82549ADDITION ALTERATION TP IT SERVER ROOM INCL PROV OF 04 IN No 02 TON SPLIT AC AT ADMIN BLOCK ADDITION ALTERATION TO 02 UNIT OF MACKERAL VI (VI 2, VI 7) CONVERTING INTO MI ROOM BY REAPPROPRIATION OF BUILDING AT KALPAKKAM UNDER AGE(I) NAVY CHENNAI

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Demolition of cement Concrete in ground floorsand Shelves (Reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in levelling course over sub base complete all as specified and as directed.

M & L 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate ) in Flooring and finishing the surface even and smooth without using extra cement complete all as specified.

Dismantling of wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor complete all as specified and as directed.

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 350 x 250mm x7mm/450 X 350 X 7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10mm thick plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in dado complete all as specified and as directed..

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in Skirting, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including rendering 10mm thick of cement mortar 1:4 complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM 1:6 ccomplete all as specified and as directed.

M&L for removing of debries any description obtained from demolition beyond the lead included in the rates including loading unloading to a distance exceeding 1.5Km and not exceeding 2.00 KM out side defence landc omplete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm mm graded stone aggregate as in roof kerbs or mud stops,rounded or chamfered on edges work complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded agg) as in padding concrete to maintain required slope including coving to junctions of parapet and roofs and chajjas complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each(without taking off shutters from the frames) complete all as specified and as directed.

Supply & fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm, wood grain printed PVC sheet used instead of Plain colour PVC sheet & edge reinforced with M.S. Square tube will be painted to match with printed sheet complete all as specified and as directed.

Supply & Fix Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face as per specification complete all as specified and as directed.

S&F 100 mm butt hinges, medium weight, stainless steel fixed complete all as specified and as directed.

S&F 125 mm size,Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 125 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S & F of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators for Sliding windows including Rollers providing and and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S & F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S & F of 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed complete all as specified and as directed.

S & F of 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S&F sheet glass ordinary quality 4.00mm thick, in squares n exc. 0.5 sqm each pane fixed to aluminium frame complete all as specified and as directed..

S&F sheet glass ordinary quality 4.00mm thick, in squares exc. 0.5 sqm each pane fixed to aluminium frame complete all as specified and as directed.

S & F of Door closer hydraulically regulated of Extruded Aluminium Section, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F of brass 4- levers Mortice lock, vertical type, size 100 mm complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed..

S & F of 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F of 12mm thick Toughned glass as in hinged doors, partitions, In Cupboard Shelves automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

S & F of 12mm thick Toughned glass as in hinged doors, partitions, Shelves automatic doors and size not exc 02 Sqm Each similar work including cutting to shape, drilling holes, including acid finish for the entire surface with white acid leaving tag line of approx. 300X300mm size using suitable stencil etc required complete all as specified and as directed.

S & F of Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F Stainless Steel pipe 25mm dia curtain Rod for windows, doors Opening etc complete all as specified and as directed.

S & F Fancy type Stainless steel Glossy Matte Series Curtain Bracket for fixing curtain rod including clampscomplete all as specified and as directed.

S&F in repair aluminium anodised tubular rail 20mm dia D type 60cm long between flanges including per pair brackets for each towel rail complete all as specified and as directed..

S & F 150 mm door stopper of Stainless Steel body, with rubber bush complete all as specified and as directed.

S & F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed..

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding , low level flushing cistern and Flush pipe of 32mm dia but including seat cover) complete all as specified and as directed.

S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long ccomplete all as specified and as directed.

S&F in repair vitreous china, wash hand basin white flat back size 550 x 400 mm white complete waste, chain and pug and precelain stopper including bracket complete all as specified and as directed..

Supply & fixing in repairs fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe complete all as specified and as directed.

Supply & fixing only 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and complete all as specified and as directed.

Supply & fixing only 40mm waste fittings brass of chromium plated for Sink etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and fixed complete all as specified and as directed.

S&F for 32 mm bore High density polythylene pipes (HDPE) of pressure rating 6Kgf/cm2 fixed compete to in walls, floors,ceilings etc complete all as specified and as directed.

S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and as directed..

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Angle valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

M & L brick work with modular flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and as directed complete all as specified and as directed..

M & L brick work with modular flyash bricks straight or curved on plan exc 6 m mean radiusin half brick thick walls built in CM 1 : 6 complete all as specified and as directed.

M & L Rendering for 10mm thick in cement mortar (1:6) on other than fair faces of internal bricks or concrete surfaces finished even and smooth with using extra cement all as specified and as directed.

M&L for rendering 15 mm thick in cm 1:4 . mixed with water proofing @ 2% by weight of cement with fair & even plasters finshes. (Note :- WPC will be measured separately).

M & L Rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered / concrete surfaces by vacuum based sanding machine and applying two coats of oil bound distemper over a coat of primer over one or more coat of 3mm tk wall care putty using mechanical tool/auto roller complete all as specified and directed by Engineer-in-Charge. (Make :- Interion grade acrylic emulsion shall be of the make : Asian paints "Premium Emulsion", Nerolac Paints "Beauty Gold Acrylic Emulsion, ICI Dulux "Super Smooth Acrylic Emulsion, Berger " Rangoli Acrylic Emulsion). Note: All work shall be carried out by manufacture/approved applicator of paint manufacturer only. After opening of financial bid (Cover 2) and prior to acceptance of work the lowest bidder shall submit MoU from the manufacture/ authorised applicator. Non submission of MoU within 21 days after opening of financial bid(Cover 2) the work shall constitute sufficient ground for retender.

Material & Labour prepartion of new plastered surface by vacuum based sanding machine and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using mechanical tool/auto roller complete all as specified and directed by Engineer-in-Charge. Note: All work shall be carried out by manufacture/approved applicator of paint manufacturer only. After opening of financial bid (Cover 2) and prior to acceptance of work the lowest bidder shall submit MoU from the manufacture/ authorised applicator. Non submission of MoU within 21 days after opening of financial bid(Cover 2) the work shall constitute sufficient ground for retender.

M & L Preparing newly plastered surfaces of celings and applying three coats of white wash complete all as specified and as directed.

M & L Preparing newly plastered surfaces of Walls and applying three coats of white wash complete all as specified and as directed.

M & L complete removal of existing treatment and preparation on walls by vacuum based sanding machine and applying two coats of oil bound distemper over a coat of primer over one or more coat of 3mm tk wall care putty using mechanical tool/auto roller complete all as specified and directed by Engineer-in-Charge. Note: All work shall be carried out by manufacture/approved applicator of paint manufacturer only. After opening of financial bid (Cover 2) and prior to acceptance of work the lowest bidder shall submit MoU from the manufacture/ authorised applicator. Non submission of MoU within 21 days after opening of financial bid(Cover 2) the work shall constitute sufficient ground for retender.

M & L complete removal of existing treatment and preparation on walls by vacuum based sanding machine and applying two coat of PU Enamel over one coat of Primer oil base over two coats of Bison putty on walls using mechanical tool/auto roller complete all as specified and directed by Engineer-in-Charge. Note: All work shall be carried out by manufacture/approved applicator of paint manufacturer only. After opening of financial bid (Cover 2) and prior to acceptance of work the lowest bidder shall submit MoU from the manufacture/ authorised applicator. Non submission of MoU within 21 days after opening of financial bid(Cover 2) the work shall constitute sufficient ground for retender.

M & L Preparing old plastered surfaces of celings and applying one coat of white wash complete all as specified and as directed.

M & L Preparing old plastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

Taking up or down steel tubing 20mm dia bore and connection complete all as specified and as directed.

Taking up or down steel tubing 25mm dia bore and connection complete all as specified and as directed.

M&L for Cutting chases, pinning in , for concealed water tubing on brick or stone walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 20mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 25mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

S & F of Brass Elbow (3/4 X ½) complete all as specified and as directed

S & F of Brass Tee complete all as specified and as directed

Taking down rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc. complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed..

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) branch piece, single (Single 'Y') equal or unequal with access door complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) vent cowl complete all as specified and as directed..

Demolition of stone slabs and tiles of any description or any thickness in floors, skirtings, risers etc laid ,bedded and pointed in any mortar complete all as specified and as directed.

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry in floors and pointed with white cement with admixture of pigment to match the shade of granite stone laid & jointed over and including 20mm cement screed in CM 1:6 complete all as specified and as directed.

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in Skirting for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Providing edge moulding/ Full nosing to 18-20mm thick Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

M & L for Machine cut cudappah stone slab 20-25mm thick Fixed in Shelves mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

M & L for cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over a screed bed of 20mm thick in cement mortar 1:6 complete all as specified and as directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and as directed.

M&L hardcore of gauge of broken stone not exc 63mm deposited ,spread &levelled in layers n exc 15cm thick,watered and rammed to a true surface complete all as specified and as directed.

M & L for 100 mm thick Plain Cement concret of type D2, 1:4:8 (40 mm graded aggregate) in subbase complete all as specified and as directed.

M & L for 100 mm thick Plain Cement concret of type B1, 1:2:4 (20 mm graded aggregate) in Pavement and finishing the surface even and smooth without using extra cement complete all as specified.

M & L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm part including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed..

M & L Precast RCC 1 : 2 : 4 Type B1 ( 20 MM graded aggregate) as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to math complete all as specified and as directed.

S & F TMT steel bars 06 to 08mm dia mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stirrups complete all as specified and as directed.

S & F of 0.80mm thick 304 brushed stainless steel backlight letters colour finished with RF painting with backing of 2mm thick imported acrylic laser cut letter of depth 50mm and height 300mm describing AUSHADHI & height 250mm describing MI ROOM Including LED 3 Eyes C White/2835 Samsung LED Chip/WP-IP68/1.08Watts & Total LED con sumption 202 Nos complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in Hard/Dense soil complete all as specified and as directed

M&L sand filling 50mm thick under paver blocks for cushion Complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement pigment, Complete all as specified and directed.

M & L providing precast cement concrete 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) set in cement mortar 1:6 in window or door cills, lintels, steps coping, kneelers, pier caps, columns, post etc. and setting in mortar complete with joints to match Complete all as specified and directed.

Supply and Fixing of 3mm thick antistatic Polyvinyl chloride sheet in flooring and skirting in approved shade on a smooth and damp proof base using rubber base adhesives like SR 998 or equivalent of approved quality and manufacturer i/c rooling with light wooden roller all complete as Engineer In Charge in approve colour and shade complete all as specified and as directed.

S & F of mild steel Mortice lock, 4 Lever vertical type, size 100 mm complete all as specified and as directed.

SCHEDULE 'A' PART-I [ E/M WORKS]

Taking down copper/aluminum point wiring (light, fan, socket or power) including fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc. complete all as specified and as directed.

Taking down old/existing MCB DB SPN/ TPN with MCB's complete by disconnecting all as specified and directed.

Taking down old sub main wiring with 2runs/4runs of 4/6/10 sqmm aluminum/copper cables including making good disturbed surface all as specified and directed.

M&L for remove of Ceiling Fan /Exhaust Fan and Electric Meter from Existing Place and Refixinfg after Servicing on Same Place all as specified and directed

Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and including non-metallic rigid PVC conduit of 20 mm dia,concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flush box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc witch shall be measured and paid separately all as specified and directed for :-

(a) One light point controlled by one switch with cable 1.5 sqmm size.

(b) One fan point Ceiling fan/Exhaust fan controlled by one regulator / switch with cable 1.5 sqmm size.

(c) One 3 pin socket outlet 5 amps independent with cable 1.5 sqmm size.

(d) One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 sqmm size.

(e) One bell/buzzer point controlled by one push button

All as per item No 115 above but 4 sq mm cable size with 4 sq mm earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board all as specified and as directed.

S & F switch modular 6 amps bell push flush type 1 module complete all as specified and as directed.

M&L Modular switch 1 way 10 A, 1 module complete all as specified and as directed.

M&L Modular switch 1 way 16 A, 1 module complete all as specified and as directed.

S & F Modular socket 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F Modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F only electronic modular fan regulator 120w step type 2 modular complete all as specified and as directed.

S & F modular white cover plate with frame 1 module complete all as specified and as directed.

S & F modular white cover plate with frame 2 module complete all as specified and as directed.

S & F modular white cover plate with frame 3 module complete all as specified and as directed.

S & F modular white cover plate with frame 4 module complete all as specified and as directed.

S & F modular white cover plate with frame 6 module complete all as specified and as directed.

S & F modular white cover plate with frame 8 module complete all as specified and as directed.

S&F Modular Metal flush box 1/2 Module complete all as specified and as directed.

S&F of Modular Metal flush box 3 Module complete all as specified and as directed.

S&F of Modular Metal flush box 4 Module complete all as specified and as directed.

S&F of Modular Metal flush box 6/8 Module complete all as specified and as directed.

Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 2 run of 4 sqmm,1 run of 4 sqmm & one run of PVC conduit shall be measured as single unit

Material and labour for sub main wiring (concealed) complete with two single core 16 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 16 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 2 run of 16 sqmm,1 run of 16 sqmm & one run of PVC conduit shall be measured as single unit

S & F ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed.

S&F Double Door Vertical TPN Distribution Box 4 way complete in SS enclosure with 200 amps rated busbar complete all as specified and as directed.

S&F MCCB 415 Volts, 16 KA breaking capacity, 63 Amp, 4 pole. Complete all as specified and directed by Engineer in Charge.

S&F MCB DB SPN 12 way complete in SS enclosure double door type with 200 amps rated busbar. complete with all as specified and directed by Engr-in-Charge.

S & F RCBO DP,100mA, 240 volts 63 Amps with Front face indication for earth leakage fault IP 20 protected terminals 35 sq mm terminals Sliding shutters. Complete all as specified and as directed by Engr-in-charge.

S & F MCB SP 230 volts 5- 40 Amps with 10KA breaking capacity complete all as specified and as directed.

S & F MCB SP 230 volts 63 Amps with 10KA breaking capacity complete all as specified and as directed.

Material and labour for telephone sockets special type complete all as specified and as directed.

Material and labour for TV sockets special Modular flush type complete all as specified and as directed.

Material and labour for PVC conduit 20 mm dia (For TV and data cable) complete all as specified and as directed.

Material and labour for Junction box(1 to 4 way) for TV/Tele wiring complete all as specified and as directed.

S & F LED light fitting 4feet,1x20w,a trendy wall mounted battern,with extruded aluminum housing, with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make:- Crompton Cat Part NoLTTB4F20WLED/W or equivalent make as mention in Ps & as approved by AGE(I).

S & F LED light fitting 2 feet,1x10w,230v,a trendy wall mounted battern,with extruded aluminium housing,with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make Crompton Cat Part N0:TTB2F10WLED/W or equivalent make as mention in Ps & as approved by AGE(I).

S & F Energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser, complete all as specified and as directed Make C&S/ Crompton/Havells/Philips/Bajaj.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed by Engr-in-Charge

M&L for Cutting the existing wall for fitting color for exhaust fan and making good disturbed surfaces inner and outer of wall Complete all as specified and as directed by Engr-in-Charge.

S & Material For Angle holder ,PVC /Polycarbonate type With LED bulb 9 Watt all as specified and Directed by Engineer in Charge

M&L for Shifting of split type Air conditioner any capacity including supply & fixing of factory fabricated support suitable to mount out door unit (one pair per AC) and duly making holes into wall for insertion of copper pipe, drain pipe and 3 core cable, and making good the disturbed surfaces complete and including servicing the entire unit all as specified and directed.

Taking down after disconnection of electrical connections etc of the existing Exhaust fan 250mm/300mm sweep of any make and checking fault and fixing back in position after carrying out all repair works including connecting up complete all as specified and directed by Engineer in Charge.

M/L for providing earthling complete with copper plate electrode 600 mm x 600 mm x3.15mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level ,Alternate layers of charcoal) & common salt Crystal and connected to Copper earth strip 20x3mm by means of bolts, nuts, check nuts & washers of copper and connecting to earth dolly all as shown in electrical plate No. 3of SSR Part I of 2009 & testing complete including 40mm dia light grade GI pipe up to 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , including 20 mm bore water pipe medium grade GI Tubing including GI Funnel , wire mesh etc. ( NOTE :- Earth continuity conductor and GI protection pipe beyond 7.5m shall be measured and paid under the respective items ).all as directed by Engineer- in charge.

Supply and install, panel Sheet metal box size 0.7 x 0.45 x 0.18m for existing Energy meter indoor type dust and vermin proof fabricated out of CRCA sheet not less than 3.15 mm thick fixed on angle iron frame of size 50x50x6mm duly powder coated complete with all as specified and directed by Engr-in-Charge.

Supply and fixing of single pole and neutral encloser with a two pin and earth plug and socket complete with one single pole MCB 240V, 20Amps complete with all as specified and directed by Engr-in-Charge.

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 3core 10Sqmm complete all as specified and directed

Supply and fixing SMC Box size 200 X140 X95 mm internal size with hinged door(L) with 1 No PVC connector 4 way 16 Amps and 1 Nos MCB SP 6 Amps including fixing bracket,Nut,Bolts etc complete Make : Sintex Cat part No GSJB2014 or Equivalent.

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth for foundations or laying under ground cable, pipes etc. and getting out in soft/loose soil etc.Complete all as specified and directed by Engr-in-harge.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc25 cm in any type of soil.Complete all as specified and directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

Supply and fixing High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m of size 40 mm for cable protection laid in trenches complete all as specified and directed

Supply and Laid in trenches GI pipe Light gread 40mm dia as for Road Crossing of Cable/ PTL Fitting

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

M&L for Cutting the existing road for passing pipe and making good the disturbed surfaces by using 15 mm thick 1:4:8 in foundation type D-2 ( using 40mm graded crushed stone aggregate) as in mass concrete complete all as specified exists complete all as specified.

M&L for PCC 1:2:4 type B1 (20mm graded stone aggregate) as in sub base, complete all as specified and as directed.

Supply and Fix MCB TPN 415 volts 63 Amps with 10KA breaking capacity C curve complete all as specified and as directed.

Supply and fix MCB SPN 6 to 32 A , C curve complete all as specified and as directed.

Supply and Fixing Copper Paper 25mm wide griding size 30cm x 30cm distance laying on floor size (6mtr x 2.4 mtr) and connected to earth point complete all connected accessories including all as directed by Engr-in-Charge.

M/L for providing CHEMICAL earthing complete with copper plate electrode 900 mm x 600 mm x5mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level ,Alternate layers of Chemical and connected to Copper earth strip 32 x 6mm by means of bolts, nuts, check nuts & washers of copper and connecting to earth dolly all as shown in electrical plate No. 3of SSR Part I of 2009 & testing complete including 40mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , including 20 mm bore water pipe medium grade GI Tubing including GI Funnel , wire mesh etc. ( NOTE :- Earth continuity conductor and GI protection pipe beyond 7.5m shall be measured and paid under the respective items ).all as directed by Engineer- in charge.

Supply ,install and testing split Air conditioner of 2 TR capacity inverter type 4 Star rating with indoor and outdoor units (copper condenser coil, copper cooling coil and evaporator including required length of copper tubing and cables for connecting indoor and outdoor units ) complete with cordless remote control unit , with inverter rotary compressor with inbuilt air ioniser and plazma filter for better indoor air quality complete ,complete all as specified and as directed. Make : VOLTAS / BLUESTAR /CARRIER/ O GENERAL/HITACHI. Note : Rate quoted is inclusive of the following:- (i) Drain pipe UPVC with insulation from indoor unit (at any floor) to ground floor level and is to be fixed with necessary clamps complete. (ii) Drilling hole on the brick wall to facilitate routing of Copper pipe, drain pipe and cable from indoor unit to outdoor unit. (iii) Sealing the hole from outside ,after installation, with white cement. (iv) Pressure testing , cooling performance check and product demonstation. (v) 4 core cable of any required length for connecting indoor and outdoor unit. (vi) Material and labour for fixing Remote stand in wall. (vii) Copper pipe, upto 3.00 Mtr each.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed.

kvs constructions

S Dilli