MISC REPAIR/REPLACEMENT OF FLOORING, TILING, STONE CLADDING, GRANITE WORK, JOINERY, PLUMBING WORK, ROOF TREATMENT, GRIT WASH, DRAINS, SECURITY WALL PAVINGS ETC AND OTHER ALLIED WORKS AT VARIOUS LABS AND MES OFFICE AREA UNDER GE I RnD DELHI

Amount

Restraining rescecuring including making good staples etc Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed.

S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

S&F in repairs concertina coil fencing with punched tape, 600mm dia, having 50 Nos rounds per 6m length, including binding wire complete all as specified and directed.

S&F in repairs concertina coil fencing with punched tape, 450mm dia, having 50 Nos rounds per 6m length, including binding wire complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed.

Dismantling structural steel work including doors, gates, angle post, but excluding framed truss etc complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

S&F mild steel work conforming to Fe-410 (Gde E-250), Grade 'A' joist channels, angle or tee section, fixed independently without connecting plate including necessary cutting, drilling etc complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exceeding 6m mean radius in CM 1:4 brick including manhole raising, footpath, etc complete all as specified and directed.

All as per item Ser No 10.00 above but except brick.

Dismantling stone slabs/tiles of any description or thickness in floors, aprons laid dry complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) 25 mm thick as in floors etc finishing even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-0 (12.5mm graded aggregate) as in plinth courses, copings, parapets, saucers drain, kneelers, apex stones, bed blocks, kerbs, water troughs including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Renewing cement concrete tiles in patches, area not exceeding 5 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.

S&F factory made coloured cement concrete interlocking paver block with grey cement and pigment, any shape and size, 60mm thickness, M-35 grade complete all as specified and directed.

All as per item Ser No 19.00 above but except paver blocks.

M&L for providing precast cover slab in PCC 1:2:4 type B1 (using 20mm graded stone aggregate) for drains complete all as specified and directed.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry in floors using grey cement and pigment, over 20mm thick screed bed CM 1:6 complete all as specified and directed.

Taking down cement plaster, pointing, on brick or stone/concrete walls, drain surfaces etc including raking out joints, hacking for key, scrubbing down with water etc in any position complete all as specified and directed.

M&L rendering 15 mm thick plaster in CM 1:6 on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coats of acrylic emulsion paint over a coat of acrylic primer complete all as specified and directed.

M&L for Preparation of newly plastered wall surface and applying two coats of cement base paint complete all as specified and directed.

M&L providing PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in coping complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (20mm graded stone aggregate) for slabs supports on walls complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for columns hooking ends binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified and directed.

Use & waste of form work to edges of concrete flats etc exceeding 10 cm but not exceeding 20 cm wide for fair finished surface of concrete complete all as specified and directed.

M&L for preparation of new concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Removing Debris/ demolished materials to a distance exceeding 1.5 Km but not exceeding 5 KM outside MOD Land complete all as specified and directed.

M&L in repair 8 mm thick laminated wood-plastic composite (WPC) flooring/wall panelling as per approved sample with interlocking pannels including any type of profiles required to fix the panels, surface with glossy finish complete all as specified and directed. Note : Make & quality as approved by GE.

S&F in repair PVC connection 15mm dia 45cm long with 2 Nos PTMT checknuts with washer complete all as specified and directed.

S&F in repair 15 mm dia PVC bib tap standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm dia bib tap brass chromium plated complete all as specified and directed.

S&F in repair 15mm dia pillar tap fancy type brass chromium plated with fly nut capstan head screwed complete all as specified and directed.

S&F in repair 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required and making good to match with existing surface complete all as specified and directed.

S&F in repair 15 mm dia brass angle valve chromium plated complete all as specified and directed.

S&F in repair 15mm dia ball valve high pressure of PTMT with aluminum rod and polyplast ball complete all as specified and directed.

All as per item Ser No 42.00 above but 20mm dia.

S&F in repair 32 mm dia waste fittings brass chromium plated complete all as specified and directed.

All as per item Ser No 44.00 above but 40mm dia.

S&F in repair 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

All as per item Ser No 46.00 above but 40mm dia.

S&F in repair 10 litres capacity PVC low level flushing cistern with syphone handled level PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repair flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and directed.

S&F in repair PVC syphone kit with handle complete for low level flushing cistern complete all as specified and directed.

S&F in repair brass chromium plated jet spray with 1mm long tube for single syphonic EWC complete all as specified and directed.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm excluding CI/MS brackets complete all as specified and directed.

S&F in repair brass chromium plated bottle trap 32 mm dia including jointing to waste pipe & fitting complete all as specified and directed.

S&F in repair brass CP grating 125 mm dia round fix on floor / nahani trap fixed with cement morter complete all as specified and directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.

S&F in repairs vitreous china water closet Indian type (Orissa Pattern) 580 x 440mm white with 'P' or 'S' trap front or back inlet footrest including of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe etc complete all as specified and directed

S&F in repair vertical veniation blind consisting of aluminium head rail, vanes/louvers 4” wide of approved tint and traverse cord fixed in position complete all as specified and directed.

Easing of door/windows shutters (without taking off) of not exceeding 1 Sqm each for easy closing/opening tightning of hinges or changing the position of hinges adjustments of tower bolts sliding bolts etc complete all as specified and directed.

All as per item Ser No 59.00 above but exceeding 1 Sqm and not exceeding 2 Sqm.

S&F in repairs 300 mm long aluminium alloy anodised sliding door bolt (bolt type), fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

M&L in repairs aluminium sheeting 0.56 mm thick fixed to wooden shutters with brass chromium plated screw including cutting to required size etc complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.

M&L securing glass of any description in existing steel frame with oil based putty including removing of old putty complete all as specified and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rail of size 60mm long including brackets complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

S&F in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 100 mm long aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F in repair 100 mm steel window handles, (Including welding if required) complete all as specified and directed.

S&F in repair 100 mm mild steel Butt hinges medium weight cold rolled complete all as specified and directed.

All as per item Ser No 70.00 above but size 75 mm.

Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for 20mm thick granite (of any type) tiles machine cut in skirting/dado joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair 15 mm bore GI steel tubing medium grade galvanised with all fitting sand fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

All as per item Ser No 77.00 above but 20mm bore.

S&F in repair 500 litres capacity rotational moulded polyethyelene water storage tank three layered (Cylindrical vertical with closed top ) hoisted and fixed in position including disconnecting and refixing the GI pipe and fittings complete all as specified and directed.

All as per Item Ser No 79.00 above but 1000 litres capacity of tank.

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs, cleaning and hoisting if required reconnecting and refixing in position after cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 litres to 500 litres capacity of tanks complete all as specified and directed.

All as per Item Ser No 81.00 above but exceeding 500 litres and not exceeding 1000 litres.

Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing)removing rubbish off the premises complete all as specified and directed.

M&L for 1st quality non skid coloured ceramic tiles 400mm X 400mm X 7mm thick as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 1st quality glazed coloured ceramic tiles 300x200x7mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for light shade coloured fully vitrified tiles 600 x 600mm 10 mm thick, polished, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.

S&F in repair 100 mm long aluminium handles, cast type anodied for aluminium windows complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 Sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.

All as per item Ser No 89.00 above but exceeding 0.50 Sqm.

S&F in repair 5.5mm thick sheet glass of any colour, ordinary quality and glazing with snap beading and gasket etc for aluminium door & window exceeding 0.5 Sqm in each pane complete all as specified and directed.

Taking down and refixing of PVC door shutter (after taking down) loosened at joints of styles, making good and where hinges etc have been removed/loosened from chowkhets or frames and easing etc for complete functional complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete complete all as specified and directed.

M&L for raking out joints of roof tiles including flush pointing in CM 1:3 upto depth of 20 mm including cutting removing vegetation complete all as specified and directed.

M&L welding in repairs (thickness of metal to be welded not exceeding 06 mm) in any situation and in any floor complete all as specified and directed.

S&F in repair rolling shutters thickness laths in 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat primer, erected in position as indicated and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair mortice lock, verticle type of brass size 100mm and 4 levers complete all as specified and directed.

S&F in repairs Viterious China urinals, bowl type (back or corner wall type) of size 465X355X265 mm, complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F in repairs vitreous china Urinal, Half stall type white (excludign flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed.

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimun weight 60 gms) complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty in two layers (each layer minimum 1mm thick) complete all as specified and directed.

Taking down wooden, mild steel, aluminium chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutters from the frame) and making good the distrubed surface complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm and making good to distrubed surface complete all as specified and directed.

S&F pressed steel frames made out of 1.25mm thick MS sheet for doors with one or more rebates of size 105x60 mm including necessary fixing lugs, lock strike plate etc complete complete all as specified and directed.

S&F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per spacification complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in filling hollow portion of pressed steel frame complete all as specified and directed.

S&F factory made solid pannel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gep insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.

S&F 30mm thick wooden flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

M&L for preparation of new wooden or wood based surfaces over 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 100mm mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm aluminum handles cast type, anodized complete all as specified and directed.

S&F 250mm long aluminium alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 50 micron thick podwer coated aluminium grill 6x 45mm thick, section 10cm Centre to Centre spacing complete with U-channel alround fixed in windows with screws complete all as specified and directed.

S&F aluminium anodized section of size 63.5x38.1x1.6mm thick as in frame for aluminium door shutter fixed to walls etc with rawl plugs and steel screws including all cuttings etc for fixing pivot complete all as specified and directed.

S&F aluminium powder coated section swing door partly panneled and partly glazed considering top rail 86.77X44.45X1.60 mm thick bottom and lock rail 150X44.45X1.60mm and style 47.50X44.45X1.60mm any shape including jointing clips, aluminium snap beading, rubber gasket, glazing clips, two aluminium handles per leaf, Al tower bolts 250 mm, one door stopper in each leaf and each side, one floor spring in each leaf dead lock of brass complete all as specified and directed. Note : Glass and prelaminated particle board shall be measered and paid saprately.

S&F Aluminium powder coated anodised (shade or tint as directed by GE) window/ventilator frame section 100x44x2mm fixed with thrust bolt in walls by drilling (any number of leaf) complete comprising the following :- (a) Aluminium anodised (shade or tint as directed by GE) shutter 44x44x2mm top/bottom/sides style. (b) Aluminium anodised butt hinges 4 Nos n each window 100mm size. (c) Aluminium anodised tower bolt 02 Nos in each shutter 150mm long. (d) Aluminium anodised hande 04 Nos in each shutter 150mm long.

S&F 12mm thick particle board exterior grade with decorative choice lamination prelaminated both sides of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed.

S&F 4.8mm thick tinted sheet glass ordinary quality in square/rectangle exceeding 0.5 Sqm each pane and fixed with glazing pins and rubber beading etc in aluminium door/partition etc complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F in extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized alum section 63.50x 38.10 x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised alum snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as specified and directed. (Sheet glass and particle board shall be measured and paid for separately) Note : Area of each panel shall not be exceeding 01 Sqm.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for cleaning and greasing the sides of the rolling shutter of size n. exc 25 Sqm each as well as other moving parts, like spring,roller, wheel etc completed and shutter fully easy functional complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/slabs/blankets any thikness including cover fillets complete all as specified and directed.

M&L for false ceiling with 9 mm thick Gypsum board including providing and fixing pre-painted white LAGYP wall angle trim size 19x24x0.43mm thick fixed to brick wall/partition with the help of nylon sleeve and screw/LAGYP self tapping 25mm or 38mm screw respectively at 610mm centre to centre and suspended LAGYP main runner (Tee) size 24x32x 0.26mm (botton pre-painted) from sofit in one direction with the helpof LAGYP soffit cleat, 8mm steel explained faster, LAGYP Hanger system which incorporates suspended rod with galvanised LAGYP spring adjusting clip at 1220mm centre to centre (bottom pre-painted) is inserted fixed into th slots provided in the main runners (Tee) at 1200mm centres to form 1200x600mm grid and LAGYP short runner (Tee) at 1200mm 24x24x0.26mm and 600mm (bottom pre-painted) is insert into the slots provided in the short runner (tee) at 600mm centre to centre to form 600x600mm grid complete all as specified and directed.

S&F Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including necessary metal frame work complete all as specified and directed.

Complete removal of existing roof treatment in up to depth of original roof slab and removing entire rubbish off the premises, and applying Water proofing treatmnet as under:- (a) Rendering 10mm thick in CM(1:4) mixed with water proofing compound @3% by weight of cement. (b) Applying a coat of approved bituminious primer @0.25 ltr/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/[email protected]/Sqm. (d) Supplying and laying polymeric water proofing membrane of weight not less than 3Kg/Sqm. (e) Applying a coats of solar reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specefied and directed. Note: WPC shall be measured and paid seperately.

M&L for taking down existing treatment and applying Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) including using white cement inplace of grey cement for grit wash complete all as specified and directed.

S&F in repairs of stainless steel (grade 304) hollow sections tubes sections, channels, plates, angles etc and any size and sections in railings, balusters, posts newel posts, running rails etc including necessary welding ,reveting, bolting, grinding, buffing, polishing and making curvature (whereever required) including necessary frameworks required complete all as specified and directed.

S&F in repair on both sides 40 mm thick solid PVC sandwich panel with 1 mm printed PVC sheet on both sides suitably fixed in M S grade framed work as per specification and drawing complete all as specified and directed.

M&L for 2mm thick wall care putty in two layers (each layer minimum 1mm thick) on scrapped/uneven surfaces of any description to match with the existing surfaces complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying two coats of acrylic exterior emulsion (weather proof) paint on walls and other surface including complete all as specified and directed.

Supply only integral water proofing compound/liquid etc complete all as specified and directed.

SAWARIYA ENGINEERS AND CONTRACTORS

V M CONSTRUCTION

Sree Ram Enterprises

DR Buildcon