessary hardware with locking arrangment. including all necessary tools, tackles, fittings, ,fixtures, etc work .complete as per the detailed drawing and instruction of Architect/EIC. The rates shall be inclusive of all wastages, material, labor, transportation, loading, unloading, fixing in position, etc. complete to the satisfaction of the Architect/EIC. The work shall be done as per the drawing , specifications, mockup sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std ROOM - Wardrobe with Luggage rack and Minibar size : 1200 x 500 x 2100 Providing, Fixing, Testing and Commissing of wardrobe as per drawing/Ref image. made up of 19mm thick BWR grade ply &finished of Veneer with melamine polish of approved make and shade. Rate shall be inclusive of providing, fixing all necessary brass satin finish nickel plated/ S.S 304 grade (hardware from Hettich like Auto Hinges, handle, Rod locks, Multipurpose lock, Telescopic channel S.s pipe oval Hettich (047 615) with ss socket ), tower bolts, ball catches/Magnet, hydraulic hinges etc Rate shall be inclusive of internal shelves of 19mm thick IS 710 BWR ply and outer side veneer and inner side laminate, with 4mm thick solid wooden beading on all around the shelve & 2 nos of drawer unit with veneer melamine polish and ineer side 1 mm th laminate finished complete as per the drawing. Shutter made made from SS finish olive or approved make frame and handle profile with 4 mm th toughened glass with opaque film All external & internal exposed woodwork to be finished in Melamine polish as per specified item's manufacturer's specifications..Rate shall inclusive of providing mock up sample for approval and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std Room - Dressing Mirror

Std Room - Tv Unit size :- 1800 x 300 x 900 Providing, Fixing, Testing and Commissing of TV Ledge 36 mm thick(18+18 mm ply) top Made from IS 710 BWR ply with veneer finish and melamine polish and vertical support made from ply with veneer and melamine polish finsh. including Drawer unit if required as per drawing . work complete all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std Room - Working Table size : 1200 x 500 x 750 Providing, Fixing, Testing and Commissing writing desk 36 mm thick (18+18 mm ply) top Made from IS 710 BWR ply with veneer finish and vertical support made from ply with veneer finsh. including Drawer unit if required as per drawing . work complete all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std Room - Two Seater Sofa 1800 x 675 x 750 ht Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std Room - Center Table 750 dia x 450ht Providing, supplying,Fixing, Testing and Commissioning of center table 36 mm thick (18+18 mm ply)comprising from 303 BWR ply & 4mm th veneer with Melamine polish finish and vertical support from teak wood with Melamine polish , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std Room - Balcony Chair Providing, Fixing, Testing and Commissing of chair as per refrance image /approved by architect Padding material shall be high resiliency polyurethane foam, The back shall be 3/4” thick. The seat shall be 1‐1/2” thick.Seating fabric shall be approved by architect All upholstery shall be first quality without creases, stretch lines, or wrinkles. The frame shall be teaksolid wood. All wood shall be finished withMelamine finish The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, sample, loading, unloading, transportation, placing at all floors and all accessories etc. and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Std Room - Balcony Center Table 750 dia x 450ht Providing, supplying,Fixing, Testing and Commissioning of center table 36 mm thick (18+18 mm ply)comprising from 303 BWR ply & 4mm th veneer with Melamine polish finish and vertical support from teak wood with Melamine polish , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite ROOM - Bed size :- 2055 x 2030 x 450 Providing, Fixing, Testing and Commissing of bed with under storage unit with necessary wooden frame work structure with 19 mm thick ply, top & vertical supports: 19 to 25 mm th. ply finish with veneer melamine polish and bottom finish with laminate. etc. work completed as per drawing & intraction of EIC. Finish : 4 mm thick Veneer finish with Melamine Polish. including all necessary tools, tackles, fittings, ,fixtures, etc work .complete as per the detailed drawing and instruction of Architect/EIC. The rates shall be inclusive of all wastages, material, labor, transportation, loading, unloading, fixing in position, etc. complete to the satisfaction of the Architect/EIC. The work shall be done as per the drawing , specifications, mockup sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite ROOM - Side Table size :- 600 x 400 x 500 Providing, Fixing, Testing and Commissing of bed side drawer unit with MR grade 12/19 ply with veneer melamine polish/corian finish and necessary hardware with locking arrangment. including all necessary tools, tackles, fittings, ,fixtures, etc work .complete as per the detailed drawing and instruction of Architect/EIC. The rates shall be inclusive of all wastages, material, labor, transportation, loading, unloading, fixing in position, etc. complete to the satisfaction of the Architect/EIC. The work shall be done as per the drawing , specifications, mockup sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Two Seater Sofa 1500 x 750 x 750 ht Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Center Table 700 dia x 450ht Providing, supplying,Fixing, Testing and Commissioning of center table 36 mm thick (18+18 mm ply)comprising from 303 BWR ply & 4mm th veneer with Melamine polish finish and vertical support from teak wood with Melamine polish , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Tv Unit size :- 1800 x 300 x 900 Providing, Fixing, Testing and Commissing of TV Ledge 36 mm thick(18+18 mm ply) top Made from IS 710 BWR ply with veneer finish and melamine polish and vertical support made from ply with veneer and melamine polish finsh. including Drawer unit if required as per drawing . work complete all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite ROOM - Wardrobe size : 1800 x 600 x 2100 Providing, Fixing, Testing and Commissing of wardrobe as per drawing/Ref image. made up of 19mm thick BWR grade ply &finished of Veneer with melamine polish of approved make and shade. Rate shall be inclusive of providing, fixing all necessary brass satin finish nickel plated/ S.S 304 grade (hardware from Hettich like Auto Hinges, handle, Rod locks, Multipurpose lock, Telescopic channel S.s pipe oval Hettich (047 615) with ss socket ), tower bolts, ball catches/Magnet, hydraulic hinges etc Rate shall be inclusive of internal shelves of 19mm thick IS 710 BWR ply and outer side veneer and inner side laminate, with 4mm thick solid wooden beading on all around the shelve & 2 nos of drawer unit with veneer melamine polish and ineer side 1 mm th laminate finished complete as per the drawing. Shutter made made from SS finish olive or approved make frame and handle profile with 4 mm th toughened glass with opaque film All external & internal exposed woodwork to be finished in Melamine polish as per specified item's manufacturer's specifications..Rate shall inclusive of providing mock up sample for approval and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Luggage Rack size : 1000 x 500 x 600 Providing, Fixing, Testing and Commissing on site in required position 36 mm thick(18+18 mm ply) top with wooden framing and finish with Veneer with Melamine polish as per suggested by Architect complete. The work including 4 mm thick ss strip , all necessary frame work and fittings accessories,and lighting arrangment work complete as per the detailed drawing and approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Living Room - Console : 1500 x 450 x 900 Providing, Fixing, Testing and Commissing of as per detail drawing made from 19 mm IS 710 BWP ply structure and ineer side 1.0 mm thick laminate and outer side 4 mm thk veneer with melamine polsh finish shall be of approved make & shade and as per the detail drawing. All the edges of ply shall be covered with veneer and melamine polsh finish Rate shall also inclusive of all necessary brass satin finish nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm tower bolts, ball catches/Magnet, The rate shall be in sqm of elevation area for all floors and at all heights including all costs and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Living Room - Dining Table size:1000 dia x 750 Providing, Fixing, Testing and Commissing of Dining Table top : 16/19 mm thick Marble / Courian /Ply with veneer and Melamine polish finish as per approved sample by Architect. All edges shall be finish as per drawing & instruction of Architect. Base structure: SS 16 gauge grade section 40x40mm verticle,40 x20 and 6 mm th SS flat bar horizontal support as per detailed drawing and reference image complete with approved floor leveler system accessories tool tackle etc. Work complete including all type of material, fittings , fixtures,Finish, loading , unloading , transporation, all leads ,accessories, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Living Room - Dining Chairs Providing, Fixing, Testing and Commissing of chair as per refrance image /approved by architect Padding material shall be high resiliency polyurethane foam, The back shall be 3/4” thick. The seat shall be 1‐1/2” thick.Seating fabric shall be approved by architect All upholstery shall be first quality without creases, stretch lines, or wrinkles. The frame shall be teaksolid wood. All wood shall be finished with Melamine polish finish The work shall be done as per the approved shop drawing (to be prepared by contractor),specifications, sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, sample, loading, unloading, transportation, placing at all floors and all accessories etc.approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Living Room - Working table size : 1500 x 750 x 750 Providing, Fixing, Testing and Commissing writing desk 36 mm (18 + 18 mm ply )thick top Made from IS 710 BWR ply with veneer finish and vertical support made from ply with veneer with melamine polish finsh. including Drawer unit if required as per drawing . work complete all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Living Room - Tv Unit size: 1800 x 300 x 900 Providing, Fixing, Testing and Commissing of TV Ledge 36 mm thick(18+18 mm ply) top Made from IS 710 BWR ply with veneer finish and melamine polish and vertical support made from ply with veneer and melamine polish finsh. including Drawer unit if required as per drawing . work complete all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Living Room - Two Seater sofa 2100 x 800 x 750ht Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Living Room - Single Seater sofa 900 x 900 x 750 ht Providing, supplying,Fixing, Testing and Commissioning of sofa made up of Solid teak wood frame Melamine polish. The seat shall 150 mm th 40 density thikness & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in Melamine polish .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer‐in‐charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Living Room - Centre Table 1050 x 600 x 450 ht Providing, supplying,Fixing, Testing and Commissioning of center table 36 mm thick (18+18 mm ply)comprising from 303 BWR ply & 4mm th veneer with Melamine polish finish and vertical support from teak wood with Melamine polish , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Living Room - Corner Table 500 x 500 x 450 ht Providing, supplying,Fixing, Testing and Commissioning of center table 36 mm thick (18+18 mm ply)comprising from 303 BWR ply & 4mm th veneer with Melamine polish finish and vertical support from teak wood with Melamine polish , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Living Room - Working Table Chair Providing, Fixing, Testing and Commissing of Loose Chair with Teakwood Frame with Melamine polish and Moulded PU Foam, The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's designintent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, all taxes, transportation, placing at all floors and for all leads,all accessories as described in item description & mockup sample approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Balcony Chair Providing, Fixing, Testing and Commissing of chair as per refrance image /approved by architect Padding material shall be high resiliency polyurethane foam, The back shall be 3/4” thick. The seat shall be 1‐1/2” thick.Seating fabric shall be approved by architect All upholstery shall be first quality without creases, stretch lines, or wrinkles. The frame shall be teaksolid wood. All wood shall be finished withMelamine finish The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, sample, loading, unloading, transportation, placing at all floors and all accessories etc. and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Suite Room - Balcony Round Table 600mm Dia. X 550mm Ht. Providing and making of Round table made of solid wood with Veneer finished in approved with 10mm thk. Clear Glass top. Complete as per design and drawing including necessary Hardware, etc.

Suite Room -Dressing Table with Full Ht. Dressing Mirror Providing and fixing in place Dressing Table with full ht. Dressing Mirror made out of 25mm metal frame profile with apporved powder coating finish with extra clear Mirror with ply backing including necessary hardware, fitting etc. complete as per design and drawing as directed by PMC

Suite Room -Puffy Providing & Fixing of Puffy as per detailed Drawings. (Basic Rate of fabric is Rs 500 Per Meter) Outside: Approved Shade Fabric Finish

Male and Female 4 door Locker Providing, Fixing, Testing and Commissing of lockers are made up of CRCA having 4 compartments in every tower. The size of the tower is 300 (W) X 450 (D) X 1830 (H). The tower is equally divided into 4 compartmets. Each compartment has an indivial locking mechanism pre‐fitted to it. The top of the Tower is made up of 2mm thick CRCA duly powder coated to aproved finish. The caracass and shelf are made up of 0.8mm CRCA Duly Powder Coated. The skirting is made up of 1.2mm CRCA duly powder coated to the approved finish. The powder coating is of 50‐60 microns. All CRCA material confirm to IS 513 CR2 2008.Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, all taxes, transportation, placing at all floors and for all leads,all accessories as described in item description. complete in all respect to the entire satisfaction of the Architect and engineer incharge.

19 mm thk ply panelling with 4 mm mdf and moulding patti Providing, Fixing, Testing and Commissing as per detail drawing and reference image Panelling made from 19 mm ply panel with 4 mm MDF With wall paper or Duco or PU paint finish and copper patti inlay if required to fixed in groove as per design .The work shall be done as per the specifications, sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labor, wastages, necessary tools & tackles, adhesives, consumable hardware, fabrication & required SS 304 grade hardware/accessories of approved make. etc. including sacffloding and staging complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

19 mm thk ply panelling with 4 mm mdf and Teakwood moulding patti Wall panelling Providing, Fixing, Testing and Commissing as per detail drawing and reference image Panelling made from 19 mm ply panel with 4 mm MDF With wall paper or Duco or PU paint finish and copper patti inlay if required to fixed in groove as per design .The work shall be done as per the specifications, sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labor, wastages, necessary tools & tackles, adhesives, consumable hardware, fabrication & required SS 304 grade hardware/accessories of approved make. etc. including sacffloding and staging complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

19 mm ply panelling and 4 mm mdf with Fabric Finish Wall panelling Providing, Fixing, Testing and Commissing as per detail drawing and reference image Panelling made from 19 mm ply panel with 4 mm MDF With Fabric finish and copper patti inlay if required to fixed in groove as per design .The work shall be done as per the specifications, sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labor, wastages, necessary tools & tackles, adhesives, consumable hardware, fabrication & required SS 304 grade hardware/accessories of approved make. etc. including sacffloding and staging complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

12 mm ply panelling with veneer finish and polish Veneer Panelling : Providing, Fixing, Testing and Commissing of 12mm thick IS 710 ply fixed on 50mm thick frame work. The framework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c horizontally. The frame work shall be made from Aluminium section (50x50x3 L angle or as per drawing) make JINDAL/HINDALCO conforming to IS specification In paneling, (intermediate, perimeter ) & (at vertical or horizontal joint of ply & at turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro‐shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated with anti‐termite treatment & hidden The framework shall be covered with approved make plywood(IS 710‐ 12 mm ply),adhesive ,tape, headless nails etc ,finished with Veneer ( veneer base 4 mm thick Gurjan ply) with Melamine polish & in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as directed by EIC/ Architect. The rate shall be in Sq.mt of actual paneling work for all floors, at all heights, all shapes .Rate shall inclusive of all material ,labor scaffolding, tools, tackles, for all heights and for all levels, Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights /air‐conditioners ,grills, diffusers etc & providing additional sections for strengthening around the openings/cutouts, making grooves between wall & board or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. Only plan area shall be considered for payment. All curved surfaces, recesses, waffles and corbellings shall be part of the false ceiling & actual area laid shall be measured for payment.panelling item including openable shutter wherever required area and finish with the same material. Only the clear elevation area shall be measured and paid.complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Curtain Palmet- "L" shape in veneer and polish finish Providing, Fixing, Testing and Commissing wooden pelmets of upto 200 mm x 150 to 300 mm L shape made of 19mm thick ply as per IS 710 and beading of 4mm thick and 25mm wide Ghana Teak wood for projection screen. Palmet cover with veneer with polish and Rate to be inclusive of lipping, cutting, wastages, necessary fixtures, nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per drawing and approved sample etc should also take load of all the all roller blinds.complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Jamb line of 38 mm thk with 19+19 mm ply panelling with veneer finish and polish Providing, Fixing, Testing and Commissining of Jamb line panelling with 19 mm double ply of 303 MR witj termite free. Jamb line has to fixed as per design and detail drawing with complete instruction. Jamb line finish with 4 mm thk veneer and Melamine polish, all complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Duct Door with panelling - Corridor Providing, Fixing, Testing and Commissing ISI marked door shutters from 25mm thk blockboard conforming to IS : 2202 (Part I) non-decorative type,shutter has to framed with bedding patti of 25mm x 12 thk with 19mm thk double ply frame of 1st class with all complete necessary hardware as per detail dwg and on outer faces of shutters in veneer finish with melamine polish Asian paint Melamine gold or timber tone Melamine of ICI Dulex or Wudfin of Pidilite industries or Duco or PU polish as per design limited of approved shade and inner face with 1mm thk approved laminate,.approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

12 mm thk toughened fixed glass partition for admin area Providing, Fixing, Testing and Commissing in position 12mm clear float toughened Glass for naked glass partition and door. The work to include making necessary template for all the glasses and then cutting the clear float glass to correct size, making all the necessary holes, cuts etc., and then toughening the same. The cost to include all hardware required viz., Dorma or approved equivalent make floor spring with its accessories, top pivot, center lock, etc., along with 3M privacy film to be pasted as per design and drawing. The approximate size of each glass will be 1000mm to 1200mm x 2400mm to 2700mm as per site conditions, with patch fitting. The rate is for a finished item of work etc.,complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Fixed glass with spider fitting Providing, Fixing, Testing and Commissing of frameless Fixed Glass with 12mm thick toughened glass using PT Standard fittings like Spider fitting mechanism PT90/PT92 of DORMA/Ozone OPF series make for glass fixed towall,ceiling and with glass ,Glass is fixed at the bottom with U-Shaped Aluminium rails and EPDM gaskets including cutting, making holes in glass and fixing the fittings in floors, false ceiling etc. glass edge sand joints filled with transperent glasss ealing sealent wherever required with complete as per specifications and direction of Architect and Engineer-In-Charge.

Automatic sliding sensor door at Entrance Design, supply, Installation , testing and Commissioning of Framed Automatic Sliding door system and fixed glass above sliding door at double height of approved make of Hifab or Dorma or approved equivalent, with bi-part configuration, consisting of two door leaves sliding in opposite directions and clear opening in the centre of the door, complete with 12 mm thick clear tempered glass of approved make with aluminium frame as per design. Motor shall be of Short-circuit-proof power pack 230V AC, shall have Automatic overload protection & Auto reset facility, Protection against Power surges, complete as per specifications and direction of Architect and Engineer-In-Charge.

12 mm thk toughened fixed Shower glass and door with all necessary hardware Providing, Fixing, Testing and Commissing jaquar or Dorma or equivalent make shower cubile with 10mm thk toughened clear glass with anti lime scale treated glass and The cost to include all necessary hardware like wall to wall stablizer, Magnetic beeading and Air Gasket, 2 Nos Wall Brackets CHROM ,2 Nos Floor Brackets CHROM approved and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Sun Screen Blinds Providing, Fixing, Testing and Commissing blinds as per approved make as per suggested shade & spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head rail,components, bottom bar. Fabric : screen classic 5% Fabric value : 465 gsm , Thickness : 0.65 mm Fabric to be as per approved sample. All the work complete as per the detailed drawing , mockup sample and instruction of Architect/EIC.All complete as per approval of designer. The mode of Measurement: The size of the blind will be measured from end to end bracket (Left to Right bracket) height will be measured from top of the pelmet to sill bottom level and clear opening size only there will be not extra payment towered overlapping.& mockup sample approved by the Architect/ EIC.

12 mm ply panelling with Bronze Mirror Providing, Fixing, Testing and Commissing 6 mm thick Bronze mirror of Saint Gobain or other approved make shall be fixed with 12 mm ply panelling finish. Provision shall be made for concealled light work as per detailed drawing / instruction of architect complete. Rate shall be inclusive of glass shelf with necessary accessories and wooden support as per rquirement . work complete as per the drawing and instrcution of Architect/EIC. Rate shall be inclusive of mirror frosting work. complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

12 mm ply panelling with 5mm thk Mirror Providing, Fixing, Testing and Commissing 6 mm thick mirror of Saint Gobain or other approved make shall be fixed with ply panelling with veneer finish. Provision shall be made for conceallled light work as per detailed drawing / instruction of architect complete. Rate shall be inclusive of glass shelf with necessary accessories and wooden support as per rquirement . work complete as per the drawing and instrcution of Architect/EIC. Rate shall be inclusive of mirror frosting work complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Wall Paper Providing, Fixing, Testing and Commissing vinyl or Polyster Textile wallpaper coverings with approved adhesive on existing plastered surface finished with putty , to give bubble free uniform surface. Any unevenness of the base surface shall be removed before fixing the wallcovering, all complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Providing, Fixing, Testing and Commissing of 3M Etching LUMAR FILM including Plotter cutting. (Scotchcal™ ElectroCut™ Graphic Film Series 7725SE-400, Fluorescent Film) . Complete as per entire satisfaction of Architect and engineer-in-charge.

Providing, Fixing, Testing and Commissing of 3M Controltac opaque printable vinyl with advance repositionability and Comply adhesive for bubble free application as per design approved and Complete as per entire satisfaction of Architect and engineer-in-charge.

Carpet modular Providing & fixing of Interface hopitality series modular carpet of Tufted textured Loop with BCF Nylon type 6 of Universal manufacture with Solution dyed,Soil protection,Machine gauge Tapestry, Stitches of 12th Gauge and Pile thickness 3.0mm +/- 0.5mm with total thickness : 7.5mm +/- 0.5mm and size of 1 mtr x 1mtr with Backing Structure of Glasbac / Cushion Back. The unit rate shall be inclusive of labour, Scaffolding, material etc. & excluding taxes. No Wastage shall be considered for measurement. all complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Engineering wooden flooring Providing, Fixing, Testing and Commissing of pergo or equivalent 14mm Engineered wooden flooring of KINGDOM Wood Oak…... of size 1860 x 190 x 14.5mm mm having 3 mm top layer having construction of wood species as top layer, pine in the middle & north pine wood as the last layer Hence having a three-layer construction of Engineered wood Flooring. Floor boards shall be laid on 1mm PVC Film and 1mm Foam.Cost is including of skirting and bedding profile at door, all complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Wood Ceiling Providing, Fixing, Testing and Commissing IS 710 12 mm thick plywood false ceiling as per drawing & instruction of EIC/architect& sample approved (complete with frame work). finish with pre veneeredMDF board and veneer with melamine polish finish. Plywood shall be fixed with required fabrication work and ply frame work with all necessary acessories Rate shall include cost of making of all cutouts for light fixtures, gadgets, gizmo,pelmets, grooves, beads and also provide support/template where ever required The rate shall be in sq.mt for all floors and at all heights including all costs the sample mock of 5 Sqm minimum of the frame work and ceiling) shall be approved from client/architect.5mm Groove shall be provided at the junction of the false ceiling & the wall. The rate shall be in sqm for all floors and at all heights ,Offsets whether hollow or solid in the ceilings including all costs. etc. completed as per as per drawing & instruction of Architect and Engineer Incharge.

Trap Doors Providing, Fixing, Testing and Commissing Trap door in the false ceiling for HVAC unit in 19mm thick marine plywood finished in approved veneer on the outer finish exposed side of shutter in approved shade veneer and inner surface in balancing laminate, inclusive of of Heavy duty Aluminium Box Sections of 50mmx25mm @ 600mm c/c Both ways horizontally and vertically on the column/wall suspended from the true ceiling. All the edges to be of teak wood lipping and finished in approved melamine polish. The rate to be inclusive of necessary hardware etc. including sacffloding and staging complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Shera board ceiling Providing, Fixing, Testing and Commissing 12 mm thk Shera board false ceiling for Porch area inclusive of Heavy duty Aluminium Box Sections of 50mmx25mm @ 600mm c/c Both ways horizontally and vertically on the column/wall suspended from the true ceiling. The rate to be inclusive of necessary hardware etc. including sacffloding and staging complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

WOODEN PATTI 3" X 1 1/2" FALSE CEILING AFTER CERA BOARD CEILING Providing, Fixing, Testing and Commissing teak wood patti of size 75mm x 38 mm thk on Shera board false ceiling for Porch area . The rate to be inclusive of necessary hardware etc. including sacffloding and staging complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

STRETCH CEILING Providing, Fixing, Testing and Commissing White translucent fabric with led aluminium base bar led light of osaram led lens 24 watt system with installation including sacffloding and staging complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

SUPERSILL CEILING Providing, Fixing, Testing and commissing of Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063. The baffle blade shall be in size of 100x50x3600mm in powder coated to Woodgrain finish – Red Oak & Cherry. The baffle blade shall be suspended using Slotted U-profile of 20 x 30mm at on-center spacing 100mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fInstallation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter.ixed with End caps. Installation of Baffles: Locate the slot for Baffle Hangers in U Profile section at 1200mm centres. Hangers are inserted into the slot, and then inserted in the provision in the Al baffle. Two baffle hangers are required one on each side of the U-profile to hold the Al baffle in its place. Each Hanger to be secured into position by inserting the Locking Clip. When doing continuous installation, Baffles blades are to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner isscrew fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into open Baffle slots. Installation to be carried out by Trained Installation team & Installation should be carried out as per recommended procedure.

Providing, Fixing, Testing and Commissing of RFIAD door lock system Providing, Fixing, Testing and Commissing of RFID system of dio frequency identification device stand alone electronic wireless acess control lockset having stainless steel escutcheon, 3point stainless steel latch construction with anti friction mechanism panic release function deadbolt and latch automatically retcted by inside handle for easy egress in emergency situation high security mortise lockcase powered by 4AA batteries that provide up to 1 year normal usage . Cost includes with software, USB card Encoder, read the auidt trail information from the locking devices etc with complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Providing, Fixing, Testing and Commissing of Outdoor Furniture Bar table with 10 mm thk toughened glass top. Framing with powder coated Aluminium, Woven with Synthetic Wicker,complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Providing, Fixing, Testing and Commissing of Outdoor Furniture - Bar Chairs with cushion. Framing with powder coated Aluminium, Woven with Synthetic Wicker. Cushions made up of polyster fabric and high density foam. The cushion should removable fabric cover which can be washed when required,complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Bar Lounge - Bar counter size : 3100 x 600 x 1050 Providing, Fixing, Testing and Commissing of Bar Counter unit consist main table with Storage unit with all required necessary accessories. 1.Front panel top: Neolith/Veneer/marble with ply structure finish. 2.Top: 35 mm th top made from 303 BWR ply with Veneer, Courian finish or Marble. 3. Table front: As per detail drawing and reference image made from ply with coloured glass/MDF/ Neolith with backlit and logo engarving work complete as per detail drawing 4. Verticle support: As per detail drawing and reference image made from 25 mm thick IS 710 BWR ply with Veneer with Melamine polish, courian finish or marble finish 5.Wiremanagement : Rate inclusive of Providing, Fixing, Testing and Commissing As per approved and requirement of schocket and quantity Popup table top electrical WIRE MANAGEMENT BOX ss finish. The work shall be done as per the drawing ,specifications, sample approved and as directed by the Architect/ Client. The rate shall be for complete item inclusive of all material, labour, wastages , necessary tools & tackles, adhesives consumable hardware & required SS 304 grade hardware/accessories led light fixture/ strip light of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. The unit shall be manufactured in parts and these parts shall be assembled at site. Work complete as per specification, drawing approval and complete in all respect to the entire satisfaction of the Architect and engineer incharge.

Providing and fixing storage units of full/ low height as per drwng. They shall consist of 18mm thk. 303 MR ply top, sides, bottom, shelves and shutters & 8mm thk 303 MR ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with box type higes of approved make & teak lipping finished with melamine polish with approved Veneer on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages. All the external surfaces including back shall be finished with Veneer with Melamine polish of approved make. 18mm thk. 303 MR Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with laminate including the shelves. Rate shall be inclusive of all necessary approved fittings like hinges, locks, 150mm long SS brushed finish handles,tower bolts, and any necessary hardware items.all complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

316 SS Railing with 12 mm thk toughened glass Providing, Fixing, Testing and Commissing glass stainless steel ( Grade 316) railing made of Hollow tubes, channels, plates and 12 mm toughened glass etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.

Wooden Railing for Stair case Providing & Fixing of WOODEN RAILING WITH Round type Metal member, 300x 300mm coloumn cleading with wood , Wall side 2'.6" height wooden paneling with molding Inlcuding Tappa with Rizer 3'x10" as per detail drawings. Wood : Teak wood Vertical Member : Metal Finish with Powdercoating Finish : PU Finish

Signages : Providing, Fixing, Testing and Commissing of signages made form ss plate size upto 450 length and upto 100 mm ht as per instruction of Archiect/EIC.Contractor shall submit mock up sample.

Paints Providing, Applying, Testing and commissing of Wall painting three coats with Royal touch paint ( Anti bacterial Paint )of Asian Paint or equivalent approved make list or approved by architect and engineer in any shades and colour as directed on wall surface to give an even shade including applying two coats of Acrylic co‐polymer Stucco putty of Brila or equivalent on a one coat of PVA prmer/Decoprime or equivalent and three coats of paint, scaffolding to at any height with all labour and material thoroughly brushing the surface free from morta droppings and other foreign matter and sand prepared smooth etc. complete. Top coat should have. The substrate must be sound, clean, dry, free from dust, oil, grease and laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be removed by stiff bristle brushing. The primer / paint application is to be done with the rollers. rate shall be including crack filling and levelling as per manufacturers specfication complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Providing, Fixing, Testing and Commissing of 43" Samsung Hospitality UHD, 4K TV HG43AU800

Providing, Fixing, Testing and Commissing of Mini Freezer / fridge minibar absorbtion model:rb41 solid door, cfc free r600a refrigent,low energy consumption &noise,designed to perform at 35degree,capacity: 40lts simple door design,classic & eternal temperature 2-10*c dimension:16x18x22

Providing, Fixing, Testing and Commissing of YALE SAFE LOCKER- YSS 200 DB2 - Exterior Dimension :200x310x200mm,Net Weight :5.5kg, Interior Dimensins:190x 300 x 150mm

Providing, Fixing, Testing and Commissing of Electric Kettle : 1.0 ltr. capacity, ss304 body, auto cut-off, with on-indicator.

Providing, Fixing, Testing and Commissing acrylic kettle tray set : 3-pc set, white/black, big tray with sachet holder+service tray.

Providing, Fixing, Testing and Commissing of Room phone : bittel single line operation, 0~10 speed dial service keys, new qimei abs housing, anti-abrasion, fade-proof; hold/vol/flash/redial/speaker.

Providing, Fixing, Testing and Commissing of Bath-room phone : mechanical hook switch & ring indicator, two-step injection moulded keys, desk top and wall mountable

Providing, Fixing, Testing and Commissing of Iron board: hotel standard, fr (fire retard) silver color top fabric, foldable & adjustable height, industrial grade ms powder coated frame, powder coated black color

Providing, Fixing, Testing and Commissing of Philips iron : with steam or with steam & water spray or dry iron.

Providing, Fixing, Testing and Commissing of Weighing scale : transparent & black base, 150 kgs max., digital lcd display.

Providing, Fixing, Testing and Commissing of Melamine water glass tray: for in-room & wash-room, black color.

Providing, Fixing, Testing and Commissing of coffee mugs : ceramic, superior quality, high gloss finish, color: black/dk.blue color

Providing, Fixing, Testing and Commissing of gargle glass (for wash-room)

Providing, Fixing, Testing and Commissing of leatherite tissue dispenser

Providing, Fixing, Testing and Commissing of perforated open bin : ss201, size: 7 x 10

Providing, Fixing, Testing and Commissing of wooden regular hanger

Providing, Fixing, Testing and Commissing of soft shoes : non-woven, anti-slip, indian size, with binding, logo print w/moq.

Providing, Fixing, Testing and Commissing of ash tray : ss201, with & without lid

Providing, Fixing, Testing and Commissing of shaving mirror : wall mounted, 8”, 3x+1x, all brass except ss base.

Providing, Fixing, Testing and Commissing of classic model, double container, 350 ml capacity.

Providing, Fixing, Testing and Commissing of philips hair dryer foldable, stand-alone, on-call.

Providing, Fixing, Testing and Commissing of toilet tissue roll holder: brand: dazzle, ss304 grade, non- rustable.

Providing, Fixing, Testing and Commissing of towel rack : brand: dazzle, ss304 grade, non- rustable, available in 24”.

Providing, Fixing, Testing and Commissing of clothes hook : brand: dazzle, ss304 grade, non- rustable.

Providing, Fixing, Testing and Commissing of anti-slip mat : varioius color and size options available.

Providing, Fixing, Testing and Commissing of Mattress - Duroflex - 71" W X 79"L approx final size should be taken after bed install FR Grade Pocket Spring 8"

Providing, Fixing, Testing and Commissing of Mattress Protector - 71" W X 79"L approx final size should be taken after bed install Terry With TPU, 100% Water Proof

Providing, Fixing, Testing and Commissing of Bed sheet - 108" W x 111"L approx final size should be taken after bed install 300 TC Plain Percale, Optic white, Processed for xtra life

Providing, Fixing, Testing and Commissing of Duvet - 100" W x 100" L approx final size should be taken after bed install 300 GSM Micro Fibre

Providing, Fixing, Testing and Commissing of Duvet Cover Double- 102" W x 102" L 300 TC Plain Percale, Optic white, Processed for xtra life

Providing, Fixing, Testing and Commissing of Pillow Hard - 17" x 27" Conjucated Hollow Siliconized Fibre

Providing, Fixing, Testing and Commissing of Pillow Soft - 19" x 29" Micro Fibre

Providing, Fixing, Testing and Commissing of Pillow Protector - 17" x 27" Quited With Zip

Providing, Fixing, Testing and Commissing of Pillow Protector - 19" x 29" Quited With Zip

Providing, Fixing, Testing and Commissing of Pillow Cover - 18" x 28" 300 TC Plain Percale, Optic white, Processed for xtra life, Border type

Providing, Fixing, Testing and Commissing of Pillow Cover - 20" x 30" 300 TC Plain Percale, Optic white, Processed for xtra life, Border type

Providing, Fixing, Testing and Commissing of Bath Towel - 30" x 60" 650 GMS Plain Autoloom, 100% Cotton, 2 Ply R/S

Providing, Fixing, Testing and Commissing of Hand Towel - 16" x 27" 150 GMS Plain Autoloom, 100% Cotton, 2 ply R/S

Providing, Fixing, Testing and Commissing of Face Towel - 12" x 12" 50 GMS Plain Autoloom

Providing, Fixing, Testing and Commissing of Napkin - 18" x 21" White - Satin Band

Providing, Fixing, Testing and Commissing of Floor Matt - 20" x 30" 300 GMS Box Border, 100% Cotton

Providing, Fixing, Testing and Commissing of Cushion - 16" x 16" HSD

Providing, Fixing, Testing and Commissing of Cushion Cover - 16" x 16" Colour - Jacquard

Providing, Fixing, Testing and Commissing of Bed Runner - 17" x 95" Colour - Jacquard

Providing, Fixing, Testing and Commissing of Pool Towel - 36" x 72" 750 GMS Blue & White

Providing, Fixing, Testing and Commissing of Bath Robe - XL Waffle

Providing, Fixing, Testing and Commissing of Fine Art Canvas Frame - Bed 2 ( 70 Cm x 70 Cm )

Providing, Fixing, Testing and Commissing of Room Carpet - 96" x 48"

Bahusmarna construction Pvt.Ltd.