Construction of Community sanitary complex near community Hall at Karipora Budgam

Supply and laying of quarry stone soiling duly hand packed incl c/o all carriages compl job

Providing and laying in position cement concrete of specified grade including curing but 1;4;8 excluding the cost of centring and shuttering. All work upto plinth

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1:4

12 mm thick cement plaster in 1:4 mix

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 Size of tile 600x600m m bath room /room 4x1.5x1.5+3.6x0.6

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:

19.1.2.1 1216 (16mm OD) pipe

19.1.2.2 1620 (20mm OD) pipe

19.1.2.3 2025 (25mm OD) pipe

19.1.2.4 2532 (32mm OD) pip

Providing and fixing PPR Unions 19.2A.2 PPR Union 25mm

P/F PVC Pipe and fittings of Prince or other approved brand (type-B) incl cost of labour charges for cutting of wall/floor incl laying in proper gradient and fixing in position complete job

75 mm dia pipe

Floor trap 75 mm

Tee Door bend 75 mm

Plain bend 75 mm

coller 75mm

100 mm dia pipe

Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. 22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 0.65x1.9x4

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge incl all complete Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) 5.8x4+2.4x4+4x1.8 =40rm @ 1.5kg/rm

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) 22.3.1 With floating glass panes of 4.0 mm 0.45x.45x4+0.6x0.6x2

carriage of materilas by MT

Stone agg lead of 10 km

sand lead of 20 km

bricks lead of 5 km